Problem Accessing Dvds Burned With Udf

What could be causing problems when I try to read some DVDs burned on windows using the UDF filesystem ???

I can read them w/out problems using VMWare Workstation (from window xp as guess) but I cannt read them from OS 10.3, when I try to access them, the following error appears:



This is a little log took from dmesg (by running the suggested command at the window warning):

Dixie7:/ # dmesg | tail
attempt to access beyond end of device
sr0: rw=0, want=18446744073709172804, limit=8137344
UDF-fs: No partition found (1)
SFW2-INext-ACC IN=eth0 OUT= MAC=00:19:db:b2:73:e2:00:1b:11:66:ac:cd:08:00 SRC=83.230.139.74 DST=192.168.0.2 LEN=68 TOS=0x00 PREC=0x00 TTL=111 ID=49667 PROTO=UDP SPT=4672 DPT=12520 LEN=48
SFW2-INext-ACC IN=eth0 OUT= MAC=00:19:db:b2:73:e2:00:1b:11:66:ac:cd:08:00 SRC=88.27.8.231 DST=192.168.0.2 LEN=68 TOS=0x00 PREC=0x00 TTL=117 ID=42280 PROTO=UDP SPT=32855 DPT=12520 LEN=48
SFW2-INext-ACC IN=eth0 OUT= MAC=00:19:db:b2:73:e2:00:1b:11:66:ac:cd:08:00 SRC=85.144.92.81 DST=192.168.0.2 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=496 DF PROTO=TCP SPT=37460 DPT=43912 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405B401010402)
SFW2-INext-ACC IN=eth0 OUT= MAC=00:19:db:b2:73:e2:00:1b:11:66:ac:cd:08:00 SRC=60.49.41.69 DST=192.168.0.2 LEN=68 TOS=0x00 PREC=0x00 TTL=109 ID=15958 PROTO=UDP SPT=62710 DPT=12520 LEN=48
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=124.161.239.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39301 DF PROTO=TCP SPT=28141 DPT=7116 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A0129AF81000133FB)
SFW2-INext-ACC IN=eth0 OUT= MAC=00:19:db:b2:73:e2:00:1b:11:66:ac:cd:08:00 SRC=122.13.224.30 DST=192.168.0.2 LEN=52 TOS=0x00 PREC=0x00 TTL=41 ID=18736 DF PROTO=TCP SPT=32339 DPT=43912 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405AC0103030201010402)
SFW2-INext-ACC IN=eth0 OUT= MAC=00:19:db:b2:73:e2:00:1b:11:66:ac:cd:08:00 SRC=189.166.37.75 DST=192.168.0.2 LEN=81 TOS=0x00 PREC=0x00 TTL=117 ID=13338 PROTO=UDP SPT=61308 DPT=12520 LEN=61

It's quite strange since OS 10.3 should be able to read w/out problems this media filesystem right ??? :blink:

Not sure if this is the relevant to openSUSE 10.3, (as I'm still using 10.2), but do you have udftools rpm installed? I have had issues like this with reading vista burnt udf DVDs.... not sure why though.

Have you tried manually mounting with something like

mount -t udf /dev/sr0 /media/cdrom (where /media/cdrom exists of course)

I wish I could offer more help.

Edit: Could this be a udf 2.5 issue I'm reading about? Or red herring?