openSUSE Forums > Archives > SLS Archives > ARCHIVES - SuSE Linux > ARCHIVES - OpenBeta Questions » Issue When Trying To Update Smart

Go Back   openSUSE Forums > Archives > SLS Archives > ARCHIVES - SuSE Linux > ARCHIVES - OpenBeta Questions
Reload this Page Issue When Trying To Update Smart
Forums FAQ Members List Search Today's Posts Mark Forums Read


ARCHIVES - OpenBeta Questions Questions / Comments about the new openBeta from SuSE should be posted in here.

 
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 07-Oct-2007, 13:45
rax369
Guest
  
Posts: n/a
Thumbs up
This PC is running SLED 10.0, after following this instructions I tried to update my SMART version but changing the installation address to my Suse version. After trying several times I quit and I used YaST to discovering @ the end, the same update was offered there by a repository from Guru. So after uninstalling any previous version of SMART I proceeded to the update.

Now when I try to install 'smart --gui' the installation throws me this:
Code:
Britney:/etc # smart install smart-gui
Loading cache...
Updating cache...************** ######################################## [100%]

Computing transaction...

Installing packages (1):
**smart-gui-0.51-11.guru.suse100@i686

83.0kB of package files are needed. 313.7kB will be used.

Confirm changes? (Y/n): y

Committing transaction...
Preparing...********************######################################## [**0%]
** 1:Installing smart-gui****** ######################################## [100%]
Output from smart-gui-0.51-11.guru.suse100@i686:
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery

Traceback (most recent call last):
**File "/usr/bin/smart", line 194, in ?
****main(sys.argv[1:])
**File "/usr/bin/smart", line 167, in main
****exitcode = iface.run(opts.command, opts.argv)
**File "/usr/lib/python2.4/site-packages/smart/interface.py", line 53, in run
****result = _command.main(self._ctrl, opts)
**File "/usr/lib/python2.4/site-packages/smart/commands/install.py", line 178, in main
****ctrl.commitTransaction(trans, confirm=confirm)
**File "/usr/lib/python2.4/site-packages/smart/control.py", line 498, in commitTransaction
****return self.commitChangeSet(trans.getChangeSet(), caching, confirm)
**File "/usr/lib/python2.4/site-packages/smart/control.py", line 556, in commitChangeSet
****pmclass().commit(pmcs, pkgpaths)
**File "/usr/lib/python2.4/site-packages/smart/backends/rpm/pm.py", line 270, in commit
****probs = ts.run(cb, None)
**File "/usr/lib/python2.4/site-packages/smart/backends/rpm/pm.py", line 338, in __call__
****self._process_rpmout()
**File "/usr/lib/python2.4/site-packages/smart/backends/rpm/pm.py", line 323, in _process_rpmout
****output = self.rpmout.read()
**File "/usr/lib/python2.4/codecs.py", line 277, in read
****newchars, decodedbytes = self.decode(data, self.errors)
UnicodeDecodeError: 'utf8' codec can't decode byte 0xa8 in position 14539: unexpected code byte
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from db->close: DB_RUNRECOVERY: Fatal error, run database recovery
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30978) from dbenv->close: DB_RUNRECOVERY: Fatal error, run database recovery
Britney:/etc #
Could any1 help me to solve this issue please ?
  #2 (permalink)  
Old 07-Oct-2007, 13:51
deltaflyer
Guest
  
Posts: n/a
Default
in a console,as root run

rpm --rebuilddb

looks like the rpm database got corrupted. after running the command, try again installing

andy
  #3 (permalink)  
Old 07-Oct-2007, 14:38
rax369
Guest
  
Posts: n/a
Default
Wow! It worked !!!

Thanks a lot delta!
  #4 (permalink)  
Old 07-Oct-2007, 14:50
deltaflyer
Guest
  
Posts: n/a
Default
Excellent, glad you got it sorted, now enjoy

andy
  #5 (permalink)  
Old 07-Oct-2007, 14:52
Jonathan R
Guest
  
Posts: n/a
Default
Don't forget, before you install, update! Assuming you have channels.

#smart update
#smart install smart-gui
  #6 (permalink)  
Old 08-Oct-2007, 23:54
rax369
Guest
  
Posts: n/a
Default
Quote:
Don't forget, before you install, update! Assuming you have channels.

#smart update
#smart install smart-gui
[/b]
Thanks pal, that's exactly what I did, as suggested by Sergio1704 here

Greetings!
  #7 (permalink)  
Old 09-Oct-2007, 17:42
Sergio1704
Guest
  
Posts: n/a
Default
Quote:
Thanks pal, that's exactly what I did, as suggested by Sergio1704 here
[/b]
Yes, but Sergio1704 never said that his how-to had been tested on SLED 10
  #8 (permalink)  
Old 13-Oct-2007, 16:24
rax369
Guest
  
Posts: n/a
Default
Quote:
Yes, but Sergio1704 never said that his how-to had been tested on SLED 10
[/b]
lol... you R totally right. Well guess I took the risk in my desperation of making smart to work here. AND IT WORKED!

So if some of u guys are still using SLED 10 u R good to go! :lol:
 

Bookmarks

Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - openSUSE Forums - Archive - Privacy Statement - Top
© 2007 Novell, Inc. All Rights Reserved. This site uses the YAML CSS framework. All times are GMT -6. The time now is 09:13.
About openSUSE | Disclaimers | Feedback

Founded by Novell
 

Search Engine Friendly URLs by vBSEO 3.3.0 RC2