Xen Install Problem

Hi,
I have openSuSE 10.3 installed. I upgraded all the software and then proceded to install XEN. I used YAST and installed all the XEN RPMs. After the upgrade, the system was booted. After the XEN install, I booted and chose the XEN option. The boot failed. When I went into the messages, I found the following:

modprobe: FATAL: Could not load /lib/modules/2.6.22.5-31-default/modules.dep: No such file or directory

When I did an ls on /lib/modules, I found the following kernels:
2.6.22.17-0.1-default
2.6.22.17-0.1-xen

1. Why is the boot looking for an old kernel (2.6.22.5-31)?
2. How do I fix this?

TNX,
Walt

Hi,
I have openSuSE 10.3 installed. I upgraded all the software and then proceded to install XEN. I used YAST and installed all the XEN RPMs. After the upgrade, the system was booted. After the XEN install, I booted and chose the XEN option. The boot failed. When I went into the messages, I found the following:

modprobe: FATAL: Could not load /lib/modules/2.6.22.5-31-default/modules.dep: No such file or directory

When I did an ls on /lib/modules, I found the following kernels:
2.6.22.17-0.1-default
2.6.22.17-0.1-xen

1. Why is the boot looking for an old kernel (2.6.22.5-31)?
2. How do I fix this?

TNX,
Walt
[/b]

This is what is in /boot/grub/menu.lst

# Modified by YaST2. Last modification on Mon Apr 14 20:52:04 PDT 2008
default 1
timeout 8
gfxmenu (hd1,0)/boot/message

###Don't change this comment - YaST2 identifier: Original name: xen###
title XEN -- openSUSE 10.3 - 2.6.22.17-0.1
root (hd1,0)
kernel /boot/xen.gz
module /boot/vmlinuz-2.6.22.17-0.1-xen root=/dev/disk/by-id/scsi-SATA_IBM-DPTA-373420_JX0JXF05380-part1 vga=0x31a resume=/dev/sda1 splash=silent showopts
module /boot/initrd-2.6.22.17-0.1-xen

###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3 - 2.6.22.17-0.1
root (hd1,0)
kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/disk/by-id/scsi-SATA_IBM-DPTA-373420_JX0JXF05380-part1 vga=0x31a resume=/dev/sda1 splash=silent showopts
initrd /boot/initrd-2.6.22.17-0.1-default

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3 - 2.6.22.17-0.1
root (hd1,0)
kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/disk/by-id/scsi-SATA_IBM-DPTA-373420_JX0JXF05380-part1 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd /boot/initrd-2.6.22.17-0.1-default

###Don't change this comment - YaST2 identifier: Original name: SUSE LINUX 10.0 (/dev/sda2)###
title SUSE LINUX 10.0 (/dev/sda2)
rootnoverify (hd0,1)
chainloader +1

###Don't change this comment - YaST2 identifier: Original name: floppy###
title Floppy
rootnoverify (hd1,0)
chainloader (fd0)+1