Apache (httpd) 1.3

[quote][b]##
## httpd.conf -- Apache HTTP server configuration file
##

#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file.* It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.* They're here only as hints or reminders.* If you are unsure
# consult the online docs. You have been warned.*
#
# After this file is processed, the server will look for and process
# /srv/www/conf/srm.conf and then /srv/www/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:
#* 1. Directives that control the operation of the Apache server process as a
#* * whole (the 'global environment').
#* 2. Directives that define the parameters of the 'main' or 'default' server,
#* * which responds to requests that aren't handled by a virtual host.
#* * These directives also provide default values for the settings
#* * of all virtual hosts.
#* 3. Settings for virtual hosts, which allow Web requests to be sent to
#* * different IP addresses or hostnames and have them handled by the
#* * same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.* If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerType is either inetd, or standalone.* Inetd mode is only supported on
# Unix platforms.
#
ServerType standalone

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!* If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
ServerRoot "/srv/www"

#
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#
LockFile /var/lock/subsys/httpd/httpd.accept.lock

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile /var/run/httpd.pid

#
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this.* But if yours does (you'll know because
# this file will be* created when you run Apache) then you *must* ensure that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile /var/run/httpd.scoreboard

#
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order.* The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.*
# The commented-out values below are the built-in defaults.* You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

#
# Server-pool size regulation.* Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
#
# It does this by periodically checking how many servers are waiting
# for a request.* If there are fewer than MinSpareServers, it creates
# a new spare.* If there are more than MaxSpareServers, some of the
# spares die off.* The default values are probably OK for most sites.
#

# Note: these two values are set by SuSEconfig according to the setting of the
# HTTPD_PERFORMANCE variable in /etc/sysconfig/apache!
MinSpareServers 1
MaxSpareServers 1

#
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
#

# Note: this value is set by SuSEconfig according to the setting of the
# HTTPD_PERFORMANCE variable in /etc/sysconfig/apache!
StartServers 1

#
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#

# Note: this value is set by SuSEconfig according to the setting of the
# HTTPD_PERFORMANCE variable in /etc/sysconfig/apache!
MaxClients 150

#
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies.* The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources.* On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after the initial
#* * * request per connection. For example, if a child process handles
#* * * an initial request and 10 subsequent "keptalive" requests, it
#* * * would only count as 1 request towards this limit.
#
MaxRequestsPerChild 0

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 12.34.56.78:80

#
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Please read the file http://httpd.apache.org/docs/dso.html for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
#
# Note: The order in which modules are loaded is important.* Don't change
# the order below without expert advice.

# Note:
#
# The file that is included after the LoadModule statements is generated
# by SuSEconfig according to
#
# 1) which modules (ones not included with apache) are installed
# 2) the settings in /etc/sysconfig/apache
#
# SuSEconfig uses the /etc/httpd/modules/* files that come with each module
# to determine the necessary directives.
#
# Apache no longer needs to be started with '-D <modules>' switches (with
# the exception of mod_ssl, which has a lot of conditional statements).

# Example:
# LoadModule foo_module libexec/mod_foo.so
LoadModule mmap_static_module /usr/lib/apache/mod_mmap_static.so
LoadModule vhost_alias_module /usr/lib/apache/mod_vhost_alias.so
LoadModule env_module* * * * /usr/lib/apache/mod_env.so
LoadModule define_module* * * /usr/lib/apache/mod_define.so
LoadModule config_log_module* /usr/lib/apache/mod_log_config.so
LoadModule agent_log_module* /usr/lib/apache/mod_log_agent.so
LoadModule referer_log_module /usr/lib/apache/mod_log_referer.so
LoadModule mime_magic_module* /usr/lib/apache/mod_mime_magic.so
LoadModule mime_module* * * * /usr/lib/apache/mod_mime.so
LoadModule negotiation_module /usr/lib/apache/mod_negotiation.so
LoadModule status_module* * * /usr/lib/apache/mod_status.so
LoadModule info_module* * * * /usr/lib/apache/mod_info.so
LoadModule includes_module* * /usr/lib/apache/mod_include.so
LoadModule autoindex_module* /usr/lib/apache/mod_autoindex.so
LoadModule dir_module* * * * /usr/lib/apache/mod_dir.so
LoadModule cgi_module* * * * /usr/lib/apache/mod_cgi.so
LoadModule asis_module* * * * /usr/lib/apache/mod_asis.so
LoadModule imap_module* * * * /usr/lib/apache/mod_imap.so
LoadModule action_module* * * /usr/lib/apache/mod_actions.so
LoadModule speling_module* * /usr/lib/apache/mod_speling.so
# mod_userdir will be included below by SuSEconfig if HTTPD_SEC_PUBLIC_HTML=yes
LoadModule alias_module* * * /usr/lib/apache/mod_alias.so
LoadModule rewrite_module* * /usr/lib/apache/mod_rewrite.so
LoadModule access_module* * * /usr/lib/apache/mod_access.so
LoadModule auth_module* * * * /usr/lib/apache/mod_auth.so
LoadModule anon_auth_module* /usr/lib/apache/mod_auth_anon.so
LoadModule dbm_auth_module* * /usr/lib/apache/mod_auth_dbm.so
LoadModule db_auth_module* * /usr/lib/apache/mod_auth_db.so
LoadModule digest_module* * * /usr/lib/apache/mod_digest.so
LoadModule proxy_module* * * /usr/lib/apache/libproxy.so
LoadModule cern_meta_module* /usr/lib/apache/mod_cern_meta.so
LoadModule expires_module* * /usr/lib/apache/mod_expires.so
LoadModule headers_module* * /usr/lib/apache/mod_headers.so
LoadModule usertrack_module* /usr/lib/apache/mod_usertrack.so
# LoadModule unique_id_module* /usr/lib/apache/mod_unique_id.so
LoadModule setenvif_module* * /usr/lib/apache/mod_setenvif.so
<IfDefine DUMMYSSL>
LoadModule ssl_module* * * * /usr/lib/apache/libssl.so
</IfDefine>

Include /etc/httpd/suse_loadmodule.conf


#* Reconstruction of the complete module list from all available modules
#* (static and shared ones) to achieve correct module execution order.
#* [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
AddModule mod_mmap_static.c
AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_define.c
AddModule mod_log_config.c
AddModule mod_log_agent.c
AddModule mod_log_referer.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_speling.c
# mod_userdir will be included below by SuSEconfig if HTTPD_SEC_PUBLIC_HTML=yes
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_db.c
AddModule mod_digest.c
AddModule mod_proxy.c
AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
# AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
<IfDefine DUMMYSSL>
AddModule mod_ssl.c
</IfDefine>



# Again, the following file is generated by SuSEconfig for modules that actually
# have been installed

Include /etc/httpd/suse_addmodule.conf


#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
ExtendedStatus On


#
# To enable mod_dav, add the following directive to the appropriate
# container(s) in the httpd.conf file:
#
<IfModule mod_dav.c>
DavLockDB /var/lib/httpd/DAVLock
</IfModule>


#
#
# enable the SSI (Server Side Includes) execution for +x files
#
<IfModule mod_include.c>
XBitHack on
</IfModule>


### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.* These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
#

#
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#
Port 80

##
##* SSL Support
##
##* When we also provide SSL we have to listen to the
##* standard HTTP port (see above) and to the HTTPS port
##
<IfDefine SSL>
Listen 80
Listen 443
</IfDefine>

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.*
#
# User/Group: The name (or #number) of the user/group to run httpd as.
#* . On SCO (ODT 3) use "User nouser" and "Group nogroup".
#* . On HPUX you may not be able to use shared memory as nobody, and the
#* * suggested workaround is to create a user www and use that user.
#* NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
#* when the value of (unsigned)Group is above 60000;
#* don't use Group nogroup on these systems!
#
User wwwrun
Group nogroup

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.* This address appears on some server-generated pages, such
# as error documents.
#

# Note: this email address is set by SuSEconfig according to the setting of the
# HTTPD_SEC_SERVERADMIN variable in /etc/sysconfig/apache!
ServerAdmin webmaster@susebox.acnet

#
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
#
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
#

# Note: the host name is set by SuSEconfig according to the setting of the
# FQHOSTNAME variable in /etc/sysconfig/network/config!
ServerName susebox.acnet

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/srv/www/htdocs"

#
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# permissions.*
#
<Directory />
* * AuthUserFile* /etc/httpd/passwd
* * AuthGroupFile /etc/httpd/group

* * Options -FollowSymLinks +Multiviews
* * AllowOverride None

</Directory>


#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/srv/www/htdocs">

#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
* * Options Indexes -FollowSymLinks +Includes MultiViews

#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
#
* * AllowOverride None

#
# Controls who can get stuff from this server.
#
* * Order allow,deny
* * Allow from all


#
# disable WebDAV by default for security reasons.
#
<IfModule mod_dav.c>
DAV Off
</IfModule>

#
# Enable SSI (Server Side Includes) for the demo index.html pages, as some of the content
# is created dynamically. This should be disabled when setting up a productive
# server.
<Files /srv/www/htdocs/index.htm*>
Options -FollowSymLinks +Includes +MultiViews
</Files>

#
# Protect the php3 test page, so it cannot be viewed from an outside system.
#
<Files test.php3>
Order deny,allow
deny from all
allow from localhost
</Files>

</Directory>

#
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.

# Note:
# The next three lines are commented out here. These directives and the access
# control section have been put into /etc/httpd/suse_public_html.conf.
# If the variable HTTPD_SEC_PUBLIC_HTML in /etc/sysconfig/apache
# is set to "yes" (default), SuSEconfig will include that file via
# /etc/httpd/suse_include.conf.
# Also note that for the /home/*/public_html directories to be browsable the
# executable flag must be set on the /home/* directories.

#
# <IfModule mod_userdir.c>
#* * UserDir public_html
# </IfModule>

#
# Control access to UserDir directories.* The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
#* * AllowOverride FileInfo AuthConfig Limit
#* * Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#* * <Limit GET POST OPTIONS PROPFIND>
#* * * * Order allow,deny
#* * * * Allow from all
#* * </Limit>
#* * <LimitExcept GET POST OPTIONS PROPFIND>
#* * * * Order deny,allow
#* * * * Deny from all
#* * </LimitExcept>
#</Directory>

#
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index.* Separate multiple entries with spaces.
#
<IfModule mod_dir.c>
* * DirectoryIndex index.html
</IfModule>

#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess files from being viewed by
# Web clients.* Since .htaccess files often contain authorization
# information, access is disallowed for security reasons.* Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files.* If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^\.ht">
* * Order allow,deny
* * Deny from all
* * Satisfy All
</Files>

#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs

#
# UseCanonicalName:* (new for 1.3)* With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name.* With this setting off, Apache will
# use the hostnameort that the client supplied, when possible.* This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
<IfModule mod_mime.c>
* * TypesConfig /etc/httpd/mime.types
</IfModule>

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.* If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.* The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
* * MIMEMagicFile /etc/httpd/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off


#* The following are the directives necessary to get mod_backhand operational.
#* You will need to add Backhand directives to any directories that you wish
#* to balance..* For example, you could put the following inside a
#* ScriptAliased /cgi-cpu/ directory (for scripts that are cpu hogs)

# <Directory ...>
# ... stuff ...
# Backhand byAge
# Backhand byRandom
# Backhand byLogWindow
# Backhand byCPU
# ... stuff ...
# </Directory>

# This will eliminate servers you haven't heard from for a while
# Then randomize those remaining
# Then take the first log(n)* (log base 2 of course)
# Then use the one with the highest CPU idle time

<IfModule mod_backhand.c>
# UnixSocketDir is were the mod_backhand-Arriba file is stored
#* (how fast your machine is). This directory must be readable and writable
#* by euid of apache (wwwrun) because the children have dropped privileges
#* before they connect to a UNIX domain socket in this directory.
# This directive is singular.
#
# MulticastStats of the form [<IP ADDR>] <BROADCAST ADDR>:<PORT> will set
#* mod_backhand to broadcast server statistics on that address advertising
#* for a server on <IP ADDR> or gethostbyname(gethostname())
# MulticastStats of the form [<IP ADDR>] <MULTICAST ADDR>:<PORT>,<ttl> will
#* set mod_backhand to multicast server statistics on that address
#* advertising for a server on <IP ADDR> or gethostbyname(gethostname())
# This directive is singular.
#
# AcceptStats <a.b.c.d>[/<mask>] (like 10.0.0.4 or 10.0.0.0/24) will accept
#* statistics originating from that IP or IP network.
# This option can be cascaded.

* UnixSocketDir /var/lib/backhand
# MulticastStats 128.220.221.255:4445
# MulticastStats 225.220.221.20:4445,1
# AcceptStats 128.220.221.0/24

# Note that you _must_ configure the MulticastStats/AcceptStats directives,
# otherwise apache will segfault!

# This is a status of sorts.* Visit it and see how valuable it is to you.
* <Location "/backhand/">
* * SetHandler backhand-handler
* </Location>
</IfModule>


#
# working directory of mod_bandwidth
#
<IfModule mod_bandwidth.c>
* * BandWidthDataDir /var/lib/httpd/mod_bandwidth
</IfModule>


#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.* If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/httpd/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.* Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog /var/log/httpd/access_log common

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog /var/log/httpd/referer_log referer
#CustomLog /var/log/httpd/agent_log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog /var/log/httpd/access_log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:* On | Off | EMail
#

# Note: this is set by SuSEconfig according to the setting of the
# HTTPD_SEC_SAY_FULLNAME variable in /etc/sysconfig/apache!
ServerSignature On


# EBCDIC configuration:
# (only for mainframes using the EBCDIC codeset, currently one of:
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
# The following default configuration assumes that "text files"
# are stored in EBCDIC (so that you can operate on them using the
# normal POSIX tools like grep and sort) while "binary files" are
# stored with identical octets as on an ASCII machine.
#
# The directives are evaluated in configuration file order, with
# the EBCDICConvert directives applied before EBCDICConvertByType.
#
# If you want to have ASCII HTML documents and EBCDIC HTML documents
# at the same time, you can use the file extension to force
# conversion off for the ASCII documents:
# > AddType* * * text/html .ahtml
# > EBCDICConvert Off=InOut .ahtml
#
# EBCDICConvertByType* On=InOut text/* message/* multipart/*
# EBCDICConvertByType* On=In* * application/x-www-form-urlencoded
# EBCDICConvertByType* On=InOut application/postscript model/vrml
# EBCDICConvertByType Off=InOut */*


#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
<IfModule mod_alias.c>

* * #
* * # Note that if you include a trailing / on fakename then the server will
* * # require it to be present in the URL.* So "/icons" isn't aliased in this
* * # example, only "/icons/".* If the fakename is slash-terminated, then the
* * # realname must also be slash terminated, and if the fakename omits the
* * # trailing slash, the realname must also omit it.
* * #
* * Alias /icons/ "/srv/www/icons/"

* * <Directory "/srv/www/icons">
* * * * Options Indexes MultiViews
* * * * AllowOverride None
* * * * Order allow,deny
* * * * Allow from all
* * </Directory>

* * # This Alias will project the on-line documentation tree under /manual/
* * # even if you change the DocumentRoot. Comment it if you don't want to
* * # provide access to the on-line documentation.
* * #
* * Alias /manual/ "/srv/www/htdocs/manual/"

* * <Directory "/srv/www/htdocs/manual">
* * * * Options Indexes FollowSymlinks MultiViews
* * * * AllowOverride None
* * * * Order allow,deny
* * * * Allow from all
* * </Directory>

* * #
* * # ScriptAlias: This controls which directories contain server scripts.
* * # ScriptAliases are essentially the same as Aliases, except that
* * # documents in the realname directory are treated as applications and
* * # run by the server when requested rather than as documents sent to the client.
* * # The same rules about trailing "/" apply to ScriptAlias directives as to
* * # Alias.
* * #
* * ScriptAlias /cgi-bin/ "/srv/www/cgi-bin/"

<IfModule mod_perl.c>
* * # Provide two aliases to the same cgi-bin directory,
* * # to see the effects of the 2 different mod_perl modes.
* * # for Apache::Registry Mode
* * ScriptAlias /perl/* * * * * "/srv/www/cgi-bin/"
* * # for Apache:erlrun Mode
* * ScriptAlias /cgi-perl/* * * "/srv/www/cgi-bin/"
</IfModule>
* * #
* * # "/srv/www/cgi-bin" should be changed to whatever your ScriptAliased
* * # CGI directory exists, if you have that configured.
* * #
* * <Directory "/srv/www/cgi-bin">
* * * * AllowOverride None
* * * * Options None
* * * * Order allow,deny
* * * * Allow from all
* * </Directory>

</IfModule>
# End of aliases.


#
# set /cgi-bin for CGI execution
#
<Location /cgi-bin>
AllowOverride None
Options +ExecCGI -Includes
SetHandler cgi-script
</Location>

#
# If mod_perl is activated, load configuration information
#
<IfModule mod_perl.c>
Perlrequire /usr/include/apache/modules/perl/startup.perl
PerlModule Apache::Registry

#
# set Apache::Registry Mode for /perl Alias
#
<Location /perl>
SetHandler* perl-script
PerlHandler Apache::Registry
Options ExecCGI
PerlSendHeader On
</Location>

#
# set Apache:erlRun Mode for /cgi-perl Alias
#
<Location /cgi-perl>
SetHandler* perl-script
PerlHandler Apache:erlRun
Options ExecCGI
PerlSendHeader On
</Location>

</IfModule>



#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#

#
# Directives controlling the display of server-generated directory listings.
#
<IfModule mod_autoindex.c>

* * #
* * # FancyIndexing is whether you want fancy directory indexing or standard
* * #
* * IndexOptions FancyIndexing

* * #
* * # AddIcon* directives tell the server which icon to show for different
* * # files or filename extensions.* These are only displayed for
* * # FancyIndexed directories.
* * #
* * AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

* * AddIconByType (TXT,/icons/text.gif) text/*
* * AddIconByType (IMG,/icons/image2.gif) image/*
* * AddIconByType (SND,/icons/sound2.gif) audio/*
* * AddIconByType (VID,/icons/movie.gif) video/*

* * AddIcon /icons/binary.gif .bin .exe
* * AddIcon /icons/binhex.gif .hqx
* * AddIcon /icons/tar.gif .tar
* * AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
* * AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
* * AddIcon /icons/a.gif .ps .ai .eps
* * AddIcon /icons/layout.gif .html .shtml .htm .pdf
* * AddIcon /icons/text.gif .txt
* * AddIcon /icons/c.gif .c
* * AddIcon /icons/p.gif .pl .py
* * AddIcon /icons/f.gif .for
* * AddIcon /icons/dvi.gif .dvi
* * AddIcon /icons/uuencoded.gif .uu
* * AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
* * AddIcon /icons/tex.gif .tex
* * AddIcon /icons/bomb.gif core

* * AddIcon /icons/back.gif ..
* * AddIcon /icons/hand.right.gif README
* * AddIcon /icons/folder.gif ^^DIRECTORY^^
* * AddIcon /icons/blank.gif ^^BLANKICON^^

* * #
* * # DefaultIcon is which icon to show for files which do not have an icon
* * # explicitly set.
* * #
* * DefaultIcon /icons/unknown.gif

* * #
* * # AddDescription allows you to place a short description after a file in
* * # server-generated indexes.* These are only displayed for FancyIndexed
* * # directories.
* * # Format: AddDescription "description" filename
* * #
* * AddDescription "GZIP compressed document" .gz
* * AddDescription "tar archive" .tar
* * AddDescription "GZIP compressed tar archive" .tgz

* * #
* * # ReadmeName is the name of the README file the server will look for by
* * # default, and append to directory listings.
* * #
* * # HeaderName is the name of a file which should be prepended to
* * # directory indexes.
* * #
* * # If MultiViews are amongst the Options in effect, the server will
* * # first look for name.html and include it if found.* If name.html
* * # doesn't exist, the server will then look for name.txt and include
* * # it as plaintext if found.
* * #
* * ReadmeName README
* * HeaderName HEADER

* * #
* * # IndexIgnore is a set of filenames which directory indexing should ignore
* * # and not include in the listing.* Shell-style wildcarding is permitted.
* * #
* * IndexIgnore .??* *~ *#* RCS CVS *,v *,t

</IfModule>
# End of indexing directives.

#
# Document types.
#
<IfModule mod_mime.c>

* * #
* * # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
* * # information on the fly. Note: Not all browsers support this.
* * # Despite the name similarity, the following Add* directives have nothing
* * # to do with the FancyIndexing customization directives above.
* * #
* * AddEncoding x-compress Z
* * AddEncoding x-gzip gz tgz

* * #
* * # AddLanguage allows you to specify the language of a document. You can
* * # then use content negotiation to give a browser a file in a language
* * # it can understand.*
* * #
* * # Note 1: The suffix does not have to be the same as the language
* * # keyword --- those with documents in Polish (whose net-standard
* * # language code is pl) may wish to use "AddLanguage pl .po" to
* * # avoid the ambiguity with the common suffix for perl scripts.
* * #
* * # Note 2: The example entries below illustrate that in quite
* * # some cases the two character 'Language' abbreviation is not
* * # identical to the two character 'Country' code for its country,
* * # E.g. 'Danmark/dk' versus 'Danish/da'.
* * #
* * # Note 3: In the case of 'ltz' we violate the RFC by using a three char
* * # specifier. But there is 'work in progress' to fix this and get
* * # the reference data for rfc1766 cleaned up.
* * #
* * # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
* * # French (fr) - German (de) - Greek-Modern (el)
* * # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
* * # Portugese (pt) - Luxembourgeois* (ltz)
* * # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
* * # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
* * # Russian (ru)
* * #
* * AddLanguage da .dk
* * AddLanguage nl .nl
* * AddLanguage en .en
* * AddLanguage et .ee
* * AddLanguage fr .fr
* * AddLanguage de .de
* * AddLanguage el .el
* * AddLanguage he .he
* * AddCharset ISO-8859-8 .iso8859-8
* * AddLanguage it .it
* * AddLanguage ja .ja
* * AddCharset ISO-2022-JP .jis
* * AddLanguage kr .kr
* * AddCharset ISO-2022-KR .iso-kr
* * AddLanguage nn .nn
* * AddLanguage no .no
* * AddLanguage pl .po
* * AddCharset ISO-8859-2 .iso-pl
* * AddLanguage pt .pt
* * AddLanguage pt-br .pt-br
* * AddLanguage ltz .lu
* * AddLanguage ca .ca
* * AddLanguage es .es
* * AddLanguage sv .sv
* * AddLanguage cz .cz
* * AddLanguage ru .ru
* * AddLanguage zh-tw .tw
* * AddLanguage tw .tw
* * AddCharset Big5* * * * .Big5* * .big5
* * AddCharset WINDOWS-1251 .cp-1251
* * AddCharset CP866* * * * .cp866
* * AddCharset ISO-8859-5* .iso-ru
* * AddCharset KOI8-R* * * .koi8-r
* * AddCharset UCS-2* * * * .ucs2
* * AddCharset UCS-4* * * * .ucs4
* * AddCharset UTF-8* * * * .utf8

* * # LanguagePriority allows you to give precedence to some languages
* * # in case of a tie during content negotiation.
* * #
* * # Just list the languages in decreasing order of preference. We have
* * # more or less alphabetized them here. You probably want to change this.
* * #
* * <IfModule mod_negotiation.c>
* * * * LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
* * </IfModule>

* * #
* * # AddType allows you to tweak mime.types without actually editing it, or to
* * # make certain files to be certain types.
* * #
* * AddType application/x-tar .tgz
* * AddType image/x-icon .ico

* * # Some more types:

* * #
* * # PHP 3.x:
* * #
* * <IfModule mod_php3.c>
* * AddType application/x-httpd-php3 .php3
* * AddType application/x-httpd-php3-source .phps
* * AddType application/x-httpd-php3 .phtml
* * </IfModule>

* * #
* * # PHP 4.x:
* * #
* * <IfModule mod_php4.c>
* * AddType application/x-httpd-php .php
* * AddType application/x-httpd-php .php4
* * AddType application/x-httpd-php-source .phps
* * </IfModule>

* * #
* * # mod_dtcl can execute tcl scripts
* * #
* * <IfModule mod_dtcl.c>
* * AddType application/x-httpd-tcl .ttml
* * AddType application/x-dtcl-tcl* .tcl
* * </IfModule>

* * AddType text/vnd.wap.wml wml
* * AddType text/vnd.wap.wmlscript wmls
* * AddType application/vnd.wap.wmlc wmlc
* * AddType application/vnd.wap.wmlscriptc wmlsc
* * Addtype image/vnd.wap.wbmp wbmp
* * #
* * # AddHandler allows you to map certain file extensions to "handlers",
* * # actions unrelated to filetype. These can be either built into the server
* * # or added with the Action command (see below)
* * #
* * # If you want to use server side includes, or CGI outside
* * # ScriptAliased directories, uncomment the following lines.
* * #
* * # To use CGI scripts:
* * #
* * AddHandler cgi-script .cgi

* * #
* * # To use server-parsed HTML files
* * #
* * AddType text/html .shtml
* * AddHandler server-parsed .shtml

* * #
* * # Uncomment the following line to enable Apache's send-asis HTTP file
* * # feature
* * #
* * #AddHandler send-as-is asis

* * #
* * # If you wish to use server-parsed imagemap files, use
* * #
* * #AddHandler imap-file map

* * #
* * # To enable type maps, you might want to use
* * #
* * #AddHandler type-map var

</IfModule>
# End of document types.

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web

#
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#
#MetaSuffix .meta

#
# Customizable error response (Apache style)
#* these come in three flavors
#
#* * 1) plain text
#ErrorDocument 500 "The server made a boo boo.
#* n.b.* the single leading (") marks it as text, it does not get output
#
#* * 2) local redirects
#ErrorDocument 404 /missing.html
#* to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
#* N.B.: You can redirect to a script or a document using server-side-includes.
#
#* * 3) external redirects
#ErrorDocument 402 http://some.other-server.com/subscription_info.html
#* N.B.: Many of the environment variables associated with the original
#* request will *not* be available to such a script.

#
# Customize behaviour based on the browser
#
<IfModule mod_setenvif.c>

* * #
* * # The following directives modify normal HTTP response behavior.
* * # The first directive disables keepalive for Netscape 2.x and browsers that
* * # spoof it. There are known problems with these browser implementations.
* * # The second directive is for Microsoft Internet Explorer 4.0b2
* * # which has a broken HTTP/1.1 implementation and does not properly
* * # support keepalive when it is used on 301 or 302 (redirect) responses.
* * #
* * BrowserMatch "Mozilla/2" nokeepalive
* * BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0

* * #
* * # The following directive disables HTTP/1.1 responses to browsers which
* * # are in violation of the HTTP/1.0 spec by not being able to grok a
* * # basic 1.1 response.
* * #
* * BrowserMatch "RealPlayer 4\.0" force-response-1.0
* * BrowserMatch "Java/1\.0" force-response-1.0
* * BrowserMatch "JDK/1\.0" force-response-1.0

</IfModule>
# End of browser customization directives

#
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your-domain.com" to match your domain to enable.
#
# Note: apache is started (by /etc/init.d/apache) with -D STATUS if
# HTTPD_SEC_ACCESS_SERVERINFO is set to "yes" in
# /etc/sysconfig/apache.

<IfDefine STATUS>
<Location /server-status>
* * SetHandler server-status
* * Order deny,allow
* * Deny from all
* * Allow from localhost
</Location>

#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your-domain.com" to match your domain to enable.
#
<Location /server-info>
* * SetHandler server-info
* * Order deny,allow
* * Deny from all
* * Allow from localhost
</Location>

#
# enable perl-status for mod_perl
#
<IfModule mod_perl.c>
<Location /perl-status>
* * SetHandler perl-script
* * PerlHandler Apache::Status
* * order deny,allow
* * deny from all
* * allow from localhost
</Location>
</IfModule>
</IfDefine>


#
# There have been reports of people trying to abuse an old bug from pre-1.1
# days.* This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org.* Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
#* * Deny from all
#* * ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#* * ProxyRequests On

#* * <Directory proxy:*>
#* * * * Order deny,allow
#* * * * Deny from all
#* * * * Allow from .your-domain.com
#* * </Directory>

* * #
* * # Enable/disable the handling of HTTP/1.1 "Via:" headers.
* * # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
* * # Set to one of: Off | On | Full | Block
* * #
#* * ProxyVia On

* * #
* * # To enable the cache as well, edit and uncomment the following lines:
* * # (no cacheing without CacheRoot)
* * #
#* * CacheRoot "/var/cache/httpd"
#* * CacheSize 5
#* * CacheGcInterval 4
#* * CacheMaxExpire 24
#* * CacheLastModifiedFactor 0.1
#* * CacheDefaultExpire 1
#* * NoCache a-domain.com another-domain.edu joes.garage-sale.com

#</IfModule>
# End of proxy directives.

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *>
#* * ServerAdmin webmaster@dummy-host.example.com
#* * DocumentRoot /www/docs/dummy-host.example.com
#* * ServerName dummy-host.example.com
#* * ErrorLog logs/dummy-host.example.com-error_log
#* * CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>

#<VirtualHost _default_:*>
#</VirtualHost>

##
##* SSL Global Context
##
##* All SSL configuration in this context applies both to
##* the main server and all SSL-enabled virtual hosts.
##

#
#* Some MIME-types for downloading Certificates and CRLs
#
<IfDefine SSL>
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl* * .crl
</IfDefine>

<IfModule mod_ssl.c>

#* Pass Phrase Dialog:
#* Configure the pass phrase gathering process.
#* The filtering dialog program (`builtin' is a internal
#* terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog* builtin

#* Inter-Process Session Cache:
#* Configure the SSL Session Cache: First the mechanism
#* to use and second the expiring timeout (in seconds, default=300).
#* shm means the same as shmht.
#* Note that on most platforms shared memory segments are not allowed to be on
#* network-mounted drives, so in that case you need to use the dbm method.
#SSLSessionCache* * * * none
#SSLSessionCache* * * * shmht:/var/run/ssl_scache(512000)
#SSLSessionCache* * * * shmcb:/var/run/ssl_scache(512000)
#SSLSessionCache* * * * dbm:/var/run/ssl_scache
SSLSessionCache* * * * shmcb:/var/lib/httpd/ssl_scache
SSLSessionCacheTimeout* 600

#* Semaphore:
#* Configure the path to the mutual exclusion semaphore the
#* SSL engine uses internally for inter-process synchronization.
#SSLMutex* file:/var/run/ssl_mutex
SSLMutex* sem

#* Pseudo Random Number Generator (PRNG):
#* Configure one or more sources to seed the PRNG of the
#* SSL library. The seed data should be of good random quality.
#* WARNING! On some platforms /dev/random blocks if not enough entropy
#* is available. This means you then cannot use the /dev/random device
#* because it would lead to very long connection times (as long as
#* it requires to make more entropy available). But usually those
#* platforms additionally provide a /dev/urandom device which doesn't
#* block. So, if available, use this one instead. Read the mod_ssl User
#* Manual for more details.
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random* 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random* 512
#SSLRandomSeed connect file:/dev/urandom 512

#* Logging:
#* The home of the dedicated SSL protocol logfile. Errors are
#* additionally duplicated in the general error log file.* Put
#* this somewhere where it cannot be used for symlink attacks on
#* a real server (i.e. somewhere where only root can write).
#* Log levels are (ascending order: higher ones include lower ones):
#* none, error, warn, info, trace, debug.
SSLLog* * * /var/log/httpd/ssl_engine_log
SSLLogLevel info

</IfModule>

<IfDefine SSL>

##
## SSL Virtual Host Context
##

<VirtualHost _default_:443>

#* General setup for the virtual host
DocumentRoot "/srv/www/htdocs"
ServerName new.host.name
ServerAdmin you@your.address
ErrorLog /var/log/httpd/error_log
TransferLog /var/log/httpd/access_log

#* SSL Engine Switch:
#* Enable/Disable SSL for this virtual host.
SSLEngine on

#* SSL Cipher Suite:
#* List the ciphers that the client is permitted to negotiate.
#* See the mod_ssl documentation for a complete list.
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSL v2:+EXP:+eNULL

#* Server Certificate:
#* Point SSLCertificateFile at a PEM encoded certificate.* If
#* the certificate is encrypted, then you will be prompted for a
#* pass phrase.* Note that a kill -HUP will prompt again. A test
#* certificate can be generated with `make certificate' under
#* built time. Keep in mind that if you've both a RSA and a DSA
#* certificate you can configure both in parallel (to also allow
#* the use of DSA ciphers, etc.)
SSLCertificateFile /etc/httpd/ssl.crt/server.crt
#SSLCertificateFile /etc/httpd/ssl.crt/server-dsa.crt

#* Server Private Key:
#* If the key is not combined with the certificate, use this
#* directive to point at the key file.* Keep in mind that if
#* you've both a RSA and a DSA private key you can configure
#* both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/httpd/ssl.key/server.key
#SSLCertificateKeyFile /etc/httpd/ssl.key/server-dsa.key

#* Server Certificate Chain:
#* Point SSLCertificateChainFile at a file containing the
#* concatenation of PEM encoded CA certificates which form the
#* certificate chain for the server certificate. Alternatively
#* the referenced file can be the same as SSLCertificateFile
#* when the CA certificates are directly appended to the server
#* certificate for convinience.
#SSLCertificateChainFile /etc/httpd/ssl.crt/ca.crt

#* Certificate Authority (CA):
#* Set the CA certificate verification path where to find CA
#* certificates for client authentication or alternatively one
#* huge file containing all of them (file must be PEM encoded)
#* Note: Inside SSLCACertificatePath you need hash symlinks
#* * * * to point to the certificate files. Use the provided
#* * * * Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/httpd/ssl.crt
#SSLCACertificateFile /etc/httpd/ssl.crt/ca-bundle.crt

#* Certificate Revocation Lists (CRL):
#* Set the CA revocation path where to find CA CRLs for client
#* authentication or alternatively one huge file containing all
#* of them (file must be PEM encoded)
#* Note: Inside SSLCARevocationPath you need hash symlinks
#* * * * to point to the certificate files. Use the provided
#* * * * Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/httpd/ssl.crl
#SSLCARevocationFile /etc/httpd/ssl.crl/ca-bundle.crl

#* Client Authentication (Type):
#* Client certificate verification type and depth.* Types are
#* none, optional, require and optional_no_ca.* Depth is a
#* number which specifies how deeply to verify the certificate
#* issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth* 10

#* Access Control:
#* With SSLRequire you can do per-directory access control based
#* on arbitrary complex boolean expressions containing server
#* variable checks and other lookup directives.* The syntax is a
#* mixture between C and Perl.* See the mod_ssl documentation
#* for more details.
#<Location />
#SSLRequire (* * %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
#* * * * * * and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
#* * * * * * and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
#* * * * * * and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
#* * * * * * and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20* * * ) \
#* * * * * or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

#* SSL Engine Options:
#* Set various options for the SSL engine.
#* o FakeBasicAuth:
#* * Translate the client X.509 into a Basic Authorisation.* This means that
#* * the standard Auth/DBMAuth methods can be used for access control.* The
#* * user name is the `one line' version of the client's X.509 certificate.
#* * Note that no password is obtained from the user. Every entry in the user
#* * file needs this password: `xxj31ZMTZzkVA'.
#* o ExportCertData:
#* * This exports two additional environment variables: SSL_CLIENT_CERT and
#* * SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#* * server (always existing) and the client (only existing when client
#* * authentication is used). This can be used to import the certificates
#* * into CGI scripts.
#* o StdEnvVars:
#* * This exports the standard SSL/TLS related `SSL_*' environment variables.
#* * Per default this exportation is switched off for performance reasons,
#* * because the extraction step is an expensive ope

... add a virtual hosts, put it in httpd.conf:

------------------------------------------------------------------------------------------
<VirtualHost www.yourvirtualsite.net>
ServerName yourvirtualsite.net
NameVirtualHost 222.111.222.111
ServerAdmin webmaster@yourvirtualsite.net
DocumentRoot /www/yourvirtualsite.net/htdocs
CustomLog /www/yourvirtualsite.net/logs/access_log combined
ErrorLog /www/yourvirtualsite.net/logs/error_log
ErrorDocument 404 /error/404.html
ScriptAlias /cgi-bin/ "/www/yourvirtualsite.net/cgi-bin/"
</VirtualHost>


<VirtualHost yourvirtualsite.com>
ServerName yourvirtualsite.com
ServerAdmin webmaster@yourvirtualsite.com
DocumentRoot /www/yourvirtualsite.com/htdocs
CustomLog /www/yourvirtualsite.com/logs/access_log combined
ErrorLog /www/yourvirtualsite.com/logs/error_log
ErrorDocument 404 /error/404.html
ScriptAlias /cgi-bin/ "/www/yourvirtualsite.com/cgi-bin/"
</VirtualHost>
------------------------------------------------------------------------------------------

Notes:
1. The secound virtual host dont need a NameVirtualHost parameter...
2. I use combined logs to Awstats analyze...
3. Put your correct directory and domains in conf...

...and Have a lot of Fun

I know this is an odd request but can someone post just the plain unconfigured httpd.conf file for apache?

Originally posted by sarvinc@Dec 31 2004, 09:37
I know this is an odd request but can someone post just the plain unconfigured httpd.conf file for apache?

#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file. *It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. *They're here only as hints or reminders. *If you are unsure
# consult the online docs. You have been warned. *
#
# After this file is processed, the server will look for and process
# conf/srm.conf and then conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:
# *1. Directives that control the operation of the Apache server process as a
# * * whole (the 'global environment').
# *2. Directives that define the parameters of the 'main' or 'default' server,
# * * which responds to requests that aren't handled by a virtual host.
# * * These directives also provide default values for the settings
# * * of all virtual hosts.
# *3. Settings for virtual hosts, which allow Web requests to be sent to
# * * different IP addresses or hostnames and have them handled by the
# * * same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. *If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerType is either inetd, or standalone. *Inetd mode is only supported on
# Unix platforms.
#
ServerType standalone

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! *If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
ServerRoot "@@ServerRoot@@"

#
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename. 
#
#LockFile logs/accept.lock

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile logs/httpd.pid

#
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. *But if yours does (you'll know because
# this file will be *created when you run Apache) then you *must* ensure that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile logs/apache_runtime_status

#
# In the standard configuration, the server will process httpd.conf (this 
# file, specified by the -f command line option), srm.conf, and access.conf 
# in that order. *The latter two files are now distributed empty, as it is 
# recommended that all directives be kept in a single file for simplicity. *
# The commented-out values below are the built-in defaults. *You can have the 
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

#
# Server-pool size regulation. *Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
#
# It does this by periodically checking how many servers are waiting
# for a request. *If there are fewer than MinSpareServers, it creates
# a new spare. *If there are more than MaxSpareServers, some of the
# spares die off. *The default values are probably OK for most sites.
#
MinSpareServers 5
MaxSpareServers 10

#
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
#
StartServers 5

#
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#
MaxClients 150

#
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. *The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. *On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after the initial
# * * * request per connection. For example, if a child process handles
# * * * an initial request and 10 subsequent "keptalive" requests, it
# * * * would only count as 1 request towards this limit.
#
MaxRequestsPerChild 0

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 12.34.56.78:80

#
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Please read the file http://httpd.apache.org/docs/dso.html for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
#
# Note: The order in which modules are loaded is important. *Don't change
# the order below without expert advice.
#
# Example:
# LoadModule foo_module libexec/mod_foo.so

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. *These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
#

#
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#
Port 80

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch. *
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# *. On SCO (ODT 3) use "User nouser" and "Group nogroup".
# *. On HPUX you may not be able to use shared memory as nobody, and the
# * *suggested workaround is to create a user www and use that user.
# *NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# *when the value of (unsigned)Group is above 60000; 
# *don't use Group "#-1" on these systems!
#
User nobody
Group "#-1"

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. *This address appears on some server-generated pages, such
# as error documents.
#
ServerAdmin you@your.address

#
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name you 
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
#
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your 
# machine always knows itself by this address. If you use Apache strictly for 
# local testing and development, you may use 127.0.0.1 as the server name.
#
#ServerName www.example.com

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "@@ServerRoot@@/htdocs"

#
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# permissions. *
#
<Directory />
 * *Options FollowSymLinks
 * *AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "@@ServerRoot@@/htdocs">

#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
 * *Options Indexes FollowSymLinks MultiViews

#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo", 
# "AuthConfig", and "Limit"
#
 * *AllowOverride None

#
# Controls who can get stuff from this server.
#
 * *Order allow,deny
 * *Allow from all
</Directory>

#
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
#
<IfModule mod_userdir.c>
 * *UserDir public_html
</IfModule>

#
# Control access to UserDir directories. *The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
# * *AllowOverride FileInfo AuthConfig Limit
# * *Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# * *<Limit GET POST OPTIONS PROPFIND>
# * * * *Order allow,deny
# * * * *Allow from all
# * *</Limit>
# * *<LimitExcept GET POST OPTIONS PROPFIND>
# * * * *Order deny,allow
# * * * *Deny from all
# * *</LimitExcept>
#</Directory>

#
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. *Separate multiple entries with spaces.
#
<IfModule mod_dir.c>
 * *DirectoryIndex index.html
</IfModule>

#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess files from being viewed by
# Web clients. *Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. *Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. *If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^\.ht">
 * *Order allow,deny
 * *Deny from all
 * *Satisfy All
</Files>

#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs

#
# UseCanonicalName: *(new for 1.3) *With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. *With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. *This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
<IfModule mod_mime.c>
 * *TypesConfig conf/mime.types
</IfModule>

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. *If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. *The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
 * *MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. *If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. *Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog logs/access_log common

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access_log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: *On | Off | EMail
#
ServerSignature On

# EBCDIC configuration:
# (only for mainframes using the EBCDIC codeset, currently one of:
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
# The following default configuration assumes that "text files"
# are stored in EBCDIC (so that you can operate on them using the
# normal POSIX tools like grep and sort) while "binary files" are
# stored with identical octets as on an ASCII machine.
#
# The directives are evaluated in configuration file order, with
# the EBCDICConvert directives applied before EBCDICConvertByType.
#
# If you want to have ASCII HTML documents and EBCDIC HTML documents
# at the same time, you can use the file extension to force
# conversion off for the ASCII documents:
# > AddType * * * text/html .ahtml
# > EBCDICConvert Off=InOut .ahtml
#
# EBCDICConvertByType *On=InOut text/* message/* multipart/*
# EBCDICConvertByType *On=In * *application/x-www-form-urlencoded
# EBCDICConvertByType *On=InOut application/postscript model/vrml
# EBCDICConvertByType Off=InOut */*


#
# Aliases: Add here as many aliases as you need (with no limit). The format is 
# Alias fakename realname
#
<IfModule mod_alias.c>

 * *#
 * *# Note that if you include a trailing / on fakename then the server will
 * *# require it to be present in the URL. *So "/icons" isn't aliased in this
 * *# example, only "/icons/". *If the fakename is slash-terminated, then the 
 * *# realname must also be slash terminated, and if the fakename omits the 
 * *# trailing slash, the realname must also omit it.
 * *#
 * *Alias /icons/ "@@ServerRoot@@/icons/"

 * *<Directory "@@ServerRoot@@/icons">
 * * * *Options Indexes MultiViews
 * * * *AllowOverride None
 * * * *Order allow,deny
 * * * *Allow from all
 * *</Directory>

 * *# This Alias will project the on-line documentation tree under /manual/
 * *# even if you change the DocumentRoot. Comment it if you don't want to 
 * *# provide access to the on-line documentation.
 * *#
 * *Alias /manual/ "@@ServerRoot@@/htdocs/manual/"

 * *<Directory "@@ServerRoot@@/htdocs/manual">
 * * * *Options Indexes FollowSymlinks MultiViews
 * * * *AllowOverride None
 * * * *Order allow,deny
 * * * *Allow from all
 * *</Directory>

 * *#
 * *# ScriptAlias: This controls which directories contain server scripts.
 * *# ScriptAliases are essentially the same as Aliases, except that
 * *# documents in the realname directory are treated as applications and
 * *# run by the server when requested rather than as documents sent to the client.
 * *# The same rules about trailing "/" apply to ScriptAlias directives as to
 * *# Alias.
 * *#
 * *ScriptAlias /cgi-bin/ "@@ServerRoot@@/cgi-bin/"

 * *#
 * *# "@@ServerRoot@@/cgi-bin" should be changed to whatever your ScriptAliased
 * *# CGI directory exists, if you have that configured.
 * *#
 * *<Directory "@@ServerRoot@@/cgi-bin">
 * * * *AllowOverride None
 * * * *Options None
 * * * *Order allow,deny
 * * * *Allow from all
 * *</Directory>

</IfModule>
# End of aliases.

#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#

#
# Directives controlling the display of server-generated directory listings.
#
<IfModule mod_autoindex.c>

 * *#
 * *# FancyIndexing is whether you want fancy directory indexing or standard
 * *#
 * *IndexOptions FancyIndexing

 * *#
 * *# AddIcon* directives tell the server which icon to show for different
 * *# files or filename extensions. *These are only displayed for
 * *# FancyIndexed directories.
 * *#
 * *AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

 * *AddIconByType (TXT,/icons/text.gif) text/*
 * *AddIconByType (IMG,/icons/image2.gif) image/*
 * *AddIconByType (SND,/icons/sound2.gif) audio/*
 * *AddIconByType (VID,/icons/movie.gif) video/*

 * *AddIcon /icons/binary.gif .bin .exe
 * *AddIcon /icons/binhex.gif .hqx
 * *AddIcon /icons/tar.gif .tar
 * *AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
 * *AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
 * *AddIcon /icons/a.gif .ps .ai .eps
 * *AddIcon /icons/layout.gif .html .shtml .htm .pdf
 * *AddIcon /icons/text.gif .txt
 * *AddIcon /icons/c.gif .c
 * *AddIcon /icons/p.gif .pl .py
 * *AddIcon /icons/f.gif .for
 * *AddIcon /icons/dvi.gif .dvi
 * *AddIcon /icons/uuencoded.gif .uu
 * *AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
 * *AddIcon /icons/tex.gif .tex
 * *AddIcon /icons/bomb.gif core

 * *AddIcon /icons/back.gif ..
 * *AddIcon /icons/hand.right.gif README
 * *AddIcon /icons/folder.gif ^^DIRECTORY^^
 * *AddIcon /icons/blank.gif ^^BLANKICON^^

 * *#
 * *# DefaultIcon is which icon to show for files which do not have an icon
 * *# explicitly set.
 * *#
 * *DefaultIcon /icons/unknown.gif

 * *#
 * *# AddDescription allows you to place a short description after a file in
 * *# server-generated indexes. *These are only displayed for FancyIndexed
 * *# directories.
 * *# Format: AddDescription "description" filename
 * *#
 * *#AddDescription "GZIP compressed document" .gz
 * *#AddDescription "tar archive" .tar
 * *#AddDescription "GZIP compressed tar archive" .tgz

 * *#
 * *# ReadmeName is the name of the README file the server will look for by
 * *# default, and append to directory listings.
 * *#
 * *# HeaderName is the name of a file which should be prepended to
 * *# directory indexes. 
 * *#
 * *ReadmeName README.html
 * *HeaderName HEADER.html

 * *#
 * *# IndexIgnore is a set of filenames which directory indexing should ignore
 * *# and not include in the listing. *Shell-style wildcarding is permitted.
 * *#
 * *IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

</IfModule>
# End of indexing directives.

#
# Document types.
#
<IfModule mod_mime.c>

 * *#
 * *# AddLanguage allows you to specify the language of a document. You can
 * *# then use content negotiation to give a browser a file in a language
 * *# it can understand. *
 * *#
 * *# Note 1: The suffix does not have to be the same as the language 
 * *# keyword --- those with documents in Polish (whose net-standard 
 * *# language code is pl) may wish to use "AddLanguage pl .po" to 
 * *# avoid the ambiguity with the common suffix for perl scripts.
 * *#
 * *# Note 2: The example entries below illustrate that in quite
 * *# some cases the two character 'Language' abbreviation is not
 * *# identical to the two character 'Country' code for its country,
 * *# E.g. 'Danmark/dk' versus 'Danish/da'.
 * *#
 * *# Note 3: In the case of 'ltz' we violate the RFC by using a three char 
 * *# specifier. But there is 'work in progress' to fix this and get 
 * *# the reference data for rfc1766 cleaned up.
 * *#
 * *# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
 * *# French (fr) - German (de) - Greek-Modern (el)
 * *# Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
 * *# Portugese (pt) - Luxembourgeois* (ltz)
 * *# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
 * *# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
 * *# Russian (ru)
 * *#
 * *AddLanguage da .dk
 * *AddLanguage nl .nl
 * *AddLanguage en .en
 * *AddLanguage et .ee
 * *AddLanguage fr .fr
 * *AddLanguage de .de
 * *AddLanguage el .el
 * *AddLanguage he .he
 * *AddCharset ISO-8859-8 .iso8859-8
 * *AddLanguage it .it
 * *AddLanguage ja .ja
 * *AddCharset ISO-2022-JP .jis
 * *AddLanguage kr .kr
 * *AddCharset ISO-2022-KR .iso-kr
 * *AddLanguage nn .nn
 * *AddLanguage no .no
 * *AddLanguage pl .po
 * *AddCharset ISO-8859-2 .iso-pl
 * *AddLanguage pt .pt
 * *AddLanguage pt-br .pt-br
 * *AddLanguage ltz .lu
 * *AddLanguage ca .ca
 * *AddLanguage es .es
 * *AddLanguage sv .sv
 * *AddLanguage cs .cz .cs
 * *AddLanguage ru .ru
 * *AddLanguage zh-TW .zh-tw
 * *AddCharset Big5 * * * * .Big5 * *.big5
 * *AddCharset WINDOWS-1251 .cp-1251
 * *AddCharset CP866 * * * *.cp866
 * *AddCharset ISO-8859-5 * .iso-ru
 * *AddCharset KOI8-R * * * .koi8-r
 * *AddCharset UCS-2 * * * *.ucs2
 * *AddCharset UCS-4 * * * *.ucs4
 * *AddCharset UTF-8 * * * *.utf8

 * *# LanguagePriority allows you to give precedence to some languages
 * *# in case of a tie during content negotiation.
 * *#
 * *# Just list the languages in decreasing order of preference. We have
 * *# more or less alphabetized them here. You probably want to change this.
 * *#
 * *<IfModule mod_negotiation.c>
 * * * *LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
 * *</IfModule>

 * *#
 * *# AddType allows you to tweak mime.types without actually editing it, or to
 * *# make certain files to be certain types.
 * *#
 * *AddType application/x-tar .tgz

 * *#
 * *# AddEncoding allows you to have certain browsers uncompress
 * *# information on the fly. Note: Not all browsers support this.
 * *# Despite the name similarity, the following Add* directives have nothing
 * *# to do with the FancyIndexing customization directives above.
 * *#
 * *AddEncoding x-compress .Z
 * *AddEncoding x-gzip .gz .tgz
 * *#
 * *# If the AddEncoding directives above are commented-out, then you
 * *# probably should define those extensions to indicate media types:
 * *#
 * *#AddType application/x-compress .Z
 * *#AddType application/x-gzip .gz .tgz

 * *#
 * *# AddHandler allows you to map certain file extensions to "handlers",
 * *# actions unrelated to filetype. These can be either built into the server
 * *# or added with the Action command (see below)
 * *#
 * *# If you want to use server side includes, or CGI outside
 * *# ScriptAliased directories, uncomment the following lines.
 * *#
 * *# To use CGI scripts:
 * *#
 * *#AddHandler cgi-script .cgi

 * *#
 * *# To use server-parsed HTML files
 * *#
 * *#AddType text/html .shtml
 * *#AddHandler server-parsed .shtml

 * *#
 * *# Uncomment the following line to enable Apache's send-asis HTTP file
 * *# feature
 * *#
 * *#AddHandler send-as-is asis

 * *#
 * *# If you wish to use server-parsed imagemap files, use
 * *#
 * *#AddHandler imap-file map

 * *#
 * *# To enable type maps, you might want to use
 * *#
 * *#AddHandler type-map var

</IfModule>
# End of document types.

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web

#
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#
#MetaSuffix .meta

#
# Customizable error response (Apache style)
# *these come in three flavors
#
# * *1) plain text
#ErrorDocument 500 "The server made a boo boo.
# *n.b. *the single leading (") marks it as text, it does not get output
#
# * *2) local redirects
#ErrorDocument 404 /missing.html
# *to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# *N.B.: You can redirect to a script or a document using server-side-includes.
#
# * *3) external redirects
#ErrorDocument 402 http://www.example.com/subscription_info.html
# *N.B.: Many of the environment variables associated with the original
# *request will *not* be available to such a script.

#
# Customize behaviour based on the browser
#
<IfModule mod_setenvif.c>

 * *#
 * *# The following directives modify normal HTTP response behavior.
 * *# The first directive disables keepalive for Netscape 2.x and browsers that
 * *# spoof it. There are known problems with these browser implementations.
 * *# The second directive is for Microsoft Internet Explorer 4.0b2
 * *# which has a broken HTTP/1.1 implementation and does not properly
 * *# support keepalive when it is used on 301 or 302 (redirect) responses.
 * *#
 * *BrowserMatch "Mozilla/2" nokeepalive
 * *BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0

 * *#
 * *# The following directive disables HTTP/1.1 responses to browsers which
 * *# are in violation of the HTTP/1.0 spec by not being able to grok a
 * *# basic 1.1 response.
 * *#
 * *BrowserMatch "RealPlayer 4\.0" force-response-1.0
 * *BrowserMatch "Java/1\.0" force-response-1.0
 * *BrowserMatch "JDK/1\.0" force-response-1.0

</IfModule>
# End of browser customization directives

#
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-status>
# * *SetHandler server-status
# * *Order deny,allow
# * *Deny from all
# * *Allow from .example.com
#</Location>

#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-info>
# * *SetHandler server-info
# * *Order deny,allow
# * *Deny from all
# * *Allow from .example.com
#</Location>

#
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. *This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging 
# script on phf.apache.org. *Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
# * *Deny from all
# * *ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *:80>
# * *ServerAdmin webmaster@dummy-host.example.com
# * *DocumentRoot /www/docs/dummy-host.example.com
# * *ServerName dummy-host.example.com
# * *ErrorLog logs/dummy-host.example.com-error_log
# * *CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>

I know this sounds rude but it is not a big deal to download Apache's source and extract it so you can pick these kind of things yourself.

You know that's what I had thought, and I tried doing just that. Unfortunately I wasn't able to find any thing relevant. Heck, I even compiled apache from source but nada. I only posted here as a last resort. pete_1967 I appreciate your help.