D-bus and dhcpcd error after login

[fitlad]

I'm currently running opesuse 11.3 xfce i586 version. When I log-in gksu asks me to enter my root password then I receive a dhcpcd bug as follows:

Could not connect to wicd's D-bus interface. Check the wicd log for error messages

and

The wicd daemon has shut down. The UI will not function properly until it is started

.
Then I noticed that not only wicd was affected by this bug, blueman and xfce-power-manager stopped working too.
I started investigating this issue by checking some log fies in the filesystem, the first file I checked was localmessages stored in /var/log/ and this is what I found:

Feb 14 20:35:18 lg dhcpcd[3159]: wlan0: dhcpcd already running on pid 3147 (/var/run/dhcpcd-wlan0.pid)
Feb 14 20:35:18 lg dhcpcd[3159]: wlan0: exiting
Feb 14 20:40:54 lg dhcpcd[12002]: wlan0: sending signal 15 to pid 3147
Feb 14 20:40:54 lg dhcpcd[3147]: wlan0: received SIGTERM, stopping
Feb 14 20:40:54 lg dhcpcd[3147]: wlan0: removing default route via 192.168.1.1 metric 0
Feb 14 20:40:54 lg dhcpcd[3147]: wlan0: removing route to 169.254.0.0/16 metric 0
Feb 14 20:40:54 lg dhcpcd[3147]: wlan0: removing IP address 192.168.1.2/24
Feb 14 20:40:54 lg dhcpcd[12002]: wlan0: exiting

The second file was wicd.log stored in /var/log/wicd/ and this is what I found:

2011/02/14 20:35:03 :: ---------------------------
2011/02/14 20:35:03 :: wicd initializing...
2011/02/14 20:35:03 :: ---------------------------
2011/02/14 20:35:03 :: wicd is version 1.7.0 552
2011/02/14 20:35:03 :: setting backend to external
2011/02/14 20:35:03 :: trying to load backend external
2011/02/14 20:35:03 :: successfully loaded backend external
2011/02/14 20:35:03 :: trying to load backend external
2011/02/14 20:35:03 :: successfully loaded backend external
2011/02/14 20:35:03 :: Automatically detected wireless interface wlan0
2011/02/14 20:35:03 :: setting wireless interface wlan0
2011/02/14 20:35:03 :: automatically detected wired interface eth0
2011/02/14 20:35:03 :: setting wired interface eth0
2011/02/14 20:35:03 :: setting wpa driver wext
2011/02/14 20:35:03 :: setting use global dns to False
2011/02/14 20:35:03 :: setting global dns
2011/02/14 20:35:03 :: global dns servers are None None None
2011/02/14 20:35:03 :: domain is None
2011/02/14 20:35:03 :: search domain is None
2011/02/14 20:35:03 :: setting automatically reconnect when connection drops True
2011/02/14 20:35:03 :: Setting dhcp client to 0
2011/02/14 20:35:03 :: Wireless configuration file found...
2011/02/14 20:35:03 :: Wired configuration file found...
2011/02/14 20:35:03 :: chmoding configuration files 0600...
2011/02/14 20:35:03 :: chowning configuration files root:root...
2011/02/14 20:35:03 :: Using wireless interface...wlan0
2011/02/14 20:35:03 :: Using wired interface...eth0
2011/02/14 20:35:09 :: Autoconnecting...
2011/02/14 20:35:09 :: No wired connection present, attempting to autoconnect to wireless network
2011/02/14 20:35:10 :: trying to automatically connect to...Qtel-3G-WIFI-344A
2011/02/14 20:35:10 :: Connecting to wireless network Qtel-3G-WIFI-344A
2011/02/14 20:35:11 :: Putting interface down
2011/02/14 20:35:11 :: Releasing DHCP leases...
2011/02/14 20:35:11 :: Setting false IP...
2011/02/14 20:35:11 :: Stopping wpa_supplicant
2011/02/14 20:35:11 :: Flushing the routing table...
2011/02/14 20:35:11 :: Putting interface up...
2011/02/14 20:35:13 :: Generating psk...
2011/02/14 20:35:13 :: Attempting to authenticate...
2011/02/14 20:35:16 :: Running DHCP with hostname lg
2011/02/14 20:35:18 :: 
2011/02/14 20:35:18 :: DHCP connection successful
2011/02/14 20:35:18 :: not verifying
2011/02/14 20:35:18 :: Connecting thread exiting.
2011/02/14 20:35:22 :: Sending connection attempt result Success
2011/02/14 20:40:30 :: ---------------------------
2011/02/14 20:40:30 :: wicd initializing...
2011/02/14 20:40:30 :: ---------------------------
2011/02/14 20:40:30 :: wicd is version 1.7.0 552
2011/02/14 20:40:30 :: setting backend to external
2011/02/14 20:40:30 :: trying to load backend external
2011/02/14 20:40:30 :: successfully loaded backend external
2011/02/14 20:40:30 :: trying to load backend external
2011/02/14 20:40:30 :: successfully loaded backend external
2011/02/14 20:40:30 :: Automatically detected wireless interface wlan0
2011/02/14 20:40:30 :: setting wireless interface wlan0
2011/02/14 20:40:30 :: automatically detected wired interface eth0
2011/02/14 20:40:30 :: setting wired interface eth0
2011/02/14 20:40:30 :: setting wpa driver wext
2011/02/14 20:40:30 :: setting use global dns to False
2011/02/14 20:40:30 :: setting global dns
2011/02/14 20:40:30 :: global dns servers are None None None
2011/02/14 20:40:30 :: domain is None
2011/02/14 20:40:30 :: search domain is None
2011/02/14 20:40:30 :: setting automatically reconnect when connection drops True
2011/02/14 20:40:30 :: Setting dhcp client to 0
2011/02/14 20:40:30 :: Wireless configuration file found...
2011/02/14 20:40:30 :: Wired configuration file found...
2011/02/14 20:40:30 :: chmoding configuration files 0600...
2011/02/14 20:40:30 :: chowning configuration files root:root...
2011/02/14 20:40:30 :: Using wireless interface...wlan0
2011/02/14 20:40:30 :: Using wired interface...eth0

When I tried to reboot my machine as average user, I was asked again insert my root password! I would appreciate the opensuse community support to help me debugging/fixing this issue. Thanks

[fitlad]

I forgot to say that before I posted this thread I already followed the advice given in [wicd] how to grant non-root users the wicd access ?

A check of Yast runlevels indicates that wicd is starting in levels 2, 3 and 5, which seems right. There is also a B level, presumably boot, clicking on that, and hal and dbus, fixes the problem. Wicd now starts on boot.
So, Yast -- System Services(Runlevel) -- Expert Mode -- Highlight WICD -- click on B -- accept popup re hal and dbus -- reboot.

However, it didn't fix my problem. Wicd does not throw this error at every boot for me. At times, it does not ask for the root password and connects successfully.

[nrickert]

As a general comment, it might have been better to have "wicd" somewhere in your subject line, since your question pertains to that.

I've only briefly experimented with wicd, so I might not be able to provide much help.

The particular message "Could not connect to wicd's D-bus interface. Check the wicd log for error messages" seems to be one that you standardly get if wicd is not running when you login. The wicd client attempts to start it (asks for root permission), but I still get that message. If I then logout of KDE and login again, I can then use wicd.

Since setting wicd to start automatically at run level 5, I no longer see that message, and it seems to work. However, I haven't experimented enough to be sure.

I did go into yast, and set the network cards to use "ifup" rather than "NetworkManager". I'm not sure if that is needed, but it does prevent any chance of interference between NetworkManager and wicd. It seems to still be possible to use wicd.

I have not yet discovered any advantage to wicd over NetworkManager, except that I can use "ifup" so that when at home the system connects to my home network before I login to KDE (due to the "ifup").

I will probably revert to using NetworkManager after a little more experimentation.

[fitlad]

Thanks nrickert for the quick respond, you're right I should have mentioned "wicd" in the subject line. Also, I believe now that the root cause of this bug is neither caused by wicd nor d-bus; it's actually caused by the failure to start up of hal-daemon during boot. I reached that conclusion because I remembered the first error message appeared on screen was unexpected/sudden stop of hal. I tried to search for a newer version of hal to upgrade hoping it may fix this bug but I didn't find any newer package at opensuse.org find additional packages feature. Any Suggestion?

The only reason why I prefer wicd over networkmanager because I'm an xfce user and I prefere to avoid installing kde/gnome apps which require installing additional libraries.

As a general comment, it might have been better to have "wicd" somewhere in your subject line, since your question pertains to that.

I've only briefly experimented with wicd, so I might not be able to provide much help.

The particular message "Could not connect to wicd's D-bus interface. Check the wicd log for error messages" seems to be one that you standardly get if wicd is not running when you login. The wicd client attempts to start it (asks for root permission), but I still get that message. If I then logout of KDE and login again, I can then use wicd.

Since setting wicd to start automatically at run level 5, I no longer see that message, and it seems to work. However, I haven't experimented enough to be sure.

I did go into yast, and set the network cards to use "ifup" rather than "NetworkManager". I'm not sure if that is needed, but it does prevent any chance of interference between NetworkManager and wicd. It seems to still be possible to use wicd.

I have not yet discovered any advantage to wicd over NetworkManager, except that I can use "ifup" so that when at home the system connects to my home network before I login to KDE (due to the "ifup").

I will probably revert to using NetworkManager after a little more experimentation.

[fitlad]

It's worth mentioning that if run yast2>system services (runlevel) after the bug message in order to manually start hal-daemon, then I can start wicd, blueman and xfce-power-manager.

[nrickert]

Also, I believe now that the root cause of this bug is neither caused by wicd nor d-bus; it's actually caused by the failure to start up of hal-daemon during boot.

Interesting. Yes, I expect a haldaemon failure would cause such problems. Is anything relevant being logged? (The only logged info I find on hald are in /var/log/boot.omsg, and seem to be relevant only to the current boot). Failures of hald could hint at hardware problems.

The only reason why I prefer wicd over networkmanager because I'm an xfce user and I prefere to avoid installing kde/gnome apps which require installing additional libraries.

Yes, I realized that after I had posted my last reply. I tried xfce, and rather liked it. But I switched to KDE to have NetworkManager (I didn't think of installing wicd at that time). I am reasonably happy with KDE. I especially like the feature that I can set it to automatically disable the synaptics touchpad if there is as mouse plugged in.

[fitlad]

Interesting. Yes, I expect a haldaemon failure would cause such problems. Is anything relevant being logged? (The only logged info I find on hald are in /var/log/boot.omsg, and seem to be relevant only to the current boot). Failures of hald could hint at hardware problems.


Yes, I realized that after I had posted my last reply. I tried xfce, and rather liked it. But I switched to KDE to have NetworkManager (I didn't think of installing wicd at that time). I am reasonably happy with KDE. I especially like the feature that I can set it to automatically disable the synaptics touchpad if there is as mouse plugged in.

nrickert, would you recommend that I should wait for this bug to occur again in order to copy the content of /var/log/boot.omsg and post it here for further analysis?

[nrickert]

That's probably the best idea. If haldaemon fails or doesn't start, then post anything related to it from boot.omsg. Maybe copy that file to another directory, so you can access it after any reboot. If there's anything useful in those logs, there is probably somebody at this forum who knows how to interpret it.

[fitlad]

That's probably the best idea. If haldaemon fails or doesn't start, then post anything related to it from boot.omsg. Maybe copy that file to another directory, so you can access it after any reboot. If there's anything useful in those logs, there is probably somebody at this forum who knows how to interpret it.

nrickert I followed your advice, I made a copy of my /var/log/boot.omsg when that haldaemon bug occurred during boot time, please find it attached below

klogd 1.4.1, log source = ksyslog started.
<5>[    0.000000] Linux version 2.6.34.7-0.7-desktop (geeko@buildhost) (gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux) ) #1 SMP PREEMPT 2010-12-13 11:13:53 +0100
<6>[    0.000000] BIOS-provided physical RAM map:
<6>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
<6>[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
<6>[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f690000 (usable)
<6>[    0.000000]  BIOS-e820: 000000007f690000 - 000000007f69e400 (ACPI data)
<6>[    0.000000]  BIOS-e820: 000000007f69e400 - 000000007f6e0000 (ACPI NVS)
<6>[    0.000000]  BIOS-e820: 000000007f6e0000 - 000000007f700000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] DMI 2.5 present.
<5>[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
<7>[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
<7>[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
<7>[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
<6>[    0.000000] last_pfn = 0x7f690 max_arch_pfn = 0x1000000
<7>[    0.000000] MTRR default type: uncachable
<7>[    0.000000] MTRR fixed ranges enabled:
<7>[    0.000000]   00000-9FFFF write-back
<7>[    0.000000]   A0000-BFFFF uncachable
<7>[    0.000000]   C0000-CFFFF write-protect
<7>[    0.000000]   D0000-DFFFF uncachable
<7>[    0.000000]   E0000-EFFFF write-through
<7>[    0.000000]   F0000-FFFFF write-protect
<7>[    0.000000] MTRR variable ranges enabled:
<7>[    0.000000]   0 base 000000000 mask 080000000 write-back
<7>[    0.000000]   1 base 07F700000 mask 0FFF00000 uncachable
<7>[    0.000000]   2 base 07F800000 mask 0FF800000 uncachable
<7>[    0.000000]   3 disabled
<7>[    0.000000]   4 disabled
<7>[    0.000000]   5 disabled
<7>[    0.000000]   6 disabled
<7>[    0.000000]   7 disabled
<6>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<6>[    0.000000] Scanning 0 areas for low memory corruption
<6>[    0.000000] modified physical RAM map:
<6>[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
<6>[    0.000000]  modified: 0000000000010000 - 000000000009ec00 (usable)
<6>[    0.000000]  modified: 000000000009ec00 - 00000000000a0000 (reserved)
<6>[    0.000000]  modified: 00000000000e2000 - 0000000000100000 (reserved)
<6>[    0.000000]  modified: 0000000000100000 - 000000007f690000 (usable)
<6>[    0.000000]  modified: 000000007f690000 - 000000007f69e400 (ACPI data)
<6>[    0.000000]  modified: 000000007f69e400 - 000000007f6e0000 (ACPI NVS)
<6>[    0.000000]  modified: 000000007f6e0000 - 000000007f700000 (reserved)
<6>[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
<6>[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
<7>[    0.000000] initial memory mapped : 0 - 01000000
<6>[    0.000000] found SMP MP-table at [c00ff780] ff780
<6>[    0.000000] init_memory_mapping: 0000000000000000-00000000371fe000
<7>[    0.000000]  0000000000 - 0000200000 page 4k
<7>[    0.000000]  0000200000 - 0037000000 page 2M
<7>[    0.000000]  0037000000 - 00371fe000 page 4k
<7>[    0.000000] kernel direct mapping tables up to 371fe000 @ 15000-1f000
<6>[    0.000000] RAMDISK: 377e2000 - 37ff0000
<6>[    0.000000] Allocated new RAMDISK: 00afc000 - 01309f9f
<6>[    0.000000] Move RAMDISK from 00000000377e2000 - 0000000037feff9e to 00afc000 - 01309f9e
<4>[    0.000000] ACPI: RSDP 000f98b0 00024 (v02 ACPIAM)
<4>[    0.000000] ACPI: XSDT 7f690100 0008C (v01 LGE    LGPC     20100317 MSFT 00000097)
<4>[    0.000000] ACPI: FACP 7f690290 000F4 (v03 031710 FACP1025 20100317 MSFT 00000097)
<4>[    0.000000] ACPI: DSDT 7f690680 0B374 (v01  H00JL H00JL000 00000000 INTL 20051117)
<4>[    0.000000] ACPI: FACS 7f69e400 00040
<4>[    0.000000] ACPI: APIC 7f690390 0005C (v01 031710 APIC1025 20100317 MSFT 00000097)
<4>[    0.000000] ACPI: MCFG 7f690430 0003C (v01 031710 OEMMCFG  20100317 MSFT 00000097)
<4>[    0.000000] ACPI: SLIC 7f690470 00176 (v01 LGE    LGPC     20100317 MSFT 00000097)
<4>[    0.000000] ACPI: ECDT 7f690620 00054 (v01 031710 OEMECDT  20100317 MSFT 00000097)
<4>[    0.000000] ACPI: DBGP 7f6903f0 00034 (v01 031710 DBGP1025 20100317 MSFT 00000097)
<4>[    0.000000] ACPI: BOOT 7f6905f0 00028 (v01 031710 BOOT1025 20100317 MSFT 00000097)
<4>[    0.000000] ACPI: OEMB 7f69e440 00072 (v01 031710 OEMB1025 20100317 MSFT 00000097)
<4>[    0.000000] ACPI: HPET 7f69ba00 00038 (v01 031710 OEMHPET  20100317 MSFT 00000097)
<4>[    0.000000] ACPI: GSCI 7f69e4c0 02024 (v01 031710 GMCHSCI  20100317 MSFT 00000097)
<4>[    0.000000] ACPI: ATKG 7f6a06f0 08024 (v01 072809  OEMATKG 20090728 MSFT 00000097)
<4>[    0.000000] ACPI: SSDT 7f6a9080 004F0 (v01  PmRef    CpuPm 00003000 INTL 20051117)
<4>[    0.000000] ACPI: SSDT 7f6a9570 020ED (v01 LGE    wmi_acpi 00001000 INTL 20051117)
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<7>[    0.000000] could not find any ACPI SRAT memory areas.
<7>[    0.000000] failed to get NUMA memory information from SRAT table
<7>[    0.000000] NUMA - single node, flat memory mode
<6>[    0.000000] Node: 0, start_pfn: 0, end_pfn: 7f690
<7>[    0.000000]   Setting physnode_map array to node 0 for pfns:
<7>[    0.000000]   0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 
<7>[    0.000000] node 0 pfn: [0 - 7f690]
<7>[    0.000000] Reserving 4096 pages of KVA for lmem_map of node 0 at 7e600
<7>[    0.000000] remove_active_range (0, 517632, 521728)
<6>[    0.000000] Reserving total of 1000 pages for numa KVA remap
<6>[    0.000000] kva_start_pfn ~ 36000 max_low_pfn ~ 371fe
<6>[    0.000000] max_pfn = 7f690
<5>[    0.000000] 1156MB HIGHMEM available.
<5>[    0.000000] 881MB LOWMEM available.
<7>[    0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
<7>[    0.000000] Low memory ends at vaddr f71fe000
<7>[    0.000000] node 0 will remap to vaddr f6000000 - f7000000
<7>[    0.000000] allocate_pgdat: node 0 NODE_DATA f6000000
<7>[    0.000000] remap_numa_kva: node 0
<7>[    0.000000] remap_numa_kva: f6000000 to pfn 0007e600
<7>[    0.000000] remap_numa_kva: f6200000 to pfn 0007e800
<7>[    0.000000] remap_numa_kva: f6400000 to pfn 0007ea00
<7>[    0.000000] remap_numa_kva: f6600000 to pfn 0007ec00
<7>[    0.000000] remap_numa_kva: f6800000 to pfn 0007ee00
<7>[    0.000000] remap_numa_kva: f6a00000 to pfn 0007f000
<7>[    0.000000] remap_numa_kva: f6c00000 to pfn 0007f200
<7>[    0.000000] remap_numa_kva: f6e00000 to pfn 0007f400
<7>[    0.000000] High memory starts at vaddr f71fe000
<6>[    0.000000]   mapped low ram: 0 - 371fe000
<6>[    0.000000]   low ram: 0 - 371fe000
<4>[    0.000000] Zone PFN ranges:
<4>[    0.000000]   DMA      0x00000010 -> 0x00001000
<4>[    0.000000]   Normal   0x00001000 -> 0x000371fe
<4>[    0.000000]   HighMem  0x000371fe -> 0x0007f690
<4>[    0.000000] Movable zone start PFN for each node
<4>[    0.000000] early_node_map[3] active PFN ranges
<4>[    0.000000]     0: 0x00000010 -> 0x0000009e
<4>[    0.000000]     0: 0x00000100 -> 0x0007e600
<4>[    0.000000]     0: 0x0007f600 -> 0x0007f690
<7>[    0.000000] On node 0 totalpages: 517662
<7>[    0.000000] free_area_init_node: node 0, pgdat f6000000, node_mem_map f6002200
<7>[    0.000000]   DMA zone: 32 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 3950 pages, LIFO batch:0
<7>[    0.000000]   Normal zone: 1732 pages used for memmap
<7>[    0.000000]   Normal zone: 219962 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 2314 pages used for memmap
<7>[    0.000000]   HighMem zone: 289672 pages, LIFO batch:31
<6>[    0.000000] Using APIC driver default
<6>[    0.000000] ACPI: PM-Timer IO Port: 0x808
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<6>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<6>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>[    0.000000] ACPI: IRQ0 used by override.
<7>[    0.000000] ACPI: IRQ2 used by override.
<7>[    0.000000] ACPI: IRQ9 used by override.
<6>[    0.000000] Using ACPI (MADT) for SMP configuration information
<6>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
<6>[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
<7>[    0.000000] nr_irqs_gsi: 24
<7>[    0.000000] early_res array is doubled to 64 at [1c000 - 1c7ff]
<6>[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
<6>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
<6>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
<6>[    0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
<6>[    0.000000] Allocating PCI resources starting at 7f700000 (gap: 7f700000:7f700000)
<6>[    0.000000] Booting paravirtualized kernel on bare hardware
<6>[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:8
<6>[    0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s34900 r0 d22444 u1048576
<6>[    0.000000] pcpu-alloc: s34900 r0 d22444 u1048576 alloc=1*2097152
<6>[    0.000000] pcpu-alloc: [0] 0 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 513584
<4>[    0.000000] Policy zone: HighMem
<5>[    0.000000] Kernel command line: root=/dev/disk/by-id/ata-FUJITSU_MJA2250BH_G2_K93STA329VRV-part2 resume=/dev/disk/by-id/ata-FUJITSU_MJA2250BH_G2_K93STA329VRV-part1 splash=silent quiet showopts vga=0x317
<6>[    0.000000] bootsplash: silent mode.
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Enabling fast FPU save and restore... done.
<6>[    0.000000] Enabling unmasked SIMD FPU exception support... done.
<6>[    0.000000] Initializing CPU#0
<6>[    0.000000] Subtract (48 early reservations)
<6>[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
<6>[    0.000000]   #2 [0000200000 - 0000af2f64]   TEXT DATA BSS
<6>[    0.000000]   #3 [0000af3000 - 0000afb21c]             BRK
<6>[    0.000000]   #4 [00000ff790 - 0000100000]   BIOS reserved
<6>[    0.000000]   #5 [00000ff780 - 00000ff790]    MP-table mpf
<6>[    0.000000]   #6 [000009ec00 - 00000fdcd0]   BIOS reserved
<6>[    0.000000]   #7 [00000fde20 - 00000ff780]   BIOS reserved
<6>[    0.000000]   #8 [00000fdcd0 - 00000fde20]    MP-table mpc
<6>[    0.000000]   #9 [0000010000 - 0000011000]      TRAMPOLINE
<6>[    0.000000]   #10 [0000011000 - 0000015000]     ACPI WAKEUP
<6>[    0.000000]   #11 [0000015000 - 000001c000]         PGTABLE
<6>[    0.000000]   #12 [0000afc000 - 000130a000]     NEW RAMDISK
<6>[    0.000000]   #13 [007e600000 - 007f600000]         KVA RAM
<6>[    0.000000]   #14 [0036000000 - 0037000000]          KVA PG
<6>[    0.000000]   #15 [000130a000 - 000130b000]         BOOTMEM
<6>[    0.000000]   #16 [000130b000 - 000130b004]         BOOTMEM
<6>[    0.000000]   #17 [000130b040 - 000130b100]         BOOTMEM
<6>[    0.000000]   #18 [000130b100 - 000130b1a4]         BOOTMEM
<6>[    0.000000]   #19 [000130b1c0 - 000130e1c0]         BOOTMEM
<6>[    0.000000]   #20 [000130e1c0 - 000130e29c]         BOOTMEM
<6>[    0.000000]   #21 [000130e2c0 - 00013142c0]         BOOTMEM
<6>[    0.000000]   #22 [00013142c0 - 00013142ed]         BOOTMEM
<6>[    0.000000]   #23 [0001314300 - 000131432f]         BOOTMEM
<6>[    0.000000]   #24 [0001314340 - 00013144a8]         BOOTMEM
<6>[    0.000000]   #25 [00013144c0 - 0001314500]         BOOTMEM
<6>[    0.000000]   #26 [0001314500 - 0001314540]         BOOTMEM
<6>[    0.000000]   #27 [0001314540 - 0001314580]         BOOTMEM
<6>[    0.000000]   #28 [0001314580 - 00013145c0]         BOOTMEM
<6>[    0.000000]   #29 [00013145c0 - 0001314600]         BOOTMEM
<6>[    0.000000]   #30 [0001314600 - 0001314640]         BOOTMEM
<6>[    0.000000]   #31 [0001314640 - 0001314680]         BOOTMEM
<6>[    0.000000]   #32 [0001314680 - 00013146c0]         BOOTMEM
<6>[    0.000000]   #33 [00013146c0 - 0001314700]         BOOTMEM
<6>[    0.000000]   #34 [0001314700 - 0001314710]         BOOTMEM
<6>[    0.000000]   #35 [0001314740 - 00013147eb]         BOOTMEM
<6>[    0.000000]   #36 [0001314800 - 00013148ab]         BOOTMEM
<6>[    0.000000]   #37 [0001400000 - 000140e000]         BOOTMEM
<6>[    0.000000]   #38 [0001500000 - 000150e000]         BOOTMEM
<6>[    0.000000]   #39 [00013168c0 - 00013168c4]         BOOTMEM
<6>[    0.000000]   #40 [0001316900 - 0001316904]         BOOTMEM
<6>[    0.000000]   #41 [0001316940 - 0001316948]         BOOTMEM
<6>[    0.000000]   #42 [0001316980 - 0001316988]         BOOTMEM
<6>[    0.000000]   #43 [00013169c0 - 0001316a60]         BOOTMEM
<6>[    0.000000]   #44 [0001316a80 - 0001316ac8]         BOOTMEM
<6>[    0.000000]   #45 [0001316b00 - 000131ab00]         BOOTMEM
<6>[    0.000000]   #46 [000131ab00 - 000139ab00]         BOOTMEM
<6>[    0.000000]   #47 [000139ab00 - 00013dab00]         BOOTMEM
<6>[    0.000000] Initializing HighMem for node 0 (000371fe:0007f690)
<6>[    0.000000] Memory: 2035824k/2087488k available (4443k kernel code, 34824k reserved, 3275k data, 424k init, 1167944k highmem)

to be continued

[fitlad]

<6>[    0.000000] virtual kernel memory layout:
<6>[    0.000000]     fixmap  : 0xff5b4000 - 0xfffff000   (10540 kB)
<6>[    0.000000]     pkmap   : 0xff200000 - 0xff400000   (2048 kB)
<6>[    0.000000]     vmalloc : 0xf79fe000 - 0xff1fe000   ( 120 MB)
<6>[    0.000000]     lowmem  : 0xc0000000 - 0xf71fe000   ( 881 MB)
<6>[    0.000000]       .init : 0xc098a000 - 0xc09f4000   ( 424 kB)
<6>[    0.000000]       .data : 0xc0656fc0 - 0xc0989ca8   (3275 kB)
<6>[    0.000000]       .text : 0xc0200000 - 0xc0656fc0   (4443 kB)
<6>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:8448 nr_irqs:424
<6>[    0.000000] Extended CMOS year: 2000
<4>[    0.000000] Console: colour dummy device 80x25
<6>[    0.000000] console [tty0] enabled
<7>[    0.000000] hpet clockevent registered
<4>[    0.000000] Fast TSC calibration using PIT
<4>[    0.000000] Detected 1662.425 MHz processor.
<6>[    0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.85 BogoMIPS (lpj=1662425)
<4>[    0.001121] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
<6>[    0.001279] Security Framework initialized
<6>[    0.001306] AppArmor: AppArmor initialized
<4>[    0.002014] Mount-cache hash table entries: 512
<6>[    0.002254] CPU: Physical Processor ID: 0
<6>[    0.002258] CPU: Processor Core ID: 0
<6>[    0.002264] mce: CPU supports 5 MCE banks
<7>[    0.002273] CPU0: Thermal monitoring handled by SMI
<6>[    0.002279] using mwait in idle threads.
<6>[    0.002291] Performance Events: Atom events, Intel PMU driver.
<6>[    0.002300] ... version:                3
<6>[    0.002303] ... bit width:              40
<6>[    0.002307] ... generic registers:      2
<6>[    0.002310] ... value mask:             000000ffffffffff
<6>[    0.002314] ... max period:             000000007fffffff
<6>[    0.002318] ... fixed-purpose events:   3
<6>[    0.002321] ... event mask:             0000000700000003
<6>[    0.002332] Checking 'hlt' instruction... OK.
<6>[    0.006583] Unpacking initramfs...
<6>[    0.334921] Freeing initrd memory: 8248k freed
<6>[    0.340971] ACPI: Core revision 20100121
<6>[    0.384111] Enabling APIC mode:  Flat.  Using 1 I/O APICs
<6>[    0.384327] Mapping cpu 0 to node 0
<6>[    0.384528] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[    0.395029] CPU0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz stepping 0a
<4>[    0.395999] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
<6>[    0.395999] APIC delta adjusted to PM-Timer: 1039098 (1246901)
<6>[    0.401050] Booting Node   0, Processors  #1 Ok.
<6>[    0.001999] Initializing CPU#1
<6>[    0.001999] Mapping cpu 1 to node 0
<7>[    0.001999] CPU1: Thermal monitoring handled by SMI
<6>[    0.473032] Brought up 2 CPUs
<6>[    0.473032] Total of 2 processors activated (6649.67 BogoMIPS).
<6>[    0.475097] devtmpfs: initialized
<6>[    0.475362] regulator: core version 0.5
<6>[    0.475362] regulator: dummy: 
<4>[    0.475362] Time: 19:43:11  Date: 02/23/11
<6>[    0.475362] NET: Registered protocol family 16
<6>[    0.476303] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
<6>[    0.476310] ACPI: bus type pci registered
<6>[    0.476450] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
<6>[    0.476457] PCI: not using MMCONFIG
<6>[    0.476716] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
<6>[    0.476720] PCI: Using configuration type 1 for base access
<4>[    0.481243] bio: create slab <bio-0> at 0
<6>[    0.488488] ACPI: EC: EC description table is found, configuring boot EC
<4>[    0.501540] ACPI: Executed 1 blocks of module-level executable AML code
<4>[    0.517359] ACPI: SSDT 7f6a87f0 00202 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
<4>[    0.519880] ACPI: SSDT 7f6a8a90 005E3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
<4>[    0.522244] ACPI: SSDT 7f6a8720 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
<4>[    0.523914] ACPI: SSDT 7f6a8a00 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
<6>[    0.525397] ACPI: Interpreter enabled
<6>[    0.525406] ACPI: (supports S0 S3 S4 S5)
<6>[    0.525472] ACPI: Using IOAPIC for interrupt routing
<6>[    0.525607] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
<6>[    0.529156] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
<6>[    0.529163] PCI: Using MMCONFIG for extended config space
<6>[    0.555581] ACPI: EC: GPE = 0x1f, I/O: command/status = 0x66, data = 0x62
<6>[    0.557154] ACPI: No dock devices found.
<6>[    0.557163] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[    0.558187] ACPI: PCI Root Bridge [PCI0] (0000:00)
<6>[    0.559128] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
<6>[    0.559136] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
<6>[    0.559143] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
<6>[    0.559150] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
<6>[    0.559156] pci_root PNP0A08:00: host bridge window [mem 0x7f700000-0xfed8ffff]
<7>[    0.559241] pci 0000:00:02.0: reg 10: [mem 0xfe880000-0xfe8fffff]
<7>[    0.559249] pci 0000:00:02.0: reg 14: [io  0xbc00-0xbc07]
<7>[    0.559257] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
<7>[    0.559265] pci 0000:00:02.0: reg 1c: [mem 0xfe900000-0xfe9fffff]
<7>[    0.559311] pci 0000:00:02.1: reg 10: [mem 0xfdf00000-0xfdf7ffff]
<7>[    0.559430] pci 0000:00:1b.0: reg 10: [mem 0xfe878000-0xfe87bfff 64bit]
<7>[    0.559502] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
<7>[    0.559510] pci 0000:00:1b.0: PME# disabled
<7>[    0.559632] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<7>[    0.559640] pci 0000:00:1c.0: PME# disabled
<7>[    0.559761] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
<7>[    0.559768] pci 0000:00:1c.1: PME# disabled
<7>[    0.559890] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
<7>[    0.559898] pci 0000:00:1c.2: PME# disabled
<7>[    0.560028] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
<7>[    0.560037] pci 0000:00:1c.3: PME# disabled
<7>[    0.560117] pci 0000:00:1d.0: reg 20: [io  0xb880-0xb89f]
<7>[    0.560192] pci 0000:00:1d.1: reg 20: [io  0xb800-0xb81f]
<7>[    0.560270] pci 0000:00:1d.2: reg 20: [io  0xb480-0xb49f]
<7>[    0.560345] pci 0000:00:1d.3: reg 20: [io  0xb400-0xb41f]
<7>[    0.560420] pci 0000:00:1d.7: reg 10: [mem 0xfe877c00-0xfe877fff]
<7>[    0.560491] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
<7>[    0.560498] pci 0000:00:1d.7: PME# disabled
<7>[    0.560737] pci 0000:00:1f.2: reg 10: [io  0xa800-0xa807]
<7>[    0.560748] pci 0000:00:1f.2: reg 14: [io  0xb080-0xb083]
<7>[    0.560759] pci 0000:00:1f.2: reg 18: [io  0xb000-0xb007]
<7>[    0.560770] pci 0000:00:1f.2: reg 1c: [io  0xac00-0xac03]
<7>[    0.560781] pci 0000:00:1f.2: reg 20: [io  0xa880-0xa89f]
<7>[    0.560793] pci 0000:00:1f.2: reg 24: [mem 0xfe877800-0xfe877bff]
<7>[    0.560843] pci 0000:00:1f.2: PME# supported from D3hot
<7>[    0.560850] pci 0000:00:1f.2: PME# disabled
<6>[    0.560945] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
<7>[    0.560954] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
<7>[    0.560963] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
<7>[    0.560975] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<7>[    0.561101] pci 0000:02:00.0: reg 10: [io  0xc800-0xc8ff]
<7>[    0.561116] pci 0000:02:00.0: reg 14: [mem 0xfeafc000-0xfeafffff]
<7>[    0.561210] pci 0000:02:00.0: supports D1 D2
<7>[    0.561215] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
<7>[    0.561224] pci 0000:02:00.0: PME# disabled
<6>[    0.561261] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
<7>[    0.561269] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
<7>[    0.561278] pci 0000:00:1c.1:   bridge window [mem 0xfea00000-0xfeafffff]
<7>[    0.561290] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<7>[    0.561416] pci 0000:03:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
<7>[    0.561430] pci 0000:03:00.0: reg 18: [io  0xdc00-0xdc7f]
<7>[    0.561521] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.561530] pci 0000:03:00.0: PME# disabled
<6>[    0.561566] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
<7>[    0.561574] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
<7>[    0.561583] pci 0000:00:1c.2:   bridge window [mem 0xfeb00000-0xfebfffff]
<7>[    0.561595] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<6>[    0.561667] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
<7>[    0.561675] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
<7>[    0.561683] pci 0000:00:1c.3:   bridge window [mem 0xfe000000-0xfe7fffff]
<7>[    0.561695] pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
<6>[    0.561786] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
<7>[    0.561794] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
<7>[    0.561803] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
<7>[    0.561814] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<7>[    0.561821] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
<7>[    0.561827] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
<7>[    0.561834] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
<7>[    0.561841] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
<7>[    0.561848] pci 0000:00:1e.0:   bridge window [mem 0x7f700000-0xfed8ffff] (subtractive decode)
<7>[    0.561897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>[    0.562378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
<7>[    0.562542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
<7>[    0.562703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
<6>[    0.597033] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
<6>[    0.597354] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
<6>[    0.597664] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
<6>[    0.597974] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
<6>[    0.598294] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
<6>[    0.598600] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 12)
<6>[    0.598912] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
<6>[    0.599237] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 12)
<5>[    0.599794] SCSI subsystem initialized
<7>[    0.601020] libata version 3.00 loaded.
<6>[    0.601155] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
<6>[    0.601178] vgaarb: loaded
<6>[    0.601260] usbcore: registered new interface driver usbfs
<6>[    0.601302] usbcore: registered new interface driver hub
<6>[    0.601318] usbcore: registered new device driver usb
<6>[    0.601318] PCI: Using ACPI for IRQ routing
<7>[    0.601318] PCI: pci_cache_line_size set to 64 bytes
<7>[    0.601318] reserve RAM buffer: 000000000009ec00 - 000000000009ffff 
<7>[    0.601318] reserve RAM buffer: 000000007f690000 - 000000007fffffff 
<6>[    0.602009] NetLabel: Initializing
<6>[    0.602009] NetLabel:  domain hash size = 128
<6>[    0.602009] NetLabel:  protocols = UNLABELED CIPSOv4
<6>[    0.602022] NetLabel:  unlabeled traffic allowed by default
<6>[    0.602033] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
<6>[    0.602044] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
<6>[    0.602054] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
<6>[    0.605037] Switching to clocksource tsc
<6>[    0.609956] AppArmor: AppArmor Filesystem Enabled
<6>[    0.610000] pnp: PnP ACPI init
<6>[    0.610029] ACPI: bus type pnp registered
<6>[    0.615684] pnp: PnP ACPI: found 13 devices
<6>[    0.615690] ACPI: ACPI bus type pnp unregistered

to be continued