|
||||||
| Forums FAQ | Members List | Search | Today's Posts | Mark Forums Read |
| ARCHIVES - Notebooks This is a special forum dedicated to notebook problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Since the solutions for my last problem was so simple I try with a harder one. Just to make life difficult I removed the TV Cardbus card and tried my 3G Option Globetrotter card. No luck.
Was supposed to use the howto from PHARscape to setup the card. From "/var/log/messages" i got this when inserting the card: Mar 31 13:23:15 roy2 kernel: PCI: Enabling device 0000:02:00.0 (0000 -> 0002) Mar 31 13:23:15 roy2 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169 Mar 31 13:23:15 roy2 kernel: PCI: Setting latency timer of device 0000:02:00.0 to 64 Mar 31 13:23:15 roy2 kernel: ohci_hcd 0000:02:00.0: OHCI Host Controller Mar 31 13:23:15 roy2 kernel: ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 Mar 31 13:23:15 roy2 kernel: ohci_hcd 0000:02:00.0: irq 169, io mem 0x1a000000 Mar 31 13:23:15 roy2 kernel: ohci_hcd 0000:02:00.0: USB HC reset timed out! Mar 31 13:23:15 roy2 kernel: ohci_hcd 0000:02:00.0: can't start Mar 31 13:23:15 roy2 kernel: ohci_hcd 0000:02:00.0: startup error -1 Mar 31 13:23:15 roy2 kernel: ohci_hcd 0000:02:00.0: USB bus 4 deregistered Mar 31 13:23:15 roy2 kernel: ACPI: PCI interrupt for device 0000:02:00.0 disabled Mar 31 13:23:15 roy2 kernel: ohci_hcd 0000:02:00.0: init 0000:02:00.0 fail, -1 Mar 31 13:23:15 roy2 kernel: ohci_hcd: probe of 0000:02:00.0 failed with error -1 Mar 31 13:23:15 roy2 kernel: PCI: Enabling device 0000:02:00.1 (0000 -> 0002) Mar 31 13:23:15 roy2 kernel: ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 169 Mar 31 13:23:15 roy2 kernel: PCI: Setting latency timer of device 0000:02:00.1 to 64 Mar 31 13:23:15 roy2 kernel: ohci_hcd 0000:02:00.1: OHCI Host Controller Mar 31 13:23:23 roy2 kernel: ohci_hcd 0000:02:00.1: USB HC takeover failed! (BIOS/SMM bug) Mar 31 13:23:23 roy2 kernel: ohci_hcd 0000:02:00.1: can't reset Mar 31 13:23:23 roy2 kernel: ACPI: PCI interrupt for device 0000:02:00.1 disabled Mar 31 13:23:23 roy2 kernel: ohci_hcd 0000:02:00.1: init 0000:02:00.1 fail, -16 Mar 31 13:23:23 roy2 kernel: ohci_hcd: probe of 0000:02:00.1 failed with error -16 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|