|
||||||
| Forums FAQ | Members List | Search | Today's Posts | Mark Forums Read |
| ARCHIVES - Notebooks This is a special forum dedicated to notebook problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
My bluetooth is not working in suse linux ... (acer aspire 4710) it is working in win XP .. Can anone guide me from where to get started ?
Here is my laptop details given by Yast in Post support query Module..... Buttons: --laptop ##Y2support-/tmp/siga/siga.txt: 1. Hardware ------------------------------------------------------------------------------- 1.1 procinfo - /usr/bin/procinfo Linux 2.6.16.46-0.12-smp (geeko@buildhost) (gcc 4.1.2 20070115) #1 2CPU [linux.] Memory: Total Used Free Shared Buffers Mem: 1025716 992472 33244 0 30528 Swap: 4096532 0 4096532 Bootup: Wed Nov 21 21:41:01 2007 Load average: 0.74 0.61 0.45 1/186 5055 user : 0:01:07.78 5.1% page in : 756411 disk 1: 17487r 4687w nice : 0:00:45.99 3.5% page out: 70396 system: 0:00:20.70 1.5% page act: 39025 IOwait: 0:02:37.48 11.9% page dea: 2080 hw irq: 0:00:01.20 0.1% page flt: 1397506 sw irq: 0:00:02.58 0.2% swap in : 0 idle : 0:16:59.79 77.4% swap out: 0 uptime: 0:10:58.51 context : 649518 irq 0: 164529 timer irq 58: 267 HDA Intel irq 1: 10 i8042 irq 66: 1350 0 PCI-MSI e irq 8: 19 rtc irq169: 29925 uhci_hcd:usb2, ipw39 irq 9: 1480 acpi irq177: 108281 i915@pci:0000:00:02. irq 12: 133 i8042 irq185: 0 uhci_hcd:usb3 irq 14: 5726 ide0 irq225: 22904 libata, uhci_hcd:usb irq 50: 4098 uhci_hcd:usb1, ehci_ irq233: 3 ohci1394 ------------------------------------------------------------------------------- 1.2 cmdline - /proc/cmdline root=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2404SJDE6LKE-part7 vga=0x317 resume=/dev/sda6 splash=silent ------------------------------------------------------------------------------- 1.3 lsPCI - /sbin/lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) 0a:06.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 0a:06.2 Generic system peripheral [Class 0805]: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 0a:06.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) lspci - /sbin/lspci -vvv 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03) Subsystem: Acer Incorporated [ALI] Unknown device 012f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 Link: Latency L0s TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 Link: Latency L0s TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3 Link: Latency L0s TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Subsystem: Acer Incorporated [ALI] Unknown device 012f 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: Acer Incorporated [ALI] Unknown device 012f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 1810 [size=16] 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Acer Incorporated [ALI] Unknown device 012f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- &1 |:; /sbin/modprobe --ignore-install ata_piix include /etc/modprobe.d include /etc/modprobe.conf.local ------------------------------------------------------------------------------- 3.2 modprobe.conf.local - /etc/modprobe.conf.local no output ------------------------------------------------------------------------------- 3.3 grub - /boot/grub/menu.lst default 0 timeout 8 gfxmenu (hd0,6)/boot/message title Linux root (hd0,6) kernel /boot/vmlinuz-2.6.16.46-0.12-smp root=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2404SJDE6LKE-part7 vga=0x317 resume=/dev/sda6 splash=silent showopts initrd /boot/initrd-2.6.16.46-0.12-smp title Windows rootnoverify (hd0,0) chainloader (hd0,0)+1 title Failsafe root (hd0,6) kernel /boot/vmlinuz-2.6.16.46-0.12-smp root=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2404SJDE6LKE-part7 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3 initrd /boot/initrd-2.6.16.46-0.12-smp title Memory Test kernel (hd0,6)/boot/memtest.bin ------------------------------------------------------------------------------- 3.4 messages filtered tail -n 200 /var/log/messages Nov 21 17:30:20 linux pppd[4428]: Sent 160405 bytes, received 794742 bytes. Nov 21 17:30:20 linux pppd[4428]: restoring old default route to eth0 [192.168.1.1] Nov 21 17:30:20 linux pppd[4428]: restore default route ioctl(SIOCADDRT): Network is unreachable(101) Nov 21 17:30:20 linux pppd[4428]: Couldn't increase MTU to 1500 Nov 21 17:30:20 linux pppd[4428]: Couldn't increase MRU to 1500 Nov 21 17:30:20 linux pppd[4428]: Connection terminated. Nov 21 17:30:20 linux modify_resolvconf: restored /etc/resolv.conf.saved.by.pppd.dsl0 to /etc/resolv.conf Nov 21 17:30:20 linux modify_resolvconf: removing info block from /etc/resolv.conf, because there is no backup left Nov 21 17:30:20 linux ip-down: SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Nov 21 17:30:20 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Nov 21 17:30:20 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Nov 21 17:30:20 linux SuSEfirewall2: batch committing... Nov 21 17:30:20 linux SuSEfirewall2: Firewall rules successfully set Nov 21 17:30:20 linux pppd[4428]: Script /etc/ppp/ip-down finished (pid 5315), status = 0x0 Nov 21 17:30:20 linux pppd[4428]: Exit. Nov 21 17:30:20 linux ifdown-ppp: interface dsl0 is down Nov 21 17:30:20 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Nov 21 17:30:20 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Nov 21 17:30:21 linux SuSEfirewall2: batch committing... Nov 21 17:30:21 linux SuSEfirewall2: Firewall rules successfully set Nov 21 17:30:23 linux ifup: dsl0 Nov 21 17:30:23 linux ifup-ppp: interface dsl0 is up Nov 21 17:30:23 linux pppd[5604]: Plugin rp-pppoe.so loaded. Nov 21 17:30:23 linux pppd[5604]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.3 Nov 21 17:30:23 linux pppd[5604]: Plugin passwordfd.so loaded. Nov 21 17:30:23 linux pppd[5604]: pppd 2.4.3 started by root, uid 0 Nov 21 17:30:23 linux pppd[5604]: PPP session is 5993 Nov 21 17:30:23 linux kernel: ppp0 renamed to dsl0 Nov 21 17:30:23 linux pppd[5604]: Renamed interface ppp0 to dsl0 Nov 21 17:30:23 linux pppd[5604]: Using interface dsl0 Nov 21 17:30:23 linux pppd[5604]: Connect: dsl0 eth0 Nov 21 17:30:23 linux pppd[5604]: Couldn't increase MTU to 1500 Nov 21 17:30:23 linux pppd[5604]: Couldn't increase MRU to 1500 Nov 21 17:30:23 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Nov 21 17:30:23 linux rename_netiface: oldname ppp0 does not exist Nov 21 17:30:23 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Nov 21 17:30:23 linux pppd[5604]: CHAP authentication succeeded: Authentication success,Welcome! Nov 21 17:30:23 linux pppd[5604]: peer from calling number 00:E0:FC:7F:13:91 authorized Nov 21 17:30:23 linux pppd[5604]: local IP address 59.93.134.49 Nov 21 17:30:23 linux pppd[5604]: remote IP address 59.93.128.1 Nov 21 17:30:23 linux pppd[5604]: primary DNS address 218.248.255.145 Nov 21 17:30:23 linux pppd[5604]: secondary DNS address 218.248.255.161 Nov 21 17:30:23 linux SuSEfirewall2: batch committing... Nov 21 17:30:23 linux SuSEfirewall2: Firewall rules successfully set Nov 21 17:30:23 linux modify_resolvconf: Service pppd modified /etc/resolv.conf. See info block in this file Nov 21 17:30:23 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Nov 21 17:30:23 linux ip-up: SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Nov 21 17:30:24 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Nov 21 17:30:24 linux SuSEfirewall2: batch committing... Nov 21 17:30:24 linux SuSEfirewall2: Firewall rules successfully set Nov 21 17:30:24 linux pppd[5604]: Script /etc/ppp/ip-up finished (pid 5694), status = 0x0 Nov 21 17:39:28 linux su: (to root) chinu on /dev/pts/0 Nov 21 17:57:55 linux gconfd (chinu-4188): Exiting Nov 21 17:57:55 linux gconfd (chinu-8618): starting (version 2.12.1), pid 8618 user 'chinu' Nov 21 17:57:55 linux gconfd (chinu-8618): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Nov 21 17:57:55 linux gconfd (chinu-8618): Resolved address "xml:readwrite:/home/chinu/.gconf" to a writable configuration source at position 1 Nov 21 17:57:55 linux gconfd (chinu-8618): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Nov 21 17:57:56 linux gdm[3287]: GDM restarting ... Nov 21 17:58:07 linux gconfd (chinu-8618): Resolved address "xml:readwrite:/home/chinu/.gconf" to a writable configuration source at position 0 Nov 21 17:59:45 linux gconfd (chinu-8618): Exiting Nov 21 17:59:45 linux gdm[3287]: GDM restarting ... Nov 21 17:59:54 linux gconfd (chinu-11217): starting (version 2.12.1), pid 11217 user 'chinu' Nov 21 17:59:54 linux gconfd (chinu-11217): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Nov 21 17:59:54 linux gconfd (chinu-11217): Resolved address "xml:readwrite:/home/chinu/.gconf" to a writable configuration source at position 1 Nov 21 17:59:54 linux gconfd (chinu-11217): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Nov 21 17:59:54 linux gconfd (chinu-11217): Resolved address "xml:readwrite:/home/chinu/.gconf" to a writable configuration source at position 0 Nov 21 18:00:20 linux ifup: dsl0 Nov 21 18:00:20 linux ifup-ppp: interface dsl0 is up Nov 21 18:00:21 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Nov 21 18:00:21 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Nov 21 18:00:21 linux SuSEfirewall2: batch committing... Nov 21 18:00:21 linux SuSEfirewall2: Firewall rules successfully set Nov 21 18:01:58 linux gconfd (root-11592): starting (version 2.12.1), pid 11592 user 'root' Nov 21 18:01:58 linux gconfd (root-11592): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Nov 21 18:01:58 linux gconfd (root-11592): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Nov 21 18:01:58 linux gconfd (root-11592): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Nov 21 18:02:22 linux kernel: lp: driver loaded but no devices found Nov 21 18:02:22 linux kernel: st: Version 20050830, fixed bufsize 32768, s/g segs 256 Nov 21 18:02:28 linux kernel: ieee80211_crypt_tkip: module not supported by Novell, setting U taint flag. Nov 21 18:02:28 linux kernel: ieee80211_crypt: registered algorithm 'TKIP' Nov 21 18:02:29 linux kernel: ieee80211_crypt_ccmp: module not supported by Novell, setting U taint flag. Nov 21 18:02:29 linux kernel: ieee80211_crypt: registered algorithm 'CCMP' Nov 21 18:03:58 linux gconfd (root-11592): GConf server is not in use, shutting down. Nov 21 18:03:58 linux gconfd (root-11592): Exiting Nov 21 18:06:44 linux gconfd (chinu-11217): Exiting Nov 21 18:06:44 linux gdm[3287]: Master halting... Nov 21 18:06:45 linux shutdown[3287]: shutting down for system halt Nov 21 18:06:46 linux init: Switching to runlevel: 0 Nov 21 18:06:47 linux kernel: bootsplash: status on console 0 changed to on Nov 21 18:06:47 linux auditd[3124]: The audit daemon is exiting. Nov 21 18:06:47 linux kernel: audit(1195648607.194:7): audit_pid=0 old=3124 by auid=4294967295 Nov 21 18:06:47 linux smpppd[3249]: terminating on signal 15 Nov 21 18:06:47 linux zmd: ShutdownManager (WARN): Preparing to shut down... Nov 21 18:06:47 linux zmd: ShutdownManager (WARN): Shutting down daemon... Nov 21 18:06:47 linux sshd[3263]: Received signal 15; terminating. Nov 21 18:06:48 linux kernel: ACPI: PCI interrupt for device 0000:00:1b.0 disabled Nov 21 18:06:49 linux kernel: Kernel logging (proc) stopped. Nov 21 18:06:49 linux kernel: Kernel log daemon terminating. Nov 21 18:06:50 linux syslog-ng[2698]: syslog-ng version 1.6.8 going down Nov 21 21:41:24 linux syslog-ng[2784]: syslog-ng version 1.6.8 starting Nov 21 21:41:25 linux network: Starting the DHCP DBUS Daemon Nov 21 21:41:25 linux network: Starting the NetworkManagerDispatcher Nov 21 21:41:26 linux network: Starting the NetworkManager Nov 21 21:41:26 linux network: If service network should wait until connection is established Nov 21 21:41:26 linux network: then set /etc/sysconfig/network/config:NM_ONLINE_TIMEOUT Nov 21 21:41:27 linux auditd[3123]: Init complete, auditd 1.2.9 listening for events Nov 21 21:41:28 linux dhcdbd: Started up. Nov 21 21:41:28 linux rcpowersaved: enter 'speedstep_centrino' into CPUFREQD_MODULE in /etc/powersave/cpufreq. Nov 21 21:41:28 linux rcpowersaved: this will speed up starting powersaved and avoid unnecessary warnings in syslog. Nov 21 21:41:29 linux rcpowersaved: s2ram does not know your machine. See 's2ram -i' for details. (127) Nov 21 21:41:29 linux rcpowersaved: Use SUSPEND2RAM_FORCE=yes to override this detection. Nov 21 21:41:29 linux sshd[3345]: Server listening on 0.0.0.0 port 22. Nov 21 21:41:29 linux kernel: klogd 1.4.1, log source = /proc/kmsg started. Nov 21 21:41:29 linux kernel: audit(1195661477.290:2): AppArmor (version 2.0-19.43r6320) initialized Nov 21 21:41:29 linux syslog-ng[2784]: Changing permissions on special file /dev/xconsole Nov 21 21:41:29 linux syslog-ng[2784]: Changing permissions on special file /dev/tty10 Nov 21 21:41:29 linux kernel: Nov 21 21:41:29 linux kernel: ip6_tables: © 2000-2006 Netfilter Core Team Nov 21 21:41:29 linux kernel: ip_tables: © 2000-2006 Netfilter Core Team Nov 21 21:41:29 linux kernel: Netfilter messages via NETLINK v0.30. Nov 21 21:41:29 linux kernel: ip_conntrack version 2.4 (8116 buckets, 64928 max) - 232 bytes per conntrack Nov 21 21:41:29 linux kernel: ACPI: AC Adapter [ADP1] (on-line) Nov 21 21:41:29 linux kernel: ACPI: Battery Slot [BAT0] (battery present) Nov 21 21:41:29 linux kernel: ACPI: Power Button (FF) [PWRF] Nov 21 21:41:29 linux kernel: ACPI: Lid Switch [LID0] Nov 21 21:41:29 linux kernel: ACPI: Sleep Button (CM) [SLPB] Nov 21 21:41:29 linux kernel: IA-32 Microcode Update Driver: v1.14 Nov 21 21:41:29 linux kernel: IA-32 Microcode Update Driver v1.14 unregistered Nov 21 21:41:29 linux kernel: audit(1195661487.503:3): audit_pid=3123 old=0 by auid=4294967295 Nov 21 21:41:29 linux smpppd[3294]: smpppd version 1.59 started Nov 21 21:41:32 linux /usr/sbin/cron[3619]: (CRON) STARTUP (V5.0) Nov 21 21:41:36 linux kernel: tg3: eth0: Link is up at 100 Mbps, full duplex. Nov 21 21:41:36 linux kernel: tg3: eth0: Flow control is off for TX and off for RX. Nov 21 21:41:37 linux kernel: NET: Registered protocol family 17 Nov 21 21:41:39 linux dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 2 Nov 21 21:41:39 linux dhclient: DHCPOFFER from 192.168.1.1 Nov 21 21:41:41 linux hp: unable to open /var/run/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 84 Nov 21 21:41:43 linux kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177 Nov 21 21:41:43 linux kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64 Nov 21 21:41:43 linux kernel: [drm] Initialized i915 1.4.0 20060119 on minor 0: Nov 21 21:41:43 linux kernel: [drm] Used old pci detect: framebuffer loaded Nov 21 21:41:44 linux dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 Nov 21 21:41:44 linux dhclient: DHCPACK from 192.168.1.1 Nov 21 21:41:44 linux dhclient: bound to 192.168.1.4 -- renewal in 1517 seconds. Nov 21 21:41:46 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Nov 21 21:41:46 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Nov 21 21:41:46 linux SuSEfirewall2: batch committing... Nov 21 21:41:47 linux SuSEfirewall2: Firewall rules successfully set Nov 21 21:42:00 linux zmd: Daemon (WARN): Not starting remote web server Nov 21 21:42:04 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3 Nov 21 21:42:04 linux kernel: ISO 9660 Extensions: RRIP_1991A Nov 21 21:42:22 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Nov 21 21:42:22 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Nov 21 21:42:22 linux SuSEfirewall2: batch committing... Nov 21 21:42:22 linux SuSEfirewall2: Firewall rules successfully set Nov 21 21:42:26 linux gconfd (chinu-4168): starting (version 2.12.1), pid 4168 user 'chinu' Nov 21 21:42:26 linux gconfd (chinu-4168): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Nov 21 21:42:26 linux gconfd (chinu-4168): Resolved address "xml:readwrite:/home/chinu/.gconf" to a writable configuration source at position 1 Nov 21 21:42:26 linux gconfd (chinu-4168): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Nov 21 21:42:32 linux gconfd (chinu-4168): Resolved address "xml:readwrite:/home/chinu/.gconf" to a writable configuration source at position 0 Nov 21 21:43:00 linux ifup: dsl0 Nov 21 21:43:00 linux ifup-ppp: interface dsl0 is up Nov 21 21:43:00 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Nov 21 21:43:00 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Nov 21 21:43:00 linux SuSEfirewall2: batch committing... Nov 21 21:43:00 linux SuSEfirewall2: Firewall rules successfully set Nov 21 21:43:00 linux pppd[4398]: Plugin rp-pppoe.so loaded. Nov 21 21:43:00 linux kernel: CSLIP: code copyright 1989 Regents of the University of California Nov 21 21:43:00 linux kernel: PPP generic driver version 2.4.2 Nov 21 21:43:00 linux pppd[4398]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.3 Nov 21 21:43:00 linux pppd[4398]: Plugin passwordfd.so loaded. Nov 21 21:43:00 linux pppd[4398]: pppd 2.4.3 started by root, uid 0 Nov 21 21:43:00 linux pppd[4398]: PPP session is 8244 Nov 21 21:43:00 linux kernel: NET: Registered protocol family 24 Nov 21 21:43:00 linux kernel: ppp0 renamed to dsl0 Nov 21 21:43:00 linux pppd[4398]: Renamed interface ppp0 to dsl0 Nov 21 21:43:00 linux pppd[4398]: Using interface dsl0 Nov 21 21:43:00 linux pppd[4398]: Connect: dsl0 eth0 Nov 21 21:43:00 linux pppd[4398]: Couldn't increase MTU to 1500 Nov 21 21:43:00 linux pppd[4398]: Couldn't increase MRU to 1500 Nov 21 21:43:00 linux rename_netiface: oldname ppp0 does not exist Nov 21 21:43:03 linux pppd[4398]: CHAP authentication succeeded: Authentication success,Welcome! Nov 21 21:43:03 linux pppd[4398]: peer from calling number 00:E0:FC:7F:13:91 authorized Nov 21 21:43:03 linux pppd[4398]: replacing old default route to eth0 [192.168.1.1] Nov 21 21:43:03 linux pppd[4398]: local IP address 59.93.129.135 Nov 21 21:43:03 linux pppd[4398]: remote IP address 59.93.128.1 Nov 21 21:43:03 linux pppd[4398]: primary DNS address 218.248.255.145 Nov 21 21:43:03 linux pppd[4398]: secondary DNS address 218.248.255.161 Nov 21 21:43:04 linux modify_resolvconf: Service pppd modified /etc/resolv.conf. See info block in this file Nov 21 21:43:04 linux ip-up: SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Nov 21 21:43:04 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Nov 21 21:43:04 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Nov 21 21:43:04 linux SuSEfirewall2: batch committing... Nov 21 21:43:04 linux SuSEfirewall2: Firewall rules successfully set Nov 21 21:43:04 linux pppd[4398]: Script /etc/ppp/ip-up finished (pid 4530), status = 0x0 Nov 21 21:51:43 linux gconfd (root-4895): starting (version 2.12.1), pid 4895 user 'root' Nov 21 21:51:43 linux gconfd (root-4895): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Nov 21 21:51:43 linux gconfd (root-4895): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Nov 21 21:51:43 linux gconfd (root-4895): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Nov 21 21:51:53 linux kernel: st: Version 20050830, fixed bufsize 32768, s/g segs 256 ------------------------------------------------------------------------------- 7. XFree86 ------------------------------------------------------------------------------- 4.1 xf86config4 - /etc/X11/xorg.conf Section "Files" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/local" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/URW" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1" FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/kwintv" FontPath "/usr/X11R6/lib/X11/fonts/truetype" FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/CID" FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1" FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/xtest" FontPath "/opt/kde3/share/fonts" InputDevices "/dev/gpmdata" InputDevices "/dev/input/mice" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "on" EndSection Section "Module" Load "dbe" Load "type1" Load "freetype" Load "extmod" Load "glx" Load "v4l" Load "dri" EndSection Section "InputDevice" Driver "kbd" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "us" Option "XkbModel" "pc104" Option "XkbRules" "xfree86" EndSection Section "InputDevice" Driver "synaptics" Identifier "Mouse[1]" Option "Buttons" "5" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "on" Option "InputFashion" "Mouse" Option "Name" "Synaptics;Touchpad" Option "Protocol" "explorerps/2" Option "SHMConfig" "on" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Driver "mouse" Identifier "Mouse[3]" Option "Buttons" "5" Option "Device" "/dev/input/mice" Option "Name" "ImPS/2 Generic Wheel Mouse" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" DisplaySize 300 190 HorizSync 30-62 Identifier "Monitor[0]" ModelName "AUO LCD MONITOR" Option "DPMS" VendorName "AUO" VertRefresh 43-60 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1280x800" 80.58 1280 1344 1480 1680 800 801 804 827 EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1280x800" EndSubSection SubSection "Display" Depth 16 Modes "1280x800" EndSubSection SubSection "Display" Depth 24 Modes "1280x800" EndSubSection SubSection "Display" Depth 8 Modes "1280x800" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Device" BoardName "945 GM" BusID "0:2:0" Driver "i810" Identifier "Device[0]" Option "NoDDC" Option "NoDDC" Option "Clone" "yes" Option "CloneRefresh" "50-60" Option "SaXDualVSync" "50-60" Option "SaXDualHSync" "off" Option "MonitorLayout" "CRT,LFP" Option "SaXDualHead" "" Option "SaXDualMode" "off" Option "SaXDualMonitorModel" "1024X768@60HZ" Option "SaXDualMonitorVendor" "--> VESA" Option "SaXDualOrientation" "off" Option "SaXDualResolution" "off" VendorName "Intel" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" InputDevice "Mouse[3]" "SendCoreEvents" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" EndSection Section "DRI" Group "video" Mode 0660 EndSection Section "Extensions" EndSection ------------------------------------------------------------------------------- 4.2 sysp - /usr/sbin/sysp -s mouse Mouse0 => Protocol : explorerps/2 Mouse0 => Device : /dev/input/mice Mouse0 => Buttons : 3 Mouse0 => Wheel : 2 Mouse0 => Emulate : 0 Mouse0 => Name : USB-compliant keyboard Mouse0 => VendorID : 0x062a Mouse0 => DeviceID : 0x0201 Mouse0 => Profile : Mouse0 => RealDevice : /dev/input/event5 Mouse0 => NutShell : 1 Mouse1 => Protocol : explorerps/2 Mouse1 => Device : /dev/input/mice Mouse1 => Buttons : 5 Mouse1 => Wheel : 1 Mouse1 => Emulate : 0 Mouse1 => Name : USB Optical Mouse Mouse1 => VendorID : 0x15ca Mouse1 => DeviceID : 0x00c3 Mouse1 => Profile : Mouse1 => RealDevice : /dev/input/event3 Mouse1 => NutShell : 0 Mouse2 => Protocol : explorerps/2 Mouse2 => Device : /dev/input/mice Mouse2 => Buttons : 5 Mouse2 => Wheel : 1 Mouse2 => Emulate : 0 Mouse2 => Name : SynPS/2 Synaptics TouchPad Mouse2 => VendorID : 0x0212 Mouse2 => DeviceID : 0x0001 Mouse2 => Profile : synaptics Mouse2 => RealDevice : /dev/input/event2 Mouse2 => NutShell : 0 sysp - /usr/sbin/sysp -c Chip: 0 is -> Intel 945 GM 00:02:0 0x8086 0x27a2 PCI i810 sysp - /usr/sbin/sysp -s keyboard Keyboard0 => XkbModel : pc104 Keyboard0 => XkbLayout : us Keyboard0 => Name : USB-compliant keyboard Keyboard0 => RealDevice : /dev/input/event4 Keyboard1 => XkbModel : pc104 Keyboard1 => XkbLayout : us Keyboard1 => Name : AT Translated Set 2 keyboard Keyboard1 => RealDevice : /dev/input/event0 ------------------------------------------------------------------------------- 4.3 Framebuffer - /usr/sbin/hwinfo --framebuffer 02: None 00.0: 11001 VESA Framebuffer [Created at bios.445] Unique ID: rdCR.il6towt04X5 Hardware Class: framebuffer Model: "Intel® 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS Intel® 82945GM Chipset Family Graphics Controller" Vendor: "Intel Corporation" Device: "Intel® 82945GM Chipset Family Graphics Controller" SubVendor: "Intel® 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS" SubDevice: Revision: "Hardware Version 0.0" Memory Size: 12 MB Memory Range: 0xc0000000-0xc0bfffff (rw) Mode 0x0360: 1280x800 (+1280), 8 bits Mode 0x0361: 1280x800 (+2560), 16 bits Mode 0x0362: 1280x800 (+5120), 24 bits Mode 0x033c: 1280x800 (+1280), 8 bits Mode 0x034d: 1280x800 (+2560), 16 bits Mode 0x035c: 1280x800 (+5120), 24 bits Mode 0x0305: 1024x768 (+1024), 8 bits Mode 0x0317: 1024x768 (+2048), 16 bits Mode 0x0318: 1024x768 (+4096), 24 bits Mode 0x0312: 640x480 (+2560), 24 bits Mode 0x0314: 800x600 (+1600), 16 bits Mode 0x0315: 800x600 (+3200), 24 bits Mode 0x0301: 640x480 (+640), 8 bits Mode 0x0303: 800x600 (+832), 8 bits Mode 0x0311: 640x480 (+1280), 16 bits Config Status: cfg=no, avail=yes, need=no, active=unknown ------------------------------------------------------------------------------- ##Y2support-/tmp/siga/siga.txt-- |
|
|||
|
http://forums.suselinuxsupport.de/index.ph...mp;hl=bluetooth
http://forums.suselinuxsupport.de/index.ph...mp;hl=bluetooth http://forums.suselinuxsupport.de/index.ph...mp;hl=bluetooth have a read of these,might help andy |
|
|||
|
I referred to your third link and found the link to be quite interesting .... The libbtcl package is not present.. as I am running SUSE Linux Enterprise Desktop SP 1.. now what to do ?
|
|
|||
|
Ah ! SLED 10. haven't a clue, sorry,thought you were using opensuse,as i didn't see your edited post
andy |
|
|||
|
sorry for giving wrong info... any way it worked after starting the system again(after i started the bluetooth service) Thanks deltaflyer
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|