'yet Another' Laptop Display Resolution Question

Hello SUSE Forum,

My laptop display shows a ~ 2" black border at the edges instead of filling the physical screen.

I searched through earlier posts and found that this problem is fairly common, but I still wasn't able to make any progress.

I tried using Sax2 to adjust the display parameters, but nothing I did made any difference.

The laptop is a Sony PCG-FX140, 700 MHz Pentium III, 256 MB RAM, 14.1" XGA (1024x768) LCD screen, Intel 815 EM Chipset supposedly with "integrated 3D accelerator". It's running SUSE 10.3.

I am new to openSUSE and to Linux. SUSE is running fine although it does seem necessary to boot with "apci=off". Touchpad, sound, and internet connection all work.

Thanks in advance for any ideas or help!

Here is xorg.conf:

# /.../
# SaX generated X11 config file
# Created on: 2008-05-19T10:16:00-0700.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
EndSection

Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
EndSection

Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
EndSection


Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "EmulateWheel" "on"
Option "EmulateWheelButton" "2"
Option "InputFashion" "Mouse"
Option "Name" "IBM;TPPS/2 TrackPoint"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Driver "synaptics"
Identifier "Mouse[3]"
Option "AccelFactor" "0.1"
Option "BottomEdge" "650"
Option "Buttons" "5"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "CircularScrolling" "1"
Option "Device" "/dev/input/mice"
Option "EdgeMotionMaxSpeed" "15"
Option "EdgeMotionMinSpeed" "15"
Option "Emulate3Buttons" "on"
Option "EmulateMidButtonTime" "75"
Option "FingerHigh" "17"
Option "FingerLow" "14"
Option "HorizScrollDelta" "20"
Option "InputFashion" "Mouse"
Option "LeftEdge" "120"
Option "MaxSpeed" "3"
Option "MaxTapMove" "110"
Option "MaxTapTime" "180"
Option "MinSpeed" "0.2"
Option "Name" "ALPS;Touchpad"
Option "Protocol" "auto-dev"
Option "RightEdge" "830"
Option "SHMConfig" "on"
Option "TopEdge" "120"
Option "UpDownScrolling" "1"
Option "Vendor" "Sysp"
Option "VertScrollDelta" "20"
Option "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
DisplaySize 305 230
HorizSync 29-48
Identifier "Monitor[0]"
ModelName "1024X768@60HZ"
Option "DPMS"
VendorName "--> VESA"
VertRefresh 50-60
UseModes "Modes[0]"
EndSection


Section "Modes"
Identifier "Modes[0]"
Modeline "1024x768" 64.11 1024 1080 1184 1344 768 769 772 795
Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622
Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622
Modeline "768x576" 34.96 768 792 872 976 576 577 580 597
Modeline "640x480" 23.86 640 656 720 800 480 481 484 497
EndSection


Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1024x768" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection


Section "Device"
BoardName "I815"
BusID "0:2:0"
Driver "vesa"
Identifier "Device[0]"
VendorName "Intel"
EndSection



Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Mouse[3]" "SendCoreEvents"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection


Section "DRI"
Group "video"
Mode 0660
EndSection

Section "Extensions"
EndSection

Problem solved...

sax2 -m 0=intel

...made it work!