Xorg/xfree86 Config With 2 Screens

This is mine xorg.conf with 2 screen support (one crt and one tv) on one Xserver.
So you can easy launch e.g. a movie on the second screen with:

DISPLAY=:0.1 mplayer movie.avi

Also nice feature is if you add ~/.kde/share/apps/konqueror/servicemenus/mplayertv.desktop

[Desktop Entry]
Actions=PlayOnTV
Encoding=UTF-8
ServiceTypes=video/*

[Desktop Action PlayOnTV]
Exec=DISPLAY=:0.1 mplayer -fs %F
Name=Play this movie on TV
Icon=yast_tv

If you now right click on a movie and look by actions there is now the option "Play this movie on tv"

# **********************************************************************
# This loads the Type1 and FreeType font modules
# **********************************************************************

KNIP

# **********************************************************************
# Files section.**This allows default font and rgb paths to be set
# **********************************************************************

KNIP

# **********************************************************************
# Section ServerFlags
# **********************************************************************

Section "ServerFlags"
**Option****** "AllowMouseOpenFail"
EndSection

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"
****Driver****** "keyboard"
****Identifier** "Keyboard[0]"
****Option****** "Protocol" "Standard"
****Option****** "XkbLayout" "us"
****Option****** "XkbModel" "pc104"
****Option****** "XkbRules" "xfree86"
EndSection

# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# Mouse is a Logitech premium optical wheelmouse

Section "InputDevice"
****Driver****** "mouse"
****Identifier** "Mouse[1]"
****Option****** "Buttons" "5"
****Option****** "Device" "/dev/input/mice"
****Option****** "Name" "Autodetection"
****Option****** "Protocol" "imps/2"
****Option****** "Vendor" "Sysp"
****Option****** "ZAxisMapping" "4 5"
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

Section "Monitor"
****DisplaySize**320 240
****HorizSync****28-85
****Identifier** "Monitor[0]"
****ModelName****"V700"
****Option****** "DPMS"
****VendorName** "COMPAQ"
****VertRefresh**50-160
****UseModes**** "Modes[0]"
EndSection

Section "Monitor"
****Identifier "TV" 
****HorizSync 60
****VertRefresh 30-150
EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
****BoardName**** "GeForce4 GTS"
****BusID******** "1:0:0"
****Driver********"nvidia"
****Identifier****"nvidia0"
****VendorName****"NVidia"
****Screen********0
****Option********"NvAGP" "2"
EndSection

Section "Device"
****BoardName**** "GeForce4 GTS"
****BusId******** "1:0:0"
****Driver********"nvidia"
****Identifier****"nvidia1"
****VendorName****"NVidia"
****Screen********1
****Option********"NvAGP" "2"
****Option "ConnectedMonitor" "CRT, TV"
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
****Identifier**"Screen0"
****Device******"nvidia0"
****Monitor**** "Monitor[0]"
****DefaultDepth 24
****Subsection "Display"
********Depth****** 24
********Modes****** "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
****EndSubsection
EndSection

Section "Screen"
****Identifier**"Screen TV"
****Device******"nvidia1"
****Monitor**** "TV"
****Option**"TVStandard"****"PAL-B"
****Option**"TVOutFormat"** "SVIDEO"
****DefaultDepth 24
****Subsection "Display"
********Depth****** 24
********Modes******"800x600"
********ViewPort**0 0
****EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

Section "ServerLayout"
****Identifier** "Simple Layout"
****Screen 0 "Screen0" 0 0
****Screen 1 "Screen TV" leftof "Screen0"

****InputDevice**"Keyboard[0]" "CoreKeyboard"
****InputDevice**"Mouse[1]" "CorePointer"
EndSection

# **********************************************************************
# DRI section.
# **********************************************************************

Section "DRI"
** Group******"video"
** Mode****** 0660
EndSection

# **********************************************************************
# The End
# **********************************************************************

Also if you want bigger subtitles with mplayer (for better tv display) you can do this.
Download a font package (I use in this example the "Arial - Western (ISO 8859-1) (4 sizes)" package)and install it by:
tar -jxvf font-arial-iso-8859-1.tar.bz2
cd font-arial-iso-8859-1
cp -r font* /usr/local/share/mplayer/font (as root for system wide)
cd ~/.mplayer
e.g. (font choice)
ln -s /usr/local/share/mplayer/font/font-arial-28-iso-8859-1 font

You should now have big :blink: subtitles.

- Suse 10.0 32bit
- Ati Radeon 9800 Pro
- ATI's own 3d drivers (fglrx)
- Dual TFT monitor (1280x1024)
- Xinemera

Installation is simple:

a) Run 'glxgears', note your avarage framerate.
a) Install package 'kernel-source' with Yast
b ) Download Ati's Linux driver installer
c) Run as root './ati-driver-installer-8.21.7-i386.run --buildpkg SuSE/SUSE101-IA32'
d) Run as root 'rpm -Uhv fglrx_6_8_0_SUSE100-8.21.7-1.i386.rpm' (version numbers can change, of course)
e) Place the attached xorg.conf in /etc/X11/xorg.conf (backup first!)
f) Restart X (or your whole computer)
g) Run 'glxgears'. Your framerate should be higher now because of the 3D support.

xorg.conf

# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.**IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
****Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#****Group 100****# users
#****Mode 0660
EndSection

# **********************************************************************
# Module section -- this**section**is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

****Load********"dbe"******# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
****SubSection**"extmod"
******Option****"omit xfree86-dga"** # don't initialise the DGA extension
****EndSubSection

# This loads the Type1 and FreeType font modules
****Load********"type1"
****Load********"freetype"

# This loads the GLX module
****Load********"glx"** # libglx.a
****Load********"dri"** # libdri.a

EndSection

# **********************************************************************
# Files section.**This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"
**FontPath**** "/usr/X11R6/lib/X11/fonts/misc:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/local"
**FontPath**** "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/Type1"
**FontPath**** "/usr/X11R6/lib/X11/fonts/URW"
**FontPath**** "/usr/X11R6/lib/X11/fonts/Speedo"
**FontPath**** "/usr/X11R6/lib/X11/fonts/PEX"
**FontPath**** "/usr/X11R6/lib/X11/fonts/cyrillic"
**FontPath**** "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/latin2/Type1"
**FontPath**** "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/kwintv"
**FontPath**** "/usr/X11R6/lib/X11/fonts/truetype"
**FontPath**** "/usr/X11R6/lib/X11/fonts/uni:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/CID"
**FontPath**** "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/hellas/Type1"
**FontPath**** "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
**FontPath**** "/usr/X11R6/lib/X11/fonts/xtest"
**FontPath**** "/opt/kde3/share/fonts"
**InputDevices "/dev/ttyS0"
**InputDevices "/dev/ttyS1"
**InputDevices "/dev/ttyS2"
**InputDevices "/dev/ttyS3"
**InputDevices "/dev/ttyS4"
**InputDevices "/dev/ttyS5"
**InputDevices "/dev/ttyS6"
**InputDevices "/dev/ttyS7"
**InputDevices "/dev/ttyS8"
**InputDevices "/dev/psaux"
**InputDevices "/dev/logibm"
**InputDevices "/dev/sunmouse"
**InputDevices "/dev/atibm"
**InputDevices "/dev/amigamouse"
**InputDevices "/dev/atarimouse"
**InputDevices "/dev/inportbm"
**InputDevices "/dev/gpmdata"
**InputDevices "/dev/mouse"
**InputDevices "/dev/usbmouse"
**InputDevices "/dev/adbmouse"
**InputDevices "/dev/input/mice"
**InputDevices "/dev/input/event0"
**InputDevices "/dev/pointer0"
**InputDevices "/dev/pointer1"
**InputDevices "/dev/pointer2"
**InputDevices "/dev/pointer3"
EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.**This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#****Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#****Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.**This allows clients to receive these key events.

****Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#****Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#****Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#****Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#****Option "AllowNonLocalModInDev"

# allows the server to start up even if the mouse doesn't work 

**Option****** "AllowMouseOpenFail"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

****Identifier****"Keyboard1"
****Driver****"kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#****Option "Protocol"** "Xqueue"

****Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#****Option "Xleds"******"1 2 3"

#****Option "LeftAlt"****"Meta"
#****Option "RightAlt"** "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).**For example, for a non-U.S.
# keyboard, you will probably want to use:
#****Option "XkbModel"** "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#****Option "XkbModel"** "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#****Option "XkbLayout"**"de"
# or:
#****Option "XkbLayout"**"de"
#****Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#****Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#****Option "XkbRules"** "xfree86"
#****Option "XkbModel"** "pc101"
#****Option "XkbLayout"**"us"
#****Option "XkbVariant" ""
#****Option "XkbOptions" ""

#****Option "XkbDisable"

****Option "XkbRules"****"xfree86"
****Option "XkbModel"****"pc104"
****Option "XkbLayout"****"us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

****Identifier****"Mouse1"
****Driver "mouse"
****Option "Buttons" "5"
****Option "Protocol" "explorerps/2"
****Option "ZAxisMapping"** "4 5"
****Option "Device"**** "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#****Option "Protocol"** "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#****Option "BaudRate"** "9600"
#****Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#****Option "Emulate3Buttons"
#****Option "Emulate3Timeout"****"50"

# ChordMiddle is an option for some 3-button Logitech mice

#****Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.**This is for example only.**Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#****Identifier**"Mouse2"
#****Driver******"mouse"
#****Option******"Protocol"******"MouseMan"
#****Option******"Device"********"/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#****Identifier "spaceball"
#****Driver**** "magellan"
#****Option**** "Device"******** "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#****Identifier "spaceball2"
#****Driver**** "spaceorb"
#****Option**** "Device"******** "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#****Identifier "touchscreen0"
#****Driver**** "microtouch"
#****Option**** "Device"******** "/dev/ttyS0"
#****Option**** "MinX"********** "1412"
#****Option**** "MaxX"********** "15184"
#****Option**** "MinY"********** "15372"
#****Option**** "MaxY"********** "1230"
#****Option**** "ScreenNumber"** "0"
#****Option**** "ReportingMode"**"Scaled"
#****Option**** "ButtonNumber"** "1"
#****Option**** "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#****Identifier "touchscreen1"
#****Driver**** "elo2300"
#****Option**** "Device"******** "/dev/ttyS0"
#****Option**** "MinX"********** "231"
#****Option**** "MaxX"********** "3868"
#****Option**** "MinY"********** "3858"
#****Option**** "MaxY"********** "272"
#****Option**** "ScreenNumber"** "0"
#****Option**** "ReportingMode"**"Scaled"
#****Option**** "ButtonThreshold"****"17"
#****Option**** "ButtonNumber"** "1"
#****Option**** "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
****Identifier**"Monitor0"

**Option****** "CalcAlgorithm" "XServerPool"
**DisplaySize**340 270
**HorizSync****30-83
**ModelName****"JT178X4"
**Option****** "DPMS"
**VendorName** "JEN"
**VertRefresh**43-75


# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017**+hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"**109.62**1280 1336 1472 1720**1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode 
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
****Identifier**"Standard VGA"
****VendorName**"Unknown"
****BoardName** "Unknown"

# The chipset line is optional in most cases.**It can be used to override
# the driver's chipset detection, and should not normally be specified.

#****Chipset**** "generic"

# The Driver line must be present.**When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.**Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

****Driver******"vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.**When this line isn't present, a device
# section can only match up with the primary video device.**For PCI
# devices a line like the following could be used.**This line should not
# normally be included unless there is more than one video device
# installed.

#****BusID****** "PCI:0:10:0"

#****VideoRam****256

#****Clocks******25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
****Identifier**************************"ATI Graphics Adapter"
****Driver******************************"fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor**===
****#Option******************************"NoDDC"
# === disable/enable XAA/DRI ===
****Option "no_accel"****************** "no"
****Option "no_dri"******************** "no"
# === misc DRI settings ===
****Option "mtrr"********************** "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
****Option "DesktopSetup"************** "horizontal" 
****Option "ScreenOverlap"**************"0" 
****Option "GammaCorrectionI"********** "0x00000000"
****Option "GammaCorrectionII"**********"0x00000000"
# === OpenGL specific profiles/settings ===
****Option "Capabilities"************** "0x00000000"
****Option "CapabilitiesEx"************ "0x00000000"
# === Video Overlay for the Xv extension ===
****Option "VideoOverlay"************** "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#****** will be disabled automatically
****Option "OpenGLOverlay"**************"off"
# === Center Mode (Laptops only) ===
****Option "CenterMode"**************** "off"
# === Pseudo Color Visuals (8-bit visuals) ===
****Option "PseudoColorVisuals"******** "off"
# === QBS Management ===
****Option "Stereo"******************** "off"
****Option "StereoSyncEnable"********** "1"
# === FSAA Management ===
****Option "FSAAEnable"**************** "no"
****Option "FSAAScale"******************"1"
****Option "FSAADisableGamma"********** "no"
****Option "FSAACustomizeMSPos"******** "no"
****Option "FSAAMSPosX0"****************"0.000000"
****Option "FSAAMSPosY0"****************"0.000000"
****Option "FSAAMSPosX1"****************"0.000000"
****Option "FSAAMSPosY1"****************"0.000000"
****Option "FSAAMSPosX2"****************"0.000000"
****Option "FSAAMSPosY2"****************"0.000000"
****Option "FSAAMSPosX3"****************"0.000000"
****Option "FSAAMSPosY3"****************"0.000000"
****Option "FSAAMSPosX4"****************"0.000000"
****Option "FSAAMSPosY4"****************"0.000000"
****Option "FSAAMSPosX5"****************"0.000000"
****Option "FSAAMSPosY5"****************"0.000000"
# === Misc Options ===
****Option "UseFastTLS"**************** "0"
****Option "BlockSignalsOnLock"******** "on"
****Option "UseInternalAGPGART"******** "yes"
****Option "ForceGenericCPU"************"no"
****BusID "PCI:1:0:0"****# vendor=1002, device=4e48
****Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.**Each describes
# the configuration of a single screen.**A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
****Identifier**"Screen0"
****Device******"ATI Graphics Adapter"
****Monitor**** "Monitor0"
****DefaultDepth 24
****#Option "backingstore"

****Subsection "Display"
********Depth****** 24
********Modes****** "1280x1024" "1024x768" "800x600" "640x480"
********ViewPort****0 0**# initial origin if mode is smaller than desktop
#********Virtual**** 1280 1024
****EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.**Each describes
# the way multiple screens are organised.**A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.**In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
****Identifier**"Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.**The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

****Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.**Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

****InputDevice "Mouse1" "CorePointer"
****InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

Can anybody help me on this? I modified the xorg.conf file and rebooted the system. But the system went to cmd mode directly.

Here is the modified xorg.con. Could you please tell me what's wrong with the file and what else I should do?

Thanks a lot.

------------------------------------------------
# /.../
# SaX generated X11 config file
# Created on: 2006-03-19T14:59:26-0600.
#
# Version: 7.1
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (7.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection

Section "Module"
Load "vnc"
Load "glx"
Load "type1"
Load "extmod"
Load "dbe"
Load "freetype"
Load "v4l"
EndSection

Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[2]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbRules" "xfree86"
Option "XkbVariant" "basic"
EndSection


Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "12"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech USB Receiver"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Driver "rfbmouse"
Identifier "Mouse[3]"
Option "InputFashion" "VNC"
EndSection


Section "Monitor"
DisplaySize 380 300
HorizSync 30-65
Identifier "Monitor[0]"
ModelName "SONY SDM-S93"
Option "DPMS"
VendorName "SNY"
VertRefresh 43-75
UseModes "Modes[0]"
EndSection

Section "Monitor"
Identifier "TV"
HorizSync 60
VertRefresh 30-150
EndSection

Section "Modes"
Identifier "Modes[0]"
Modeline "1280x960" 107.32 1280 1360 1496 1712 960 961 964 995
Modeline "1280x800" 104.35 1280 1360 1496 1712 800 801 804 835
Modeline "1280x800" 88.68 1280 1352 1488 1696 800 801 804 830
Modeline "1152x864" 86.70 1152 1224 1344 1536 864 865 868 896
Modeline "1280x768" 99.17 1280 1352 1488 1696 768 769 772 801
Modeline "1280x768" 84.35 1280 1344 1480 1680 768 769 772 797
Modeline "1024x768" 79.52 1024 1080 1192 1360 768 769 772 801
Modeline "1024x768" 67.48 1024 1080 1184 1344 768 769 772 797
Modeline "800x600" 47.53 800 840 920 1040 600 601 604 626
Modeline "800x600" 40.19 800 832 912 1024 600 601 604 623
Modeline "768x576" 43.52 768 800 880 992 576 577 580 601
Modeline "768x576" 37.37 768 800 880 992 576 577 580 598
Modeline "640x480" 29.84 640 664 728 816 480 481 484 501
Modeline "640x480" 25.10 640 656 720 800 480 481 484 498
EndSection

Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection

Section "Screen"
Identifier "Screen TV"
Device "Device[1]"
Monitor "TV"
Option "TVStandard" "PAL-B"
Option "TVOutFormat" "SVIDEO"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "800x600"
ViewPort 0 0
EndSubsection
EndSection

Section "Device"
BoardName "GeForce4 MX 440 with AGP8X"
BusID "1:0:0"
Driver "nvidia"
Identifier "Device[0]"
Option "rfbauth" "/root/.vnc/passwd"
Option "usevnc" "yes"
Screen 0
VendorName "NVidia"
EndSection

Section "Device"
BoardName "GeForce4 MX 440 with AGP8X"
BusID "1:0:0"
Driver "nvidia"
Identifier "Device[0]"
Option "rfbauth" "/root/.vnc/passwd"
Option "usevnc" "yes"
Screen 1
VendorName "NVidia"
Option "ConnectedMonitor" "CRT, TV"
EndSection

Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[2]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Mouse[3]" "SendCoreEvents"
Option "Clone" "off"
Option "Xinerama" "off"
Screen 0 "Screen[0]" 0 0
Screen 1 "Screen TV" leftof "Screen[0]"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

Section "Extensions"
EndSection

You miss the section "screen" for your monitor

Thanks, storm. I finally got the xorg.xonf to work for CRT and TV.

Another question. Is it possible to add another action for realplayer video types? That is, for rm and rmvb video, I can right click and select "Play on TV".

Appreciate your help.

You miss the section "screen" for your monitor
[/b]

Yes just create another .desktop file and use the commands you like.