openSUSE Forums > Network/Internet > Wireless » Intersil Prism 2.5 openSUSE 11 WPA

Go Back   openSUSE Forums > Network/Internet > Wireless
Forums FAQ Members List Search Today's Posts Mark Forums Read


Wireless Questions about wireless networking setup, use, and wireless specific applications

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 09-Jul-2008, 10:29
Puzzled Penguin
 
Join Date: Jul 2008
Posts: 2
tmaruh hasn't been rated much yet
Default Intersil Prism 2.5 openSUSE 11 WPA

Hi forum,

I have a big problem with my wireless lan card on my thinkpad a31.
I read the following howto and manuels but I cannot connect with my wlan card to the access point.

Netgate: Intersil Prism 2.5 Firmware Info Page

Jun Sun's mini-HOWTO on flashing Intersil Prism chipsets

Howto:

Linux-Firmware-Flashen-Prism2.5-Intersil-WPA-HOWTO

My situation:
Code:
dmesg |grep wifi
hostap_pci: Registered netdevice wifi0
wifi0: Original COR value: 0x0
wifi0: NIC: id=0x8013 v1.0.0
wifi0: PRI: id=0x15 v1.1.1
wifi0: STA: id=0x1f v1.7.4
Code:
wifi0: Intersil Prism2.5 PCI: mem=0xf8000000, irq=11
Code:
02:02.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
Code:
hostap_diag wifi0
Host AP driver diagnostics information for 'wifi0'

NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash))
PRIID: id=0x0015 v1.1.1
STAID: id=0x001f v1.7.4 (station firmware)
I got this error code through dmesg:

Code:
dmesg |grep wifi
hostap_pci: Registered netdevice wifi0
wifi0: Original COR value: 0x0
wifi0: NIC: id=0x8013 v1.0.0
wifi0: PRI: id=0x15 v1.1.1
wifi0: STA: id=0x1f v1.7.4
wifi0: Intersil Prism2.5 PCI: mem=0xf8000000, irq=11
wifi0: registered netdevice wlan0
wifi0: LinkStatus=2 (Disconnected)
wifi0: LinkStatus: BSSID=00:20:e0:8d:b5:a9
wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
wifi0: LinkStatus=2 (Disconnected)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: LinkStatus=2 (Disconnected)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: LinkStatus=2 (Disconnected)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: LinkStatus=2 (Disconnected)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: LinkStatus=6 (Association failed)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: LinkStatus=2 (Disconnected)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: LinkStatus=2 (Disconnected)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: LinkStatus=6 (Association failed)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: LinkStatus=2 (Disconnected)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
My solution about the dmesg report the wpa didn't work properly.

Have anybody an idea?

Regards Thorsten
Reply With Quote
  #2 (permalink)  
Old 06-Aug-2008, 11:10
Puzzled Penguin
 
Join Date: Aug 2008
Posts: 3
furlongm hasn't been rated much yet
Default Re: Intersil Prism 2.5 openSUSE 11 WPA

I have the exact same problem, did you find a solution for this?
Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




 

Search Engine Friendly URLs by vBSEO 3.3.0 RC2