can only boot in safe mode

[signetone]

Originally Posted by swerdna

Then run as root this first:

startx

Backtrace
0: X(xf86SigHandler+0*65) [0*47eca5]
1: /lib64/lib.so.6 [0*7etc]
2: /usr/lib64/xorg/modules//drivers/intel_drv.so [0* etc]
3: /usr/lib64/xorg/modules//drivers/intel_drv.so [0* etc]
4: /usr/lib64/xorg/modules//drivers/intel_drv.so [0* etc]
5: X(AddScreen+0*1c9) [0* etc]
6: X(InitOutput+0*241 [0* etc]
7: X (main+0*286 [0* etc]
8: /lib64/libc.so.6(__libc_start_main+0xe6) [0* etc ]
9: X [0*etc]

[swerdna]

I am as lost as you. We must wait now for the X-perts .

[FeatherMonkey]

From safe mode post the output of

zypper lr

Also what do you mean

...sax2 states that there is no X server...

It always says something similar normally it finishes that with no X server running.

Also to log in as user just the same as root but with your user name.

Also post the /var/log/Xorg.0.log but after trying to boot normally also the tail when trying a normal boot, it is pointless posting the log from a successful boot. You'll have to save the content in a file then boot in from safe mode so something like

cat /var/log/Xorg.0.log > xlog.txt
cat /var/log/boot.msg > boot.txt

[signetone]

Originally Posted by swerdna

I am as lost as you. We must wait now for the X-perts .

ok many thanks for help

[signetone]

Originally Posted by FeatherMonkey

From safe mode post the output of

zypper lr

Also what do you mean It always says something similar normally it finishes that with no X server running.

Also to log in as user just the same as root but with your user name.

Also post the /var/log/Xorg.0.log but after trying to boot normally also the tail when trying a normal boot, it is pointless posting the log from a successful boot. You'll have to save the content in a file then boot in from safe mode so something like

cat /var/log/Xorg.0.log > xlog.txt
cat /var/log/boot.msg > boot.txt

thanks i will try this and get back

thanks

[signetone]

Originally Posted by FeatherMonkey

From safe mode post the output of

zypper lr

Also what do you mean It always says something similar normally it finishes that with no X server running.

Also to log in as user just the same as root but with your user name.

Also post the /var/log/Xorg.0.log but after trying to boot normally also the tail when trying a normal boot, it is pointless posting the log from a successful boot. You'll have to save the content in a file then boot in from safe mode so something like

cat /var/log/Xorg.0.log > xlog.txt
cat /var/log/boot.msg > boot.txt

I assume that this is done from the Konsole terminal

brian@linux-n2vd:~> zypper lr
# | Alias | Name | Enabled | Refresh
---+----------------------+-----------------------+---------+--------
1 | Libdvdcss repository | Libdvdcss repository | Yes | Yes
2 | Packman Repository | Packman Repository | Yes | Yes
3 | openSUSE 11.1-0 | openSUSE 11.1-0 | Yes | No
4 | openSUSE_11.1 | openSUSE_11.1 | Yes | Yes
5 | packman | packman | No | Yes
6 | repo-debug | openSUSE-11.1-Debug | No | Yes
7 | repo-non-oss | openSUSE-11.1-Non-Oss | Yes | Yes
8 | repo-oss | openSUSE-11.1-Oss | Yes | Yes
9 | repo-source | openSUSE-11.1-Source | No | Yes
10 | repo-update | openSUSE-11.1-Update | Yes | Yes
brian@linux-n2vd:~>

[signetone]

I have boot.txt and xlog.txt but too long to post

Any ideas?

[FeatherMonkey]

OK thats fine was just checking that you didn't have an experimental repository.

So next is a normal log in then try startx and save the xorg.log as the example but after you've tried startx. So boot normally..
Login as user and with the password.

startx > startxOput.txt

So I suspect that will just hang give it 30 secs or so, then press ctrl c.
Then ...

sudo cat /var/log/Xorg.0.log > xlog.txt

then the boot so

sudo cat /var/log/boot.msg > bootlog.txt

Then after that the output from cat /etc/X11/xorg.conf this can be done from safe mode also the following can. Then after that post up the rpms installed..

rpm -qa | grep xorg

So in the end you'll have 3 files,
startxOput.txt
xlog.txt
bootlog.txt
All created from a normal start that fails and leaves you in the terminal.
Then in safe mode we want the output from xorg.conf and rpms installed. Now there is a fair bit so I suggest you use a paste bin for all these bits, and post the links ansd we can look over them.

Choose one http://www.google.co.uk/search?q=pas...ient=firefox-a

[signetone]

Originally Posted by FeatherMonkey

OK thats fine was just checking that you didn't have an experimental repository.

So next is a normal log in then try startx and save the xorg.log as the example but after you've tried startx. So boot normally..
Login as user and with the password.

startx > startxOput.txt

So I suspect that will just hang give it 30 secs or so, then press ctrl c.
Then ...

sudo cat /var/log/Xorg.0.log > xlog.txt

then the boot so

sudo cat /var/log/boot.msg > bootlog.txt

Then after that the output from cat /etc/X11/xorg.conf this can be done from safe mode also the following can. Then after that post up the rpms installed..

rpm -qa | grep xorg

So in the end you'll have 3 files,
startxOput.txt
xlog.txt
bootlog.txt
All created from a normal start that fails and leaves you in the terminal.
Then in safe mode we want the output from xorg.conf and rpms installed. Now there is a fair bit so I suggest you use a paste bin for all these bits, and post the links ansd we can look over them.

Choose one pastebin - Google Search

first 3 done and uploaded in the name signetone

[signetone]

last two uploaded
rpm and Xorg

Thanks