asus a9rp wifi vs. open suse 11.1 (new inormations)

[agyiakos]

My wireless doesen t work. I collected some information about my USB wirwless card:

akos@linux-3j9k:~> dmesg | grep firmware
firmware: requesting zd1211/zd1211b_ub
usb 1-6: firmware version 0x4810 and device bootcode version 0x4802 differ
firmware: requesting zd1211/zd1211b_ur
firmware: requesting zd1211/zd1211b_uphr
zd1211rw 1-6:1.0: firmware version 4725
akos@linux-3j9k:~> sudo /usr/sbin/iwconfig scan
root's password:
scan No such device

akos@linux-3j9k:~> sudo /usr/sbin/iwconfig scan
scan No such device

akos@linux-3j9k:~> /usr/bin/lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0b05:171b ASUSTek Computer, Inc. A9T wireless
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
akos@linux-3j9k:~> /usr/sbin/iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

wmaster0 no wireless extensions.

wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=27 dBm
Retry min limit:7 RTS thrff Fragment thr=2352 B
Power Managementff
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

pan0 no wireless extensions.

akos@linux-3j9k:~> sudo /usr/sbin/iwlist scan
root's password:
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

wmaster0 Interface doesn't support scanning.

wlan0 No scan results

pan0 Interface doesn't support scanning.

akos@linux-3j9k:~>
akos@linux-3j9k:~>

The kernel driver is: zd1211rw, the driver is: zd1211rw.

I think that the driver is good, but I can t start it. (In windows it starts with Fn F2)

Please help to resolve my problem!

[saabman_aero]

Hi,
I am having the exact same problem, I know my network is up as my Windows connects no problem, but SuSe 11.1 just doesn't pick anything up!

"wlan0 no scan results"

I am using a HP pavilion DV4000 with Braodcom BCM4318 running the b43 driver.

Some help would be welcome...

[deltaflyer44]

check out the stickies at the start of this forum

Andy