openSUSE Forums > Hardware » No 3D abilities - Suse 11.1 - ASUS M2N68-AM SE2 - Ge 7025

Go Back   openSUSE Forums > Hardware
Reload this Page No 3D abilities - Suse 11.1 - ASUS M2N68-AM SE2 - Ge 7025
Forums FAQ Members List Search Today's Posts Mark Forums Read


Hardware Questions about drivers, peripheral cabling, configuration

Reply
Page 1 of 3 1 23
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 14-Jun-2009, 09:32
Puzzled Penguin
  
Join Date: Jun 2008
Posts: 10
adam_hartling hasn't been rated much yet
Default No 3D abilities - Suse 11.1 - ASUS M2N68-AM SE2 - Ge 7025
I recently setup a new PC with OpenSuse 11.1 32bit with the Gnome desktop. The new system uses the Asus M2N68-AM SE2 motherboard with an intergrated Nvidia Geforce 7025 \ nForce 630a (MCP68 SE).

Using the G02 nvidia drivers wouldn't work properly, was unable to change resolutions etc. I changed to the older G01 drivers meant for Geforce 6XXX and older and I was more succesfully, except I can not use any 3D enabled applcations such as 3D screensavers or games such as Holoracer. I recieve no errors, just no response. The 3D screen saver does not load and the games do not appear.

Using the command "hwinfo --gfxcard", the system reports that it is using device "pci 0x03d6', model "Nvidia VGA Compatible Controller".

Under SAX2 , the card is reported as "VESA Framebuffer Graphics". I'm using a LG L204WT monitor.

Does anyone have any advice on how to enable 3D applications?
Reply With Quote
  #2 (permalink)  
Old 14-Jun-2009, 09:36
BenderBendingRodriguez's Avatar
Wise Penguin
  
Join Date: Jun 2008
Posts: 1,655
BenderBendingRodriguez hasn't been rated much yet
Default Re: No 3D abilities - Suse 11.1 - ASUS M2N68-AM SE2 - Ge 702
Try installing the hard way It's not that hard You know
__________________
How does a linux geek make love??
- unzip; strip; touch; finger; mount; fsck; more; yes; umount; sleep;
Reply With Quote
  #3 (permalink)  
Old 14-Jun-2009, 09:39
ijbreakey's Avatar
Wise Penguin
  
Join Date: Jan 2009
Location: USA Pennsylvania
Posts: 1,001
ijbreakey has great reputationijbreakey has great reputationijbreakey has great reputationijbreakey has great reputationijbreakey has great reputationijbreakey has great reputation
Send a message via ICQ to ijbreakey Send a message via AIM to ijbreakey Send a message via Skype™ to ijbreakey
Default Re: No 3D abilities - Suse 11.1 - ASUS M2N68-AM SE2 - Ge 702
Could you please post a copy of your xorg.conf located at /etc/X11

Take Care,

Ian
__________________
Laptop: Dell Inspiron E1505 | OpenSUSE 11.2/Windows XP | KDE 4.3.3 "3" | Intel CPU T2050 1.6 GHZ | Intel 945GM | 3.2GB RAM
Box: OpenSUSE 11.2/Windows XP | KDE 4.3.3 "3" | Intel Celeron 2.53 GHz | Intel 915G | 1.2 GB RAM
Reply With Quote
  #4 (permalink)  
Old 14-Jun-2009, 09:41
Puzzled Penguin
  
Join Date: Jun 2008
Posts: 10
adam_hartling hasn't been rated much yet
Default Re: No 3D abilities - Suse 11.1 - ASUS M2N68-AM SE2 - Ge 702
Here is my xorg.conf file:


# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Wed May 27 03:15:36 PDT 2009

# /.../
# SaX generated X11 config file
# Created on: 2009-06-13T22:55:10-0300.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "ServerLayout"
Identifier "Layout[all]"
Screen "Screen[0]" 0 0
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
EndSection

Section "Files"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
EndSection

Section "Module"
Load "dbe"
Load "freetype"
Load "extmod"
Load "glx"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "ZapWarning" "on"
EndSection

Section "InputDevice"
Identifier "Keyboard[0]"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Identifier "Mouse[1]"
Driver "mouse"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech Premium Optical Wheel Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "Modes"
Identifier "Modes[0]"
ModeLine "1680x1050" 146 1680 1784 1960 2240 1050 1053 1059 1089 +hsync -vsync
EndSection

Section "Monitor"
Identifier "Monitor[0]"
VendorName "GSM"
ModelName "LG ELECTRONICS L204WT"
UseModes "Modes[0]"
DisplaySize 434 270
HorizSync 30.0 - 83.0
VertRefresh 43.0 - 75.0
Option "CalcAlgorithm" "XServerPool"
Option "DPMS"
Option "PreferredMode" "1680x1050"
EndSection

Section "Device"
Identifier "Device[0]"
Driver "nv"
VendorName "VESA"
BoardName "Framebuffer Graphics"
EndSection

Section "Screen"
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
SubSection "Display"
Modes "default"
EndSubSection
EndSection
Reply With Quote
  #5 (permalink)  
Old 14-Jun-2009, 10:28
ijbreakey's Avatar
Wise Penguin
  
Join Date: Jan 2009
Location: USA Pennsylvania
Posts: 1,001
ijbreakey has great reputationijbreakey has great reputationijbreakey has great reputationijbreakey has great reputationijbreakey has great reputationijbreakey has great reputation
Send a message via ICQ to ijbreakey Send a message via AIM to ijbreakey Send a message via Skype™ to ijbreakey
Default Re: No 3D abilities - Suse 11.1 - ASUS M2N68-AM SE2 - Ge 702
You're clearly not using the Nvidia driver.

Okay this is what you want to do. Go into Yast Software Repositories. Then delete any Nvidia repositories you see.

Next go to here NVIDIA - openSUSE and choose the first one-click For all new NVIDIA cards (Geforce 6 and newer)

Let that do its thing and wait for it to say it was successfully installed. Then, restart.

Choose to boot into failsafe mode. It will be a command prompt with no gui. Login as the root user and then put the root password in.

Then you'll want to run sax2 to recognize the new driver by typing:

Code:
sax2 -r
You'll get to test it to make sure the screen is right, and once everything is done then you'll want to restart by typing:

Code:
shutdown -r now
Boot up regularly (not failsafe) and you should get the NVIDIA logo when you login, or if you have automatic login it will show before the desktop starts loading.

After you're done with all that post back if 3d works. If not we'll try enabling AIGLX.

Take Care,

Ian
__________________
Laptop: Dell Inspiron E1505 | OpenSUSE 11.2/Windows XP | KDE 4.3.3 "3" | Intel CPU T2050 1.6 GHZ | Intel 945GM | 3.2GB RAM
Box: OpenSUSE 11.2/Windows XP | KDE 4.3.3 "3" | Intel Celeron 2.53 GHz | Intel 915G | 1.2 GB RAM
Reply With Quote
  #6 (permalink)  
Old 14-Jun-2009, 12:44
Puzzled Penguin
  
Join Date: Jun 2008
Posts: 10
adam_hartling hasn't been rated much yet
Default Re: No 3D abilities - Suse 11.1 - ASUS M2N68-AM SE2 - Ge 702
hi ijbreakey

Thanks for your suggestions, unfortuanetly there was no success.

I removed all the nvidia entries in the yast software repos config, then ran the one-click install.

I restarted after it had completed and started the failsafe mode. Failsafe mode did load a gui, so I logged in, opened a terminal and changed to runlevel 3.

I tried sax but my system doesn't appear to have that command. So I used sax2 -r. It loaded it's own x service and I went into the 'change configuration' window. When I attempted to change to a higher resolution, the screen messed up and I exited the system.

After the reboot I went back into normal mode, everything seems to be ok. I believe the system decided to use the G01 drivers instaed of the G02. There is still no 3D support.

I'm thinking maybe I should just get a Nvidia card for the pci express socket and not bother with the integrated one.
Reply With Quote
  #7 (permalink)  
Old 14-Jun-2009, 12:49
ijbreakey's Avatar
Wise Penguin
  
Join Date: Jan 2009
Location: USA Pennsylvania
Posts: 1,001
ijbreakey has great reputationijbreakey has great reputationijbreakey has great reputationijbreakey has great reputationijbreakey has great reputationijbreakey has great reputation
Send a message via ICQ to ijbreakey Send a message via AIM to ijbreakey Send a message via Skype™ to ijbreakey
Default Re: No 3D abilities - Suse 11.1 - ASUS M2N68-AM SE2 - Ge 702
Woah you get the gui though so that's good. Post your xorg.conf now, it might be that we simply need to run some configuration commands.

Take Care,

Ian
__________________
Laptop: Dell Inspiron E1505 | OpenSUSE 11.2/Windows XP | KDE 4.3.3 "3" | Intel CPU T2050 1.6 GHZ | Intel 945GM | 3.2GB RAM
Box: OpenSUSE 11.2/Windows XP | KDE 4.3.3 "3" | Intel Celeron 2.53 GHz | Intel 915G | 1.2 GB RAM
Reply With Quote
  #8 (permalink)  
Old 14-Jun-2009, 12:52
Puzzled Penguin
  
Join Date: Jun 2008
Posts: 10
adam_hartling hasn't been rated much yet
Default Re: No 3D abilities - Suse 11.1 - ASUS M2N68-AM SE2 - Ge 702
Current Xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Wed May 27 03:15:36 PDT 2009

# /.../
# SaX generated X11 config file
# Created on: 2009-06-13T22:55:10-0300.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "ServerLayout"
Identifier "Layout[all]"
Screen "Screen[0]" 0 0
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
EndSection

Section "Files"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
EndSection

Section "Module"
Load "dbe"
Load "freetype"
Load "extmod"
Load "glx"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "ZapWarning" "on"
EndSection

Section "InputDevice"
Identifier "Keyboard[0]"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Identifier "Mouse[1]"
Driver "mouse"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech Premium Optical Wheel Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "Modes"
Identifier "Modes[0]"
ModeLine "1680x1050" 146 1680 1784 1960 2240 1050 1053 1059 1089 +hsync -vsync
EndSection

Section "Monitor"
Identifier "Monitor[0]"
VendorName "GSM"
ModelName "LG ELECTRONICS L204WT"
UseModes "Modes[0]"
DisplaySize 434 270
HorizSync 30.0 - 83.0
VertRefresh 43.0 - 75.0
Option "CalcAlgorithm" "XServerPool"
Option "DPMS"
Option "PreferredMode" "1680x1050"
EndSection

Section "Device"
Identifier "Device[0]"
Driver "nv"
VendorName "VESA"
BoardName "Framebuffer Graphics"
EndSection

Section "Screen"
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
SubSection "Display"
Modes "default"
EndSubSection
EndSection
Reply With Quote
  #9 (permalink)  
Old 14-Jun-2009, 13:14
ijbreakey's Avatar
Wise Penguin
  
Join Date: Jan 2009
Location: USA Pennsylvania
Posts: 1,001
ijbreakey has great reputationijbreakey has great reputationijbreakey has great reputationijbreakey has great reputationijbreakey has great reputationijbreakey has great reputation
Send a message via ICQ to ijbreakey Send a message via AIM to ijbreakey Send a message via Skype™ to ijbreakey
Default Re: No 3D abilities - Suse 11.1 - ASUS M2N68-AM SE2 - Ge 702
Nope.. still using the NV driver.

Try rebooting, then erase everything at the GRUB menu and just type the number 3. This will boot you to init 3.

Login as root and then put root password in.

Type

Code:
sax2 -r
and just click okay through everything. Don't try to change the resolution yet.

Once it's done then get to init 5 by typing

Code:
init 5
It will either load the gui or say init 5 has been reached.

If the gui doesn't load then type

Code:
startx
And see if you get a gui. Post back here with xorg.conf after you're done.
__________________
Laptop: Dell Inspiron E1505 | OpenSUSE 11.2/Windows XP | KDE 4.3.3 "3" | Intel CPU T2050 1.6 GHZ | Intel 945GM | 3.2GB RAM
Box: OpenSUSE 11.2/Windows XP | KDE 4.3.3 "3" | Intel Celeron 2.53 GHz | Intel 915G | 1.2 GB RAM
Reply With Quote
  #10 (permalink)  
Old 14-Jun-2009, 13:50
Puzzled Penguin
  
Join Date: Jun 2008
Posts: 10
adam_hartling hasn't been rated much yet
Default Re: No 3D abilities - Suse 11.1 - ASUS M2N68-AM SE2 - Ge 702
No luck, now it's saying i'm using some kind of BIOS driver and it's dropped down to a lower resolution.

# /.../
# SaX generated X11 config file
# Created on: 2009-06-14T15:40:40-0300.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [SaX2] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection

Section "Module"
Load "dri"
Load "dbe"
Load "freetype"
Load "extmod"
Load "glx"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "ZapWarning" "on"
EndSection

Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech Premium Optical Wheel Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
DisplaySize 434 270
HorizSync 30-83
Identifier "Monitor[0]"
ModelName "LG ELECTRONICS L204WT"
Option "DPMS"
Option "PreferredMode" "1680x1050"
VendorName "GSM"
VertRefresh 43-75
UseModes "Modes[0]"
EndSection


Section "Modes"
Identifier "Modes[0]"
Modeline "1680x1050" 144.55 1680 1784 1968 2256 1050 1051 1054 1086
Modeline "1680x1050" 115.00 1680 1728 1760 1840 1050 1053 1059 1079 +HSync -Vsync
Modeline "1280x1024" 138.54 1280 1368 1504 1728 1024 1025 1028 1069
Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066
Modeline "1280x1024" 119.40 1280 1368 1504 1728 1024 1025 1028 1063
Modeline "1280x1024" 113.00 1280 1328 1360 1440 1024 1027 1034 1061 +HSync -Vsync
Modeline "1280x1024" 108.88 1280 1360 1496 1712 1024 1025 1028 1060
Modeline "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002
Modeline "1280x960" 120.84 1280 1368 1504 1728 960 961 964 999
Modeline "1280x960" 110.95 1280 1360 1496 1712 960 961 964 997
Modeline "1280x960" 105.75 1280 1328 1360 1440 960 963 967 994 +HSync -Vsync
Modeline "1280x960" 102.10 1280 1360 1496 1712 960 961 964 994
Modeline "1152x864" 104.99 1152 1224 1352 1552 864 865 868 902
Modeline "1152x864" 96.77 1152 1224 1344 1536 864 865 868 900
Modeline "1152x864" 89.56 1152 1224 1344 1536 864 865 868 897
Modeline "1152x864" 86.75 1152 1200 1232 1312 864 867 871 895 +HSync -Vsync
Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895
Modeline "1024x768" 81.80 1024 1080 1192 1360 768 769 772 802
Modeline "1024x768" 76.16 1024 1080 1192 1360 768 769 772 800
Modeline "1024x768" 69.71 1024 1080 1184 1344 768 769 772 798
Modeline "1024x768" 69.50 1024 1072 1104 1184 768 771 775 796 +HSync -Vsync
Modeline "1024x768" 64.11 1024 1080 1184 1344 768 769 772 795
Modeline "800x600" 48.91 800 840 920 1040 600 601 604 627
Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625
Modeline "800x600" 44.00 800 848 880 960 600 603 607 622 +HSync -Vsync
Modeline "800x600" 42.11 800 840 920 1040 600 601 604 623
Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622
EndSection


Section "Device"
BoardName "Vesa-BIOS Graphics"
Driver "vesa"
Identifier "Device[0]"
VendorName "VESA"
EndSection


Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection


Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Screen "Screen[0]"
EndSection


Section "DRI"
Group "video"
Mode 0660
EndSection
Reply With Quote
Reply
Page 1 of 3 1 23

Bookmarks

Tags
nvidia


« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - openSUSE Forums - Archive - Privacy Statement - Top
© 2007 Novell, Inc. All Rights Reserved. This site uses the YAML CSS framework. All times are GMT -6. The time now is 10:33.
About openSUSE | Disclaimers | Feedback

Founded by Novell
 

Search Engine Friendly URLs by vBSEO 3.3.0 RC2