Page 1 of 9 123 ... LastLast
Results 1 to 10 of 82

Thread: OpenSUSE 11.2 - Unable to burn CD\DVD's

  1. #1

    Default OpenSUSE 11.2 - Unable to burn CD\DVD's

    Hi all I have a new install of OpenSUSE 11.2 and am unable to burn CD's or DVD's.

    I am running Gnome, but have tried both Brasero and K3B. Have ensured that the user I am logged in as is a member of the 'cdrom' group, and have cross checked the permissions on files and devices such as /dev/sr0, /usr/bin/wodim etc. Have also attempted to burn as root with no success.

    Any assistance would be greatly appreciated.


    K3B reports the following:

    - cdrecord has no permission to open the device

    K3B log:

    Devices
    -----------------------
    HL-DT-ST DVDRAM GSA-T50N RX06 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]

    System
    -----------------------
    K3b Version: 1.68.0
    KDE Version: 4.3.1 (KDE 4.3.1) "release 6"
    QT Version: 4.5.3
    Kernel: 2.6.31.5-0.1-desktop

    Used versions
    -----------------------
    cdrecord: 1.1.9

    cdrecord
    -----------------------
    /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
    scsidev: '/dev/sr0'
    devname: '/dev/sr0'
    scsibus: -2 target: -2 lun: -2
    Linux sg driver version: 3.5.27
    Wodim version: 1.1.9
    SCSI buffer size: 64512
    Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
    communication breaks or freezes immediately after that.
    TOC Type: 1 = CD-ROM
    Driveropts: 'burnfree'
    Device type : Removable CD-ROM
    Version : 5
    Response Format: 2
    Capabilities :
    Vendor_info : 'HL-DT-ST'
    Identification : 'DVDRAM GSA-T50N '
    Revision : 'RX06'
    Device seems to be: Generic mmc2 DVD-R/DVD-RW.
    Current: 0x0009 (CD-R)
    Profile: 0x0012 (DVD-RAM)
    Profile: 0x0011 (DVD-R sequential recording)
    Profile: 0x0015 (DVD-R/DL sequential recording)
    Profile: 0x0016 (DVD-R/DL layer jump recording)
    Profile: 0x0014 (DVD-RW sequential recording)
    Profile: 0x0013 (DVD-RW restricted overwrite)
    Profile: 0x001A (DVD+RW)
    Profile: 0x001B (DVD+R)
    Profile: 0x002B (DVD+R/DL)
    Profile: 0x0010 (DVD-ROM)
    Profile: 0x0009 (CD-R) (current)
    Profile: 0x000A (CD-RW)
    Profile: 0x0008 (CD-ROM)
    Profile: 0x0002 (Removable disk)
    Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
    Driver flags : MMC-3 SWABAUDIO BURNFREE
    Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
    Drive buf size : 1053696 = 1029 KB
    Drive DMA Speed: 15773 kB/s 89x CD 11x DVD
    FIFO size : 4194304 = 4096 KB
    Speed set to 4234 KB/s
    Track 01: data 660 MB
    Total size: 758 MB (75:07.25) = 338044 sectors
    Lout start: 758 MB (75:09/19) = 338044 sectors
    Current Secsize: 2048
    ATIP info from disk:
    Indicated writing power: 5
    Is not unrestricted
    Is not erasable
    Disk sub type: Medium Type A, high Beta category (A+) (3)
    ATIP start of lead in: -11634 (97:26/66)
    ATIP start of lead out: 359846 (79:59/71)
    Disk type: Short strategy type (Phthalocyanine or similar)
    Manuf. index: 3
    Manufacturer: CMC Magnetics Corporation
    Blocks total: 359846 Blocks current: 359846 Blocks remaining: 21802
    Starting to write CD/DVD at speed 24.0 in dummy SAO mode for single session.
    Last chance to quit, starting dummy write in 2 seconds.
    1 seconds.
    0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    Sending CUE sheet...
    Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
    CDB: 2A 00 FF FF FF 6A 00 00 1F 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 80 30 05 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.003s timeout 200s
    Writing pregap for track 1 at -150
    write track pad data: error after 0 bytes
    BFree: 1029 K BSize: 1029 K
    Starting new track at sector: 0
    Track 01: 0 of 660 MB written.
    Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
    CDB: 2A 00 00 00 00 00 00 00 1F 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 80 30 05 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.004s timeout 200s
    /usr/bin/wodim: A write error occured.
    /usr/bin/wodim: Please properly read the error message above.
    write track data: error after 0 bytes
    Writing time: 40.862s
    Average write speed 110.4x.
    Fixating...
    WARNING: Some drives don't like fixation in dummy mode.
    Fixating time: 0.004s
    /usr/bin/wodim: fifo had 64 puts and 1 gets.
    /usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

    cdrecord command:
    -----------------------
    /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=24 -sao -dummy driveropts=burnfree -data -tsize=338044s -

  2. #2
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    37,057
    Blog Entries
    16

    Default Re: OpenSUSE 11.2 - Unable to burn CD\DVD's

    Please follow this
    Multi-media and Restricted Format Installation Guide - openSUSE Forums

    Make sure k3b and k3b-codecs are from Packman
    and make sure your priorities are correct as show in the guide and you do this
    ImageBam - Fast, Free Image Hosting and Photo Sharing
    My openSUSE 13.1 KDE Box
    My Articles
    Was I any help? If yes: Click the star below

  3. #3

    Default Re: OpenSUSE 11.2 - Unable to burn CD\DVD's

    Thanks for the response.

    Have applied the changes, even though I had installed the packages through the media 1-Click option. Have verified the repository order and ensured the K3B was installed from Packman.

    This has not resolved the issue and has added a couple of strange new issues. Such as my screen now flickers (goes blank for about 1 sec then comes back on for a few minutes). Having issues ejecting blank CD\DVD disks from the drive.

  4. #4
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    37,057
    Blog Entries
    16

    Default Re: OpenSUSE 11.2 - Unable to burn CD\DVD's

    rpm -qi k3b k3b-codecs
    My openSUSE 13.1 KDE Box
    My Articles
    Was I any help? If yes: Click the star below

  5. #5

    Default Re: OpenSUSE 11.2 - Unable to burn CD\DVD's

    rpm -qi k3b k3b-codecs
    Name : k3b Relocations: (not relocatable)
    Version : 1.68.0 Vendor: PackMan :: Startseite
    Release : 40.pm.41.2 Build Date: Wed 18 Nov 2009 08:23:43 AM EST
    Install Date: Thu 19 Nov 2009 02:21:40 PM EST Build Host: hauseck
    Group : Productivity/Multimedia/CD/Record Source RPM: k3b-1.68.0-40.pm.41.2.src.rpm
    Size : 11876516 License: GPL v2 or later
    Signature : DSA/SHA1, Wed 18 Nov 2009 08:24:25 AM EST, Key ID f899f20d9a795806
    Packager : andflo@links2linux.de
    URL : K3b - The CD Kreator
    Summary : A Universal CD and DVD Burning Application
    Description :
    K3b is a CD burning application that supports Ogg Vorbis, MP3 audio
    files, DVD burning, CDDB, and much more.



    Authors:
    --------
    Sebastian Trueg <trueg@informatik.uni-freiburg.de>
    Thomas Froescher <tfroescher@gmx.de>
    Distribution: main / openSUSE_11.2_Update
    Name : k3b-codecs Relocations: (not relocatable)
    Version : 1.68.0 Vendor: PackMan :: Startseite
    Release : 40.pm.41.2 Build Date: Wed 18 Nov 2009 08:23:43 AM EST
    Install Date: Thu 19 Nov 2009 02:21:43 PM EST Build Host: hauseck
    Group : Productivity/Multimedia/CD/Record Source RPM: k3b-1.68.0-40.pm.41.2.src.rpm
    Size : 172187 License: GPL v2 or later
    Signature : DSA/SHA1, Wed 18 Nov 2009 08:24:25 AM EST, Key ID f899f20d9a795806
    Packager : andflo@links2linux.de
    URL : K3b - The CD Kreator
    Summary : A Universal CD and DVD Burning Application Build Environemnt
    Description :
    K3b is a CD burning application that supports Ogg Vorbis, MP3 audio
    files, DVD burning, CDDB, and much more. This package contains its
    build environment.




    Authors:
    --------
    Sebastian Trueg <trueg@informatik.uni-freiburg.de>
    Thomas Froescher <tfroescher@gmx.de>
    Distribution: main / openSUSE_11.2_Update

  6. #6
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    37,057
    Blog Entries
    16

    Default Re: OpenSUSE 11.2 - Unable to burn CD\DVD's

    That's OK
    Can you do:
    Code:
    zypper lr -d
    But I'd be interested to see what you get if you create a new user account (it can easily be deleted) login there and try.
    My openSUSE 13.1 KDE Box
    My Articles
    Was I any help? If yes: Click the star below

  7. #7

    Default Re: OpenSUSE 11.2 - Unable to burn CD\DVD's

    zypper lr -d
    # | Alias | Name | Enabled | Refresh | Priority | Type | URI | Service
    --+-------------------------------------+-----------------------------+---------+---------+----------+--------+-----------------------------------------------------------------+--------
    1 | Libdvdcss repository | Libdvdcss repository | No | Yes | 99 | rpm-md | Index of /pub/vlc/SuSE/11.2/ |
    2 | NVIDIA Repository | NVIDIA Repository | Yes | Yes | 99 | rpm-md | ftp://download.nvidia.com/opensuse/11.2/ |
    3 | Packman Repository | Packman Repository | Yes | Yes | 90 | rpm-md | Index of /pub/packman/suse/11.2 |
    4 | http-download.opensuse.org-0aa47081 | Updates for openSUSE 11.2-0 | Yes | Yes | 99 | rpm-md | Index of /update/11.2 |
    5 | openSUSE 11.2-0 | openSUSE 11.2-0 | No | No | 99 | yast2 | cd:/// |
    6 | repo-debug | openSUSE-11.2-Debug | No | Yes | 99 | NONE | Index of /debug/distribution/11.2/repo/oss |
    7 | repo-non-oss | openSUSE-11.2-Non-Oss | Yes | Yes | 120 | yast2 | Index of /distribution/11.2/repo/non-oss |
    8 | repo-oss | openSUSE-11.2-Oss | Yes | Yes | 120 | yast2 | Index of /distribution/11.2/repo/oss |
    9 | repo-source | openSUSE-11.2-Source | No | Yes | 99 | NONE | Index of /source/distribution/11.2/repo/oss |

    It is also not working as root user. Will try a newly created user though.

  8. #8

    Default Re: OpenSUSE 11.2 - Unable to burn CD\DVD's

    Newly created user failed with the same error.

  9. #9
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    37,057
    Blog Entries
    16

    Default Re: OpenSUSE 11.2 - Unable to burn CD\DVD's

    Please boot your system in Failsafe and try.
    My openSUSE 13.1 KDE Box
    My Articles
    Was I any help? If yes: Click the star below

  10. #10
    Join Date
    Jun 2008
    Location
    Kln, Deutschland
    Posts
    1,204

    Default Re: OpenSUSE 11.2 - Unable to burn CD\DVD's

    I see the error - /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits. in your output.

    Some (possibly uneducated) suggestions -

    1. Do you have apparmor turned on?
    2. Is the disk already used/damaged/not supported?
    3. Do you have 2xOptical drives on the same bus?
    4. Manually change the drive's "Burnproof" memory in K3b.
    5. Is the partition where /tmp resides full? You need at least 5 gigs free to burn a DVD image I think.
    6. Boot from a liveCD and see if that works.
    7. Try switching between TAO and DAO.
    8. Try switching to the oss version of the burning tools, rather than the packman ones.

    Good luck
    HP dv6645, Nvidia 8400m-gs, KDE 4.

Page 1 of 9 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •