Screen Blank After Se Installation Of Suse Linux 9.3

Hi everyone,
I just bought a new compaq presario notebook (V2000) model) and installed Suse Linux on it, But when I boot in Suse Linux my display doesn't work, i.e the screen remains blank I can't understand what the problem is . When I boot Suse in text mode it works fine, whenever I switch to GUI the screen becomes blank.
Any help will be gratly apreciated...

Here are a few specs and configuration files

when I run xmode command I get a refresh rate of 140hz, I know thats not right, but I can't correct it

Also in Xorg.0.log I noticed these lines

(II) I810(0): Display Info: CRT: attached: FALSE, present: TRUE, size: (800,600)
(II) I810(0): Display Info: TV: attached: FALSE, present: TRUE, size: (1024,768)
(II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (1280,768)
(II) I810(0): Display Info: CRT2 (second CRT): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,2059)
(WW) I810(0): Extended BIOS function 0x5f64 failed.
(WW) I810(0): SetDisplayDevices call failed, writing config directly to SWF0.

I think There must be something wrong with the first line which shows CRT is present.

Here are a few files I'm pasting if you all would need them
thanks bye;

ouput of lspci
--------------

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
06:06.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
06:09.0 CardBus bridge: Texas Instruments Texas Instruments PCIxx21/x515 Cardbus Controller
06:09.2 FireWire (IEEE 1394): Texas Instruments Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:09.3 Unknown mass storage controller: Texas Instruments Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:09.4 Class 0805: Texas Instruments Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD)
---------------------------------------------------------------------------------------------




xorg.conf
-----------
# /.../
# SaX generated X11 config file
# Created on: 2006-04-14T19:05:35-0600.
#
# Version: 4.8
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [SaX2] (4.8)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection

Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection

Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Device" "/dev/input/mice"
Option "Name" "PS/2 Generic Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
EndSection


Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
HorizSync 31-38
Identifier "Monitor[0]"
ModelName "800X600@60HZ"
Option "DPMS"
VendorName "--> VESA"
VertRefresh 50-60
UseModes "Modes[0]"
EndSection


Section "Modes"
Identifier "Modes[0]"
Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync
EndSection


Section "Device"
BoardName "915 GM"
BusID "0:2:0"
Driver "i810"
Identifier "Device[0]"
Option "NoDDC"
VendorName "Intel"
EndSection


Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 32
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection


Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Screen "Screen[0]"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

--------------------------------------------------------------------------------

have a look here & see if that helps

andy