problem with OpenSuse and Acer Aspire notebooks

Hello,
I'm a french user of OpenSuse 10.0 with an acer apsire 1692 WLMI notebook.
The problem is that when I launch the screen shutdown as if it was
disconnected but all the ther functions go. For the moment I use an
external monitor connected on the vga port of the laptop but it is not easy
to use.
How can I solve this problem?

Thank you in advance for the answer.

chamank@altern.org adjusted his/her tinfoil beanie to post:

> Hello,
> I'm a french user of OpenSuse 10.0 with an acer apsire 1692 WLMI
> notebook. The problem is that when I launch the screen shutdown as if
> it was disconnected but all the ther functions go. For the moment I
> use an external monitor connected on the vga port of the laptop but it
> is not easy to use.
> How can I solve this problem?
>
> Thank you in advance for the answer.

The most likely cause of this is that the refresh rate of you graphics
card is too high for your screen, as you have a monitor setup you can
use Yast in KDE to alter the refresh rate by choosing the vesa or an
LCD model of monitor with a specified refresh of 60hz, just make sure
that you choose a resolution that both your screen and monitor can
display.

*Important* make sure you *test* the settings before saving, if both
screens go blank on the test then leave the machine for 30 seconds and
it will revert back to the old screen.

HTH
--
Mark
Twixt hill and high water
N. Wales, UK
Novell Support Forums SysOp

I try your idea but it doesn't work, i tested with an other windows manager
and it doesn't work as with Kde. The screen which permit to users to choose
the windows manager to laucnh can't be launch. After this test I finally
conclude that was the Xservver that not recognize the screen of my
notebook. If you know another solution (or an other system such as the
Xserver) I will accept it with pleasure.
Thank for your previous answer.

chamank@altern.org adjusted his/her tinfoil beanie to post:

> I try your idea but it doesn't work, i tested with an other windows
> manager and it doesn't work as with Kde. The screen which permit to
> users to choose the windows manager to laucnh can't be launch. After
> this test I finally conclude that was the Xservver that not recognize
> the screen of my notebook. If you know another solution (or an other
> system such as the Xserver) I will accept it with pleasure.
> Thank for your previous answer.

Well in that case you need to boot to runlevel 3 with just the laptop
screen ( disconnect the external monitor ) and reconfigure with sax
like this:

boot to runlevel 3 by adding the boot parameter to the grub boot
screen, on the screen with the countdown marker and choice of OS`s
press F2 ( I think ) and a parameter line will appear where you can add
additional commands that are passed to the kernel on boot, so to get to
runlevel 3 with no X server just type:

init 3

( just the number "3" on its own would have the desired effect as well
but adding the init just reminds you what it is for )

when you get to the login prompt login as root and enter roots password
then type:

sax2 -l -r

this will start the graphics in "L"owres and "r"e-initialise the
hardware detection and see if you can re-configure you monitor from
there, you need to choose a *vesa* monitor or LCD with the right size
and a refresh rate of 60hz.

HTH


--
Mark
Twixt hill and high water
N. Wales, UK
Novell Support Forums SysOp

> chamank@altern.org adjusted his/her tinfoil beanie to post:
>
> > I try your idea but it doesn't work, i tested with an other windows
> > manager and it doesn't work as with Kde. The screen which permit to
> > users to choose the windows manager to laucnh can't be launch. After
> > this test I finally conclude that was the Xservver that not recognize
> > the screen of my notebook. If you know another solution (or an other
> > system such as the Xserver) I will accept it with pleasure.
> > Thank for your previous answer.
>
> Well in that case you need to boot to runlevel 3 with just the laptop
> screen ( disconnect the external monitor ) and reconfigure with sax
> like this:
>
> boot to runlevel 3 by adding the boot parameter to the grub boot
> screen, on the screen with the countdown marker and choice of OS`s
> press F2 ( I think ) and a parameter line will appear where you can add
> additional commands that are passed to the kernel on boot, so to get to
> runlevel 3 with no X server just type:
>
> init 3
>
> ( just the number "3" on its own would have the desired effect as well
> but adding the init just reminds you what it is for )
>
> when you get to the login prompt login as root and enter roots password
> then type:
>
> sax2 -l -r
>
> this will start the graphics in "L"owres and "r"e-initialise the
> hardware detection and see if you can re-configure you monitor from
> there, you need to choose a *vesa* monitor or LCD with the right size
> and a refresh rate of 60hz.
>
> HTH
>
>
> --
> Mark
> Twixt hill and high water
> N. Wales, UK
> Novell Support Forums SysOp
>
I tried to reinitialized hadware detection with only the laptop
screen but I have nothing. The Xserver that is launch by sax2 doesn't
works. When sax launch it, the screen shutdown shortly after without I
being able to see anything.
I have an another question: during the installation of opensuse, the laptop
screen works fine. How can it be?

chamank@altern.org adjusted his/her tinfoil beanie to post:

> I tried to reinitialized hadware detection with only the laptop
> screen but I have nothing. The Xserver that is launch by sax2 doesn't
> works. When sax launch it, the screen shutdown shortly after without I
> being able to see anything.

Try these params with sax:

sax2 --vesa 0:640x480@60hz

or

sax2 -l -m 0=radeon

( not too sure on that last one, I am no ATI expert sorry )

> I have an another question: during the installation of opensuse, the
> laptop screen works fine. How can it be?


The install uses a different way of putting graphics on the screen,
there is no X server running during install ( sort of anyway )

HTH
--
Mark
Twixt hill and high water
N. Wales, UK
Novell Support Forums SysOp

baskitcaise adjusted his/her tinfoil beanie to post:


Just found this at tuxmobil ( http://tuxmobil.org/acer.html ), I know it
refers to fedora but it shows that there can be a problem with the
graphics setup.

http://www.aalbiol.upv.es/ACER.html


I had not realised that it has a PCIe chipset in there, you kght be
better using the external monitor and grabbing the ATI drivers and
installing them, maybe they are needed for the onboard screen ( seems
funny to me but stranger things have happened at sea )

Here is a link to the ATI readme on the Suse server :

http://www.suse.de/~sndirsch/ati-installer-HOWTO.html

That is the only server I could get to here at the moment that has the
doc.

HTH

--
Mark
Twixt hill and high water
N. Wales, UK
Novell Support Forums SysOp

> baskitcaise adjusted his/her tinfoil beanie to post:
>
>
> Just found this at tuxmobil ( http://tuxmobil.org/acer.html ), I know it
> refers to fedora but it shows that there can be a problem with the
> graphics setup.
>
> http://www.aalbiol.upv.es/ACER.html
>
>
> I had not realised that it has a PCIe chipset in there, you kght be
> better using the external monitor and grabbing the ATI drivers and
> installing them, maybe they are needed for the onboard screen ( seems
> funny to me but stranger things have happened at sea )
>
> Here is a link to the ATI readme on the Suse server :
>
> http://www.suse.de/~sndirsch/ati-installer-HOWTO.html
>
> That is the only server I could get to here at the moment that has the
> doc.
>
> HTH
>
> --
> Mark
> Twixt hill and high water
> N. Wales, UK
> Novell Support Forums SysOp
>

The first command that you gave me,(sax2 --vesa 0=640x480@60Hz [I don't
"Hz" at the end because it don't recognize it if I had understood correctly
the error message]) doesn't works and the second command works but I had
nothing on the screen. I saw the links in your second message about the ati
driver but I installed it before and nothing change. For the link which
talk about acer and fedora I don't know if I can replace the Xorg.conf file
by the one that is on the website. I past the content of the Sax log file
that I saw after the first command(I don't know if everything is necessary):
/*************
SaX2 log : SaX2 version 7.1 - SVN Release: 1.49 2003/03/17
**************
SVN BUILD : 26443
:
DESCRIPTION : X11 configuration log file to collect information
: about detection, startup and configuration.
: There are three parts of logging:
: ---
: 1) INIT ( detection, 3D )
: 2) STARTUP ( xorg.conf, X11 log, glxinfo )
: 3) CONFIG ( config actions )
: ---
:
VERSION : SaX2 compiled for: [SUSE LINUX 10.0 (i586)]
PARAMETER : --vesa 0:640x480@50
:
LOG DATE : Fri Nov 11 20:47:40 CET 2005
*************/
============================
Framebuffer Info:
----------------------------
Framebuffer not active

11-Nov 20:47:40 <I> Initializing...
11-Nov 20:47:42 <I> [ Sysp: Mouse detection data
Mouse0 => Protocol : explorerps/2
Mouse0 => Device : /dev/input/mice
Mouse0 => Buttons : 5
Mouse0 => Wheel : 1
Mouse0 => Emulate : 0
Mouse0 => Name : Microsoft Wheel Mouse Optical
Mouse0 => VendorID : 0x045e
Mouse0 => DeviceID : 0x0040
Mouse0 => Profile : <undefined>

Mouse1 => Protocol : explorerps/2
Mouse1 => Device : /dev/input/mice
Mouse1 => Buttons : 3
Mouse1 => Wheel : -1
Mouse1 => Emulate : 0
Mouse1 => Name : SynPS/2 Synaptics TouchPad
Mouse1 => VendorID : 0x0212
Mouse1 => DeviceID : 0x0001
Mouse1 => Profile : synaptics
]
11-Nov 20:47:42 <I> [ Sysp: Keyboard detection data
Keyboard0 => XkbModel : pc102
Keyboard0 => XkbLayout : fr
]
11-Nov 20:47:42 <I> [ Sysp: Server detection data
Card0 => BusId : 0x1
Card0 => SlotId : 0x00
Card0 => FuncId : 0x0
Card0 => Vendor : ATI
Card0 => Device : Mobility Radeon X700 5653 (M26) (PCIE)
Card0 => VID : 0x1002
Card0 => DID : 0x5653
Card0 => Module : radeon
Card0 => BusType : AGP
Card0 => Detected : 1
Card0 => Flag : DEFAULT
Card0 => SUB-VID : 0x1025
Card0 => SUB-DID : 0x0066
Card0 => DrvProfile : Depth24
]
11-Nov 20:47:43 <I> [ Sysp: XStuff detection data
Card0 => DDC : LGP0000
Card0 => Name : LP154W01-A3K3 Monitor
Card0 => Vendor : LGP
Card0 => Primary : 01-00-0
Card0 => Chipset : <undefined>
Card0 => Vsync : 75
Card0 => Hsync : 40
Card0 => Dacspeed : 220
Card0 => Memory : 16384
Card0 => Current : 01-00-0
Card0 => RawDef : None
Card0 => Option : None
Card0 => Extension : None
Card0 => Module : radeon
Card0 => Display : CRT
Card0 => Size : 33x21
]
11-Nov 20:47:44 <I> [ Sysp: 3D detection data
Card3D0 => Install : <none>
Card3D0 => Remove : <none>
Card3D0 => Packages : <none>
Card3D0 => Active : 0
Card3D0 => Answer : no
Card3D0 => ScriptReal : <none>
Card3D0 => ScriptSoft : <none>
Card3D0 => Flag : <none>
]
11-Nov 20:47:51 <X> Startup...
11-Nov 20:47:51 <X> Startup on new Server: <:0.0>
11-Nov 20:47:51 <X> Logging File contents: /tmp/sax2-5657/xorg.conf [
# /.../
# SaX generated X11 config file
# Created on: 2005-11-11T20:47:45+0100.
#
# Version: 7.1
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [SaX2] (7.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection

Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "v4l"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection

Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "fr"
Option "XkbModel" "pc102"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "Microsoft Wheel Mouse Optical"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Driver "synaptics"
Identifier "Mouse[3]"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "InputFashion" "Mouse"
Option "Name" "Synaptics;Touchpad"
Option "Protocol" "explorerps/2"
Option "SHMConfig" "on"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
DisplaySize 330 210
HorizSync 20-34
Identifier "Monitor[0]"
ModelName "LP154W01-A3K3 MONITOR"
Option "DPMS"
VendorName "LGP"
VertRefresh 50-50
UseModes "Modes[0]"
EndSection


Section "Modes"
Identifier "Modes[0]"
EndSection


Section "Device"
BoardName "Mobility Radeon X700 5653 (M26) (PCIE)"
BusID "1:0:0"
Driver "radeon"
Identifier "Device[0]"
VendorName "ATI"
EndSection


Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection


Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Mouse[3]" "SendCoreEvents"
Screen "Screen[0]"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

]
11-Nov 20:47:56 <X> Logging File contents: /var/log/xlog [

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: SuSE Linux [ELF] SuSE
Current Operating System: Linux linux 2.6.13-15-default #1 Tue Sep 13
14:56:15 UTC 2005 i686
Build Date: 07 October 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 11 20:47:51 2005
(++) Using config file: "/tmp/sax2-5657/xorg.conf"
(==) ServerLayout "Layout[all]"
(**) |-->Screen "Screen[0]" (0)
(**) | |-->Monitor "Monitor[0]"
(**) | |-->Device "Device[0]"
(**) |-->Input Device "Keyboard[0]"
(**) |-->Input Device "Mouse[1]"
(**) |-->Input Device "Mouse[3]"
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Speedo" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin7/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/baekmuk" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/japanese" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/kwintv" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/misc/sgi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/xtest" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/truetype,/usr/X11R6/lib/X11/fonts/uni:unscaled,/usr/X11R6/lib/X11/fonts/CID,/opt/kde3/share/fonts"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) Input device list set to
"/dev/ttyS0,/dev/ttyS1,/dev/ttyS2,/dev/ttyS3,/dev/ttyS4,/dev/ttyS5,/dev/ttyS6,/dev/ttyS7,/dev/ttyS8,/dev/psaux,/dev/logibm,/dev/sunmouse,/dev/atibm,/dev/amigamouse,/dev/atarimouse,/dev/inportbm,/dev/gpmdata,/dev/mouse,/dev/usbmouse,/dev/adbmouse,/dev/input/mice,/dev/input/event0,/dev/pointer0,/dev/pointer1,/dev/pointer2,/dev/pointer3"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1025,0066 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2662 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,2664 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1025,0066 rev 04 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1025,0066 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1025,0066 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1025,0066 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1025,0066 rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 1025,0066 rev 04 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 1025,0066 rev 04 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 1025,0066 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 1025,0066 rev 04 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 1025,0066 rev 04 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5653 card 1025,0066 rev 00 class 03,00,00 hdr 00
(II) PCI: 06:01:0: chip 104c,8031 card 4000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:01:2: chip 104c,8032 card 1025,0066 rev 00 class 0c,00,10 hdr 80
(II) PCI: 06:01:3: chip 104c,8033 card 1025,0066 rev 00 class 01,80,00 hdr 80
(II) PCI: 06:03:0: chip 8086,4220 card 8086,2701 rev 05 class 02,80,00 hdr 00
(II) PCI: 06:08:0: chip 14e4,169c card 1025,0066 rev 03 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc8100000 - 0xc81fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 9: bridge is at (0:28:0), (0,9,9), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 10: bridge is at (0:28:1), (0,10,10), BCTRL: 0x0004 (VGA_EN is
cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:2), (0,2,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
[4] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]
[5] -1 0 0x00005400 - 0x000054ff (0x100) IX[B]
[6] -1 0 0x00005800 - 0x000058ff (0x100) IX[B]
[7] -1 0 0x00005c00 - 0x00005cff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xc8200000 - 0xc82fffff (0x100000) MX[B]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x40000000 - 0x41ffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:1:0), (6,7,8), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
[4] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]
[5] -1 0 0x00005400 - 0x000054ff (0x100) IX[B]
[6] -1 0 0x00005800 - 0x000058ff (0x100) IX[B]
[7] -1 0 0x00005c00 - 0x00005cff (0x100) IX[B]
(II) Bus 7 prefetchable memory range:
[0] -1 0 0x40000000 - 0x41ffffff (0x2000000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5653) rev 0, Mem
@ 0xd0000000/27, 0xc8100000/16, I/O @ 0x3000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[1] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[2] -1 0 0xc8214000 - 0xc8215fff (0x2000) MX[B]
[3] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[4] -1 0 0xc8217000 - 0xc82177ff (0x800) MX[B]
[5] -1 0 0xc8000400 - 0xc80004ff (0x100) MX[B]
[6] -1 0 0xc8000800 - 0xc80009ff (0x200) MX[B]
[7] -1 0 0xc8000000 - 0xc80003ff (0x400) MX[B]
[8] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x000020a0 - 0x000020bf (0x20) IX[B]
[11] -1 0 0x000018c0 - 0x000018cf (0x10) IX[B]
[12] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[13] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[14] -1 0 0x00001880 - 0x000018bf (0x40) IX[B]
[15] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[16] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[17] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[18] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[19] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[20] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[1] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[2] -1 0 0xc8214000 - 0xc8215fff (0x2000) MX[B]
[3] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[4] -1 0 0xc8217000 - 0xc82177ff (0x800) MX[B]
[5] -1 0 0xc8000400 - 0xc80004ff (0x100) MX[B]
[6] -1 0 0xc8000800 - 0xc80009ff (0x200) MX[B]
[7] -1 0 0xc8000000 - 0xc80003ff (0x400) MX[B]
[8] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x000020a0 - 0x000020bf (0x20) IX[B]
[11] -1 0 0x000018c0 - 0x000018cf (0x10) IX[B]
[12] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[13] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[14] -1 0 0x00001880 - 0x000018bf (0x40) IX[B]
[15] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[16] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[17] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[18] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[19] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[20] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[6] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[7] -1 0 0xc8214000 - 0xc8215fff (0x2000) MX[B]
[8] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[9] -1 0 0xc8217000 - 0xc82177ff (0x800) MX[B]
[10] -1 0 0xc8000400 - 0xc80004ff (0x100) MX[B]
[11] -1 0 0xc8000800 - 0xc80009ff (0x200) MX[B]
[12] -1 0 0xc8000000 - 0xc80003ff (0x400) MX[B]
[13] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[14] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x000020a0 - 0x000020bf (0x20) IX[B]
[18] -1 0 0x000018c0 - 0x000018cf (0x10) IX[B]
[19] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[20] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[21] -1 0 0x00001880 - 0x000018bf (0x40) IX[B]
[22] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[23] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[24] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[25] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[26] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[27] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.0.1
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 4.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "synaptics"
(II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.o
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9200PRO 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireGL D1100 (RV370) 5B65 (PCIE),
ATI Radeon Mobility M300 (M22) 5460 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE),
ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V7200 (R423) UQ (PCIE), ATI FireGL V5100 (R423) UR (PCIE),
ATI FireGL V7100 (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
ATI Radeon X850 5D4C (PCIE), ATI Radeon FireGL (R480) GL 5D50 (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Chipset ATI Mobility Radeon X700 (M26) (PCIE) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[6] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[7] -1 0 0xc8214000 - 0xc8215fff (0x2000) MX[B]
[8] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[9] -1 0 0xc8217000 - 0xc82177ff (0x800) MX[B]
[10] -1 0 0xc8000400 - 0xc80004ff (0x100) MX[B]
[11] -1 0 0xc8000800 - 0xc80009ff (0x200) MX[B]
[12] -1 0 0xc8000000 - 0xc80003ff (0x400) MX[B]
[13] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[14] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x000020a0 - 0x000020bf (0x20) IX[B]
[18] -1 0 0x000018c0 - 0x000018cf (0x10) IX[B]
[19] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[20] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[21] -1 0 0x00001880 - 0x000018bf (0x40) IX[B]
[22] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[23] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[24] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[25] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[26] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[27] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[6] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[7] -1 0 0xc8214000 - 0xc8215fff (0x2000) MX[B]
[8] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[9] -1 0 0xc8217000 - 0xc82177ff (0x800) MX[B]
[10] -1 0 0xc8000400 - 0xc80004ff (0x100) MX[B]
[11] -1 0 0xc8000800 - 0xc80009ff (0x200) MX[B]
[12] -1 0 0xc8000000 - 0xc80003ff (0x400) MX[B]
[13] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[14] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x000020a0 - 0x000020bf (0x20) IX[B]
[21] -1 0 0x000018c0 - 0x000018cf (0x10) IX[B]
[22] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[23] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[24] -1 0 0x00001880 - 0x000018bf (0x40) IX[B]
[25] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[29] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[30] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xc8100000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Mobility Radeon X700 (M26) (PCIE)" (ChipID =
0x5653)
(--) RADEON(0): Linear framebuffer at 0xd0000000
(--) RADEON(0): VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): PCI card detected
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): Port0: DDCType-1, DACType-0, TMDSType--1, ConnectorType-1
(II) RADEON(0): Port1: DDCType-1, DACType--1, TMDSType--1, ConnectorType-7
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 1, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 1, Detected Type: 0
(II) RADEON(0):
(II) RADEON(0): Primary:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- MONID
(II) RADEON(0): Secondary:
Monitor -- NONE
Connector -- LVDS
DAC Type -- Unknown
TMDS Type -- NONE
DDC Type -- MONID
(II) RADEON(0): ref_freq: 2700, min_pll: 20000, max_pll: 50000, xclk:
40000, sclk: 358.000000, mclk: 345.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=7 min=20000 max=50000; xclk=40000
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode
disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Monitor[0]: Using hsync range of 20.00-34.00 kHz
(II) RADEON(0): Monitor[0]: Using vrefresh value of 50.00 Hz
(II) RADEON(0): Clock range: 20.00 to 500.00 MHz
(II) RADEON(0): Not using default mode "640x350" (hsync out of range)
(II) RADEON(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x400" (hsync out of range)
(II) RADEON(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "720x400" (hsync out of range)
(II) RADEON(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (hsync out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (hsync out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (hsync out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "832x624" (hsync out of range)
(II) RADEON(0): Not using default mode "416x312" (hsync out of range)
(II) RADEON(0): Not using default mode "1152x768" (hsync out of range)
(II) RADEON(0): Not using default mode "576x384" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(WW) RADEON(0): Mode pool is empty
(EE) RADEON(0): No valid modes found
(II) UnloadModule: "ati"
(II) UnloadModule: "i2c"
(II) Unloading /usr/X11R6/lib/modules/libi2c.a
(II) UnloadModule: "ddc"
(II) Unloading /usr/X11R6/lib/modules/libddc.a
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(II) UnloadModule: "radeon"
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.

]

chamank@altern.org adjusted his/her tinfoil beanie to post:


> The first command that you gave me,(sax2 --vesa 0=640x480@60Hz [I
> don't "Hz" at the end because it don't recognize it if I had
> understood correctly the error message])

Sorry that "Hz" was a typo on my side, it should not have been there.

> doesn't works and the second
> command works but I had nothing on the screen. I saw the links in your
> second message about the ati driver but I installed it before and
> nothing change. For the link which talk about acer and fedora I don't
> know if I can replace the Xorg.conf file by the one that is on the
> website. I past the content of the Sax log file that I saw after the
> first command(I don't know if everything is necessary): /*************
> SaX2 log : SaX2 version 7.1 - SVN Release: 1.49 2003/03/17
> **************
> SVN BUILD : 26443
> :
> DESCRIPTION : X11 configuration log file to collect information
> : about detection, startup and configuration.
> : There are three parts of logging:
> : ---
> : 1) INIT ( detection, 3D )
> : 2) STARTUP ( xorg.conf, X11 log, glxinfo )
> : 3) CONFIG ( config actions )
> : ---
> :
> VERSION : SaX2 compiled for: [SUSE LINUX 10.0 (i586)]
> PARAMETER : --vesa 0:640x480@50
^^^^^^^^^^^^^^^^^^^^^^

Is that a typo or did you try 50Hz by mistake, 50hz will never work it
should be 60hz.




>
> Section "Monitor"
> DisplaySize 330 210
> HorizSync 20-34
> Identifier "Monitor[0]"
> ModelName "LP154W01-A3K3 MONITOR"
> Option "DPMS"
> VendorName "LGP"
> VertRefresh 50-50
^^^^^^^^^^

That should be at least 50-60 at the moment it is telling the X server
that *only* a 50hz refresh rate is possible for the monitor which will
be out of range, if you change it to 50-60 then at least it has a
choice of frequencies to choose from in the range.



> (WW) RADEON(0): Mode pool is empty
> (EE) RADEON(0): No valid modes found
> (II) UnloadModule: "ati"
> (II) UnloadModule: "i2c"
> (II) Unloading /usr/X11R6/lib/modules/libi2c.a
> (II) UnloadModule: "ddc"
> (II) Unloading /usr/X11R6/lib/modules/libddc.a
> (II) UnloadModule: "int10"
> (II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
> (II) UnloadModule: "vgahw"
> (II) Unloading /usr/X11R6/lib/modules/libvgahw.a
> (II) UnloadModule: "radeon"
> (EE) Screen(s) found, but none have a usable configuration.
>
> Fatal server error:
> no screens found

No screens because it cannot get a size with a good refresh rate.

HTH
--
Mark
Twixt hill and high water
N. Wales, UK
Novell Support Forums SysOp

> chamank@altern.org adjusted his/her tinfoil beanie to post:
>
>
> > The first command that you gave me,(sax2 --vesa 0=640x480@60Hz [I
> > don't "Hz" at the end because it don't recognize it if I had
> > understood correctly the error message])
>
> Sorry that "Hz" was a typo on my side, it should not have been there.
>
> > doesn't works and the second
> > command works but I had nothing on the screen. I saw the links in your
> > second message about the ati driver but I installed it before and
> > nothing change. For the link which talk about acer and fedora I don't
> > know if I can replace the Xorg.conf file by the one that is on the
> > website. I past the content of the Sax log file that I saw after the
> > first command(I don't know if everything is necessary): /*************
> > SaX2 log : SaX2 version 7.1 - SVN Release: 1.49 2003/03/17
> > **************
> > SVN BUILD : 26443
> > :
> > DESCRIPTION : X11 configuration log file to collect information
> > : about detection, startup and configuration.
> > : There are three parts of logging:
> > : ---
> > : 1) INIT ( detection, 3D )
> > : 2) STARTUP ( xorg.conf, X11 log, glxinfo )
> > : 3) CONFIG ( config actions )
> > : ---
> > :
> > VERSION : SaX2 compiled for: [SUSE LINUX 10.0 (i586)]
> > PARAMETER : --vesa 0:640x480@50
> ^^^^^^^^^^^^^^^^^^^^^^
>
> Is that a typo or did you try 50Hz by mistake, 50hz will never work it
> should be 60hz.
>
>
>
>
> >
> > Section "Monitor"
> > DisplaySize 330 210
> > HorizSync 20-34
> > Identifier "Monitor[0]"
> > ModelName "LP154W01-A3K3 MONITOR"
> > Option "DPMS"
> > VendorName "LGP"
> > VertRefresh 50-50
> ^^^^^^^^^^
>
> That should be at least 50-60 at the moment it is telling the X server
> that *only* a 50hz refresh rate is possible for the monitor which will
> be out of range, if you change it to 50-60 then at least it has a
> choice of frequencies to choose from in the range.
>
>
>
> > (WW) RADEON(0): Mode pool is empty
> > (EE) RADEON(0): No valid modes found
> > (II) UnloadModule: "ati"
> > (II) UnloadModule: "i2c"
> > (II) Unloading /usr/X11R6/lib/modules/libi2c.a
> > (II) UnloadModule: "ddc"
> > (II) Unloading /usr/X11R6/lib/modules/libddc.a
> > (II) UnloadModule: "int10"
> > (II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
> > (II) UnloadModule: "vgahw"
> > (II) Unloading /usr/X11R6/lib/modules/libvgahw.a
> > (II) UnloadModule: "radeon"
> > (EE) Screen(s) found, but none have a usable configuration.
> >
> > Fatal server error:
> > no screens found
>
> No screens because it cannot get a size with a good refresh rate.
>
> HTH
> --
> Mark
> Twixt hill and high water
> N. Wales, UK
> Novell Support Forums SysOp
>

When I tried 50Hz it was not a typo mistake, I tried it just to test it. I
retyped the command correctly: sax2 --vesa 0:640x480@60 but I had nothing
again. In the SaX.log file I saw that the type of monitor is "crt" I don't
know if it is important but if SaX recognize the lcd monitor as a crt can
that distort the continuation?