OpenSuse11 on HP Compaq 6515b always hang

[macromarship]

Hi. I used Suse10.1,10.3 on my previous laptop. This month I bought new one Hp compaq 6515b and installed Suse11.
At first I installed x64 version, but soonly I found after 5 or 10 minutes and ever shorter. The computer hang totoaly without notice me. Sometimes I found the application is running and I can move my mouse, but nothing is clickable. And keyboard is not functional. After few seconds, the whole system hang and I should restart my laptop by power it down.
I think maybe is the x64's problem. Last night I reinstall suse11-x86 version. Still have the problem. I should say Suse does good job on system configuration. When I use Suse10.3, it took a week to bring up my intel wireless network. But with Susu11, it makes my broadcom wireless works with a simply command and it download the firm automatically. Thanks.

But my problem is how can I use Suse11 on my laptop? I installed windows XP and 2003 server on my laptop too. They are working fine. Don't know why, only Suse(or Linux?) have problem. Can anyone give me a suggestion what should I do? Or otherwise the only way I can do is switch to FC or other distribution to see if they are working.

Here is my hardware configuration:
CPU: AMD Turion(tm) 64 x2 mobile
MEM: 4G
Video: Ati Radeon x1250
network: broadcom 643? (wired/wireless)
harddisk: ST9160821AS
audio: SoundMax Integrated Digital HD Audio

Thanks.

[cbr600]

Is there a common task running?
I have not seen this happen on a dv6772 or dv5-1004?

Do you have the fglrx driver loaded?
Can you post a copy of dmesg?

[macromarship]

Thanks for quick replying.
I haven't install ati driver.


I searched the forum and see some one add 'acpi_os="Linux"' when boot. I added this. Don't know does it help. At least now I can reply the thread here.


Here is the output I use dmsg. Seems I should split it into 2 replies.

Linux version 2.6.25.5-1.1-pae (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-06-07 01:55:22 +0200
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable)
BIOS-e820: 00000000b7fb0000 - 00000000b7fc8000 (reserved)
BIOS-e820: 00000000b7fc8000 - 00000000b7fe7fb8 (ACPI NVS)
BIOS-e820: 00000000b7fe7fb8 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
4224MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c009fc00 for 1024 bytes.
NX (Execute Disable) protection: active
Entering add_active_range(0, 0, 1310720) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 1310720
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 1310720
On node 0 totalpages: 1310720
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 8448 pages used for memmap
HighMem zone: 1072896 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP 000FE0B0, 0024 (r2 HP )
ACPI: XSDT B7FC81BC, 0064 (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: FACP B7FC8084, 00F4 (r4 HP 0944 3 HP 1)
ACPI Error (tbfadt-0453): 32/64X address mismatch in "Pm2ControlBlock": [00008800] [0000000000008100], using 64X [20070126]
ACPI: DSDT B7FC84A4, 11437 (r1 HP SB400 10000 MSFT 3000001)
ACPI: FACS B7FE7D80, 0040
ACPI: SLIC B7FC8220, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: EPTH B7FC8398, 0038 (r1 HP 0944 1 HP 1)
ACPI: APIC B7FC83D0, 0062 (r1 HP 0944 1 HP 1)
ACPI: MCFG B7FC8434, 003C (r1 HP 0944 1 HP 1)
ACPI: TCPA B7FC8470, 0032 (r2 HP 0944 1 HP 1)
ACPI: SSDT B7FD98DB, 0059 (r1 HP HPQNLP 1 MSFT 3000001)
ACPI: SSDT B7FD9934, 0206 (r1 HP PSSTBLID 1 HP 1)
ACPI: DMI detected: Hewlett-Packard
ATI board detected. Disabling timer routing over 8254.
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:8 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:8 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1300480
Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST9160821AS_5MA95CYQ-part2 devfs=mount,dall splash=silent vga=0x31A acpi_os="Linux"
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1993.831 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4009644k/5242880k available (1953k kernel code, 52004k reserved, 1676k data, 264k init, 3145408k highmem)
virtual kernel memory layout:
fixmap : 0xff8b2000 - 0xfffff000 (7476 kB)
pkmap : 0xff400000 - 0xff600000 (2048 kB)
vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0493000 - 0xc04d5000 ( 264 kB)
.data : 0xc02e845a - 0xc048b784 (1676 kB)
.text : 0xc0100000 - 0xc02e845a (1953 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 3998.09 BogoMIPS (lpj=7996180)
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 1224 Objects with 110 Devices 372 Methods 34 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 8 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Booting processor 1/1 ip 4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.31 BogoMIPS (lpj=7980625)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
AMD C1E detected late. Force timer broadcast.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Total of 2 processors activated (7988.40 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
Brought up 2 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
CPU1 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
net_namespace: 548 bytes
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 8 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
Completing Region/Field/Buffer/Package initialization:................................... .................................................. .................................................. ...............................
Initialized 30/34 Regions 0/0 Fields 69/70 Buffers 67/78 Packages (1243 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.........
Executed 9 _INI methods requiring 3 _STA executions (examined 115 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [C08B] (0000:00)
pci 0000:00:12.0: set SATA to AHCI mode
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT]
ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled.

[macromarship]

ACPI: Power Resource [C171] (off)
ACPI: Power Resource [C230] (off)
ACPI: Power Resource [C24C] (on)
ACPI: Power Resource [C395] (off)
ACPI: Power Resource [C396] (off)
ACPI: Power Resource [C397] (off)
ACPI: Power Resource [C398] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:14.2
AppArmor: AppArmor Filesystem Enabled 
ACPI: RTC can wake from S4
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0xffffffff could not be reserved
system 00:0a: ioport range 0x40b-0x40b has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
system 00:0a: ioport range 0x500-0x51f has been reserved
system 00:0a: ioport range 0xc00-0xc01 has been reserved
system 00:0a: ioport range 0xc14-0xc14 has been reserved
system 00:0a: ioport range 0xc50-0xc51 has been reserved
system 00:0a: ioport range 0xc52-0xc52 has been reserved
system 00:0a: ioport range 0xc6c-0xc6c has been reserved
system 00:0a: ioport range 0xc6f-0xc6f has been reserved
system 00:0a: ioport range 0xcd0-0xcdf has been reserved
system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0c: ioport range 0x8000-0x802f has been reserved
system 00:0c: ioport range 0x8100-0x811f has been reserved
system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0d: iomem range 0xcd400-0xcffff has been reserved
system 00:0d: iomem range 0xd2a00-0xd2fff has been reserved
system 00:0d: iomem range 0x0-0x7ffffff could not be reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: 4000-4fff
  MEM window: 0xd0400000-0xd05fffff
  PREFETCH window: 0x00000000c0000000-0x00000000c7ffffff
PCI: Bridge: 0000:00:04.0
  IO window: disabled.
  MEM window: 0xd0000000-0xd00fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
  IO window: 2000-3fff
  MEM window: 0xcc000000-0xcfffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
  IO window: disabled.
  MEM window: 0xc8000000-0xc80fffff
  PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:04.0
  IO window: 0x00001000-0x000010ff
  IO window: 0x00001400-0x000014ff
  PREFETCH window: 0xd4000000-0xd7ffffff
  MEM window: 0xd8000000-0xdbffffff
PCI: Bridge: 0000:00:14.4
  IO window: 1000-1fff
  MEM window: 0xd0100000-0xd03fffff
  PREFETCH window: 0x00000000d4000000-0x00000000d7ffffff
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20
NET: Registered protocol family 2
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
 lapic is not functional.
Could not switch to high resolution mode on CPU 0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 5617k freed
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1218111463.196:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:05.0: Boot video device
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie03]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie03]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie03]
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 12288k, total 16384k
vesafb: mode is 1024x768x32, linelength=4096, pages=4
vesafb: protected mode interface info at c000:9f30
vesafb: pmi: set display start = c00c9fba, set palette = c00ca078
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
input: PC Speaker as /devices/platform/pcspkr/input/input1
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
Write protecting the kernel read-only data: 1432k
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [C001] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZ1] (56 C)
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_atiixp
scsi1 : pata_atiixp

[macromarship]

ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15
ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WC05, max MWDMA2
ata1.00: configured for MWDMA2
scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WC05 PQ: 0 ANSI: 5
ahci 0000:00:12.0: version 3.0
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part 
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609100 irq 16
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: ST9160821AS, 3.BHE, max UDMA/100
ata3.00: 312581808 sectors, multi 16: LBA48 
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      ST9160821AS      3.BH PQ: 0 ANSI: 5
ACPI: Transitioning device [C399] to D3
ACPI: PNP0C0B:00 is registered as cooling_device2
ACPI: Fan [C399] (off)
ACPI: Transitioning device [C39A] to D3
ACPI: PNP0C0B:01 is registered as cooling_device3
ACPI: Fan [C39A] (off)
ACPI: PNP0C0B:02 is registered as cooling_device4
ACPI: Fan [C39B] (on)
ACPI: PNP0C0B:03 is registered as cooling_device5
ACPI: Fan [C39C] (on)
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
ACPI: PCI Interrupt 0000:00:13.5[D] -> <5>sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
 sda1 sda2 sda3 sda4 <<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
 sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.5-1.1-pae ehci_hcd
usb usb1: SerialNumber: 0000:00:13.5
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.5-1.1-pae ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
usb 1-1: new high speed USB device using ehci_hcd and address 2
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=05e3, idProduct=0702
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB TO IDE
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.5-1.1-pae ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.5-1.1-pae ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.25.5-1.1-pae ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000

[macromarship]

usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.25.5-1.1-pae ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
hub 1-0:1.0: unable to enumerate USB device on port 3
hub 1-0:1.0: unable to enumerate USB device on port 5
usb 3-1: new low speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=15d9, idProduct=0a37
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB Mouse
usb 4-1: new full speed USB device using ohci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usb 4-1: New USB device found, idVendor=08ff, idProduct=2580
usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-1: Product: Fingerprint Sensor
usbcore: registered new interface driver hiddev
input: USB Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input3
input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:13.1-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
REISERFS (device sda2): found reiserfs format "3.6" with standard journal
REISERFS (device sda2): using ordered data mode
REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda2): checking transaction log (sda2)
REISERFS (device sda2): Using r5 hash to sort names
REISERFS (device sda2): Removing [60 119617 0x0 SD]..done
REISERFS (device sda2): Removing [60 119615 0x0 SD]..done
REISERFS (device sda2): Removing [60 119614 0x0 SD]..done
REISERFS (device sda2): Removing [38131 119452 0x0 SD]..done
REISERFS (device sda2): Removing [71061 118437 0x0 SD]..done
REISERFS (device sda2): There were 5 uncompleted unlinks/truncates. Completed
scsi 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
tg3.c:v3.91 (April 18, 2008)
ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:10:00.0 to 64
Linux agpgart interface v0.103
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Sleep Button (CM) [C28D]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
ACPI: Lid Switch [C265]
ACPI: AC Adapter [C1EB] (on-line)
ACPI: WMI: Mapper loaded
ACPI: Battery Slot [C1ED] (battery present)
ACPI: Battery Slot [C1EC] (battery absent)
eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:c4:d2:81:2b
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
parport_pc 00:02: activated
parport_pc 00:02: reported by Plug and Play ACPI
parport_pc 00:02: disabled
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ACPI: device:03 is registered as cooling_device6
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input7
ACPI: Video Device [C08D] (multi-head: yes  rom: no  post: no)
ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 21 (level, low) -> IRQ 21
ppdev: user-space parallel port driver
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[d0101000-d01017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:30:00.0 to 64
ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0
scsi 6:0:0:0: Direct-Access     SAMSUNG  MP0402H          0811 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdb] 78242976 512-byte hardware sectors (40060 MB)
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 78242976 512-byte hardware sectors (40060 MB)
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb:<6>Yenta: CardBus bridge found at 0000:02:04.0 [103c:30c2]
 sdb1 sdb2
sd 6:0:0:0: [sdb] Attached SCSI disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
Yenta: ISA IRQ mask 0x0cb8, PCI irq 20
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
cs: IO port probe 0x1000-0x1fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd03fffff
pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd7ffffff
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f9929251410]
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
b43-phy0: Broadcom 4311 WLAN found
phy0: Selected rate control algorithm 'pid'
Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
loop: module loaded
fuse init (API version 7.9)
type=1505 audit(1218082717.079:2): operation="profile_load" name="/bin/ping" name2="default" pid=1803
type=1505 audit(1218082717.543:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1827
type=1505 audit(1218082717.611:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1837
type=1505 audit(1218082717.663:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1846
type=1505 audit(1218082717.703:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1857
type=1505 audit(1218082717.739:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1873
type=1505 audit(1218082717.775:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1879
type=1505 audit(1218082717.815:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1883
type=1505 audit(1218082717.863:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1887
type=1505 audit(1218082717.903:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1893
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x11
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x12
powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x13
powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x1e
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Clocksource tsc unstable (delta = -299886841 ns)
ADDRCONF(NETDEV_UP): eth0: link is not ready
input: b43-phy0 as /devices/virtual/input/input8
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: MAC suspend failed
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
hda-intel: Invalid position buffer, using LPIB read method instead.
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,00000003
  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
CPU1 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,00000003
  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdb1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:1d:0f:7b:06:d8
wlan0: RX authentication from 00:1d:0f:7b:06:d8 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:1d:0f:7b:06:d8
wlan0: RX AssocResp from 00:1d:0f:7b:06:d8 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: CTS protection enabled (BSSID=00:1d:0f:7b:06:d8)
wlan0: switched to short barker preamble (BSSID=00:1d:0f:7b:06:d8)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present

[cbr600]

Looks like your having the problem with riserfs. There are several bug reports about system lockups when riserfs is used. Can you reformat the partitions to ext3 and see if that fixes the stablility?

[macromarship]

Thanks. cbr600.

Yes. I format my harddisk with ext3 and reinstall suse11_x64 version. Now everything seems ok. I have been using it for an hour and it doesn't hang. Before it is VERY unstalbe.
Great Suse, I am fans of it.

Thank you cbr600.