Unable to open initial device, quitting

[bkv1]

Hi

I have an HP Officejet Pro 8500 on my lan. When printing from Suse all that comes out on paper is this: "Unable to open initial device. Quitting."
Output from hp-check is pasted below. Has anyone here experienced the same? I tried to paste the output from hp-check into the message, but the forum did not accept that.

Regards, Bjorn

[robin_listas]

On 2011-10-29 16:26, bkv1 wrote:

> I tried to paste the output from hp-check into the message, but
> the forum did not accept that.

Try as code - advanced editor, #. Or use our pastebin.

--
Cheers / Saludos,

Carlos E. R.
(from 11.4 x86_64 "Celadon" at Telcontar)

[bkv1]

Here is the output of the hp-check

hp-check[31329]: info: :
Initializing. Please wait...
SUSE LINUX

11.4

scheduler is running

1.4.6

Linux linux-oxsa.site 2.6.37.6-0.7-desktop #1 SMP PREEMPT 2011-07-21 02:17:24 +0200 i686 i686 i386 GNU/Linux

hp-check[31329]: info: :
hp-check[31329]: info: :---------------
hp-check[31329]: info: :| SYSTEM INFO |
hp-check[31329]: info: :---------------
hp-check[31329]: info: :
hp-check[31329]: info: :Basic system information:
hp-check[31329]: info: :Linux linux-oxsa.site 2.6.37.6-0.7-desktop #1 SMP PREEMPT 2011-07-21 02:17:24 +0200 i686 i686 i386 GNU/Linux
hp-check[31329]: info: :
hp-check[31329]: info: :Distribution:
hp-check[31329]: info: :suse 11.4
hp-check[31329]: info: :
hp-check[31329]: info: :Checking Python version...
hp-check[31329]: info: :OK, version 2.7.0 installed
hp-check[31329]: info: :
hp-check[31329]: info: :Checking PyQt 4.x version...
hp-check[31329]: info: :OK, version 4.8.3 installed.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for CUPS...
hp-check[31329]: info: :Status: scheduler is running
hp-check[31329]: info: :Version: 1.4.6
hp-check[31329]: info: :error_log is set to level: warn
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dbus/python-dbus...
hp-check[31329]: info: :dbus daemon is running.
hp-check[31329]: info: :python-dbus version: 0.83.2
hp-check[31329]: info: :
hp-check[31329]: info: :
hp-check[31329]: info: :------------------------------------
hp-check[31329]: info: :| COMPILE AND RUNTIME DEPENDENCIES |
hp-check[31329]: info: :------------------------------------
hp-check[31329]: info: :
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: CUPS - Common Unix Printing System...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: CUPS devel- Common Unix Printing System development files...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: CUPS image - CUPS image development files...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: DBus - Message bus system...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: gcc - GNU Project C and C++ Compiler...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: libcrypto - OpenSSL cryptographic library...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: libjpeg - JPEG library...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: libpthread - POSIX threads library...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: libtool - Library building support services...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: libusb - USB library...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: make - GNU make utility to maintain groups of programs...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: PolicyKit - Administrative policy framework...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: Python DBus - Python bindings for DBus...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: Python devel - Python development files...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: Python XML libraries...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: Python 2.3 or greater - Required for fax functionality...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: Python 2.2 or greater - Python programming language...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: Reportlab - PDF library for Python...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: SANE - Scanning library...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: SANE - Scanning library development files...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: scanimage - Shell scanning program...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking for dependency: xsane - Graphical scanner frontend for SANE...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :
hp-check[31329]: info: :----------------------
hp-check[31329]: info: :| HPLIP INSTALLATION |
hp-check[31329]: info: :----------------------
hp-check[31329]: info: :
hp-check[31329]: info: :
hp-check[31329]: info: :Currently installed HPLIP version...
hp-check[31329]: info: :HPLIP 3.11.5 currently installed in '/usr/share/hplip'.
hp-check[31329]: info: :
hp-check[31329]: info: :Current contents of '/etc/hp/hplip.conf' file:
hp-check[31329]: info: :# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.11.5

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/cups/model/manufacturer-PPDs/hplip
ppdbase=/usr/share/cups/model/manufacturer-PPDs
doc=/usr/share/doc/packages/hplip
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/lib/cups/driver

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=yes
foomatic-rip-hplip-install=yes
hpcups-install=yes
cups-drv-install=no
cups-ppd-install=yes
internal-tag=3.11.5
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no

hp-check[31329]: info: :
hp-check[31329]: info: :Current contents of '/var/lib/hp/hplip.state' file:
hp-check[31329]: info: :# hplip.state - HPLIP runtime persistent variables. 

[plugin]
installed=0
eula=0


hp-check[31329]: info: :
hp-check[31329]: info: :Current contents of '~/.hplip/hplip.conf' file:
hp-check[31329]: info: :[settings]
systray_visible = 0
systray_messages = 0

[last_used]
device_uri = "hp:/net/Officejet_Pro_8500_A910?zc=HPOccam"
printer_name = Officejet_Pro_8500_A910
working_dir = .

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list = 

[fax]
voice_phone = 
email_address = 

[installation]
date_time = 29. okt. 2011 22:14:33
version = 3.11.5


hp-check[31329]: info: :
hp-check[31329]: info: :--------------------------
hp-check[31329]: info: :| DISCOVERED USB DEVICES |
hp-check[31329]: info: :--------------------------
hp-check[31329]: info: :
hp-check[31329]: info: :No devices found.
hp-check[31329]: info: :
hp-check[31329]: info: :---------------------------------
hp-check[31329]: info: :| INSTALLED CUPS PRINTER QUEUES |
hp-check[31329]: info: :---------------------------------
hp-check[31329]: info: :
hp-check[31329]: info: :
hp-check[31329]: info: :Officejet_Pro_8500_A910
hp-check[31329]: info: :-----------------------
hp-check[31329]: info: :Type: Printer
hp-check[31329]: info: :Device URI: hp:/net/Officejet_Pro_8500_A910?zc=HPOccam
hp-check[31329]: info: :PPD: /etc/cups/ppd/Officejet_Pro_8500_A910.ppd
hp-check[31329]: info: :PPD Description: HP Officejet Pro 8500 a910 hpijs, 3.11.5
hp-check[31329]: info: :Printer status: printer Officejet_Pro_8500_A910 is idle.  enabled since fr. 28. okt. 2011 kl. 20.36 +0200
hp-check[31329]: info: :Communication status: Good
hp-check[31329]: info: :
hp-check[31329]: info: :
hp-check[31329]: info: :----------------------
hp-check[31329]: info: :| SANE CONFIGURATION |
hp-check[31329]: info: :----------------------
hp-check[31329]: info: :
hp-check[31329]: info: :'hpaio' in '/etc/sane.d/dll.conf'...
hp-check[31329]: info: :OK, found. SANE backend 'hpaio' is properly set up.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking output of 'scanimage -L'...
hp-check[31329]: info: :
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

hp-check[31329]: info: :
hp-check[31329]: info: :---------------------
hp-check[31329]: info: :| PYTHON EXTENSIONS |
hp-check[31329]: info: :---------------------
hp-check[31329]: info: :
hp-check[31329]: info: :Checking 'cupsext' CUPS extension...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking 'pcardext' Photocard extension...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking 'hpmudext' I/O extension...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :Checking 'scanext' SANE scanning extension...
hp-check[31329]: info: :OK, found.
hp-check[31329]: info: :
hp-check[31329]: info: :
hp-check[31329]: info: :
hp-check[31329]: info: :---------------
hp-check[31329]: info: :| USER GROUPS |
hp-check[31329]: info: :---------------
hp-check[31329]: info: :
hp-check[31329]: info: :users lp video

hp-check[31329]: info: :
hp-check[31329]: info: :-----------
hp-check[31329]: info: :| SUMMARY |
hp-check[31329]: info: :-----------
hp-check[31329]: info: :
error: 1 error or warning.
hp-check[31329]: info: :
hp-check[31329]: info: :Please refer to the installation instructions at:
hp-check[31329]: info: :http://hplip.sourceforge.net/install/index.html

hp-check[31329]: info: :
hp-check[31329]: info: :Done.

[deano_ferrari]

That's a ghostscript error. It might also be useful to look at /var/log/cups/access_log and error_log. It is probably related to the configured driver. When you installed, did you do so via 'hp-setup'?

I'd also like to know if 'hp-testpage' prints successfully....

[bkv1]

That's a ghostscript error. It might also be useful to look at /var/log/cups/access_log and error_log. It is probably related to the configured driver. When you installed, did you do so via 'hp-setup'?

I'd also like to know if 'hp-testpage' prints successfully....

Hi

I installed hplip with yast. hp-testpage has the same problem. After i ran hp-testpage the lines below appeared in access log. Nothing in error.log



localhost - - [30/Oct/2011:18:09:05 +0100] "POST /printers/Officejet_Pro_8500_A910 HTTP/1.1" 200 392 Create-Job successful-ok
localhost - - [30/Oct/2011:18:09:05 +0100] "POST /printers/Officejet_Pro_8500_A910 HTTP/1.1" 200 423157 Send-Document successful-ok

[deano_ferrari]

Can you answer my question about how you first configured your printer. (YaST, hp-setup, or CUPS web interface)? It may be the incorrect driver is used.

HP Linux Imaging and Printing

[deano_ferrari]

I also note that the HP Linux page mentions the HP Officejet Pro 8500 requires

Minimum HPLIP version 3.9.2

while you have the following version reported via hp-check

[hplip]
version=3.11.5

Maybe that is your issue?

[robin_listas]

On 2011-10-30 20:26, deano ferrari wrote:

>> Minimum HPLIP version 3.9.2

> version=3.11.5

> Maybe that is your issue?

He has more than the minimum. 11>9

--
Cheers / Saludos,

Carlos E. R.
(from 11.4 x86_64 "Celadon" at Telcontar)

[bkv1]

Can you answer my question about how you first configured your printer. (YaST, hp-setup, or CUPS web interface)? It may be the incorrect driver is used.

HP Linux Imaging and Printing

I did it first in yast, but I have done it over again, maybe also in hp-setup. Can't exactly remember. Should I delete the printer definition and configure the printer again?

[deano_ferrari]

@carlos: True, too early in the morning for me.

I did it first in yast, but I have done it over again, maybe also in hp-setup. Can't exactly remember. Should I delete the printer definition and configure the printer again?

I would.